
Kartonaut
Jan-Philipp-Munsch/kartonaut
TVC model rocket (after BPS.space Scout F): Teensy 4.1 flight firmware, mainboard spec, project log

Frame needs to be printed using nylon/nylon with carbon fiber only exclusions being ArmAbsorber1-4 and AntenaMount/GPSConnector.
Flight controller is an open-source printed circuit board by AQUA-Warrior, from the AQUA-Warrior/fpv-drone repository on GitHub, published under the CC-BY-SA-4.0 licence. It is a 4-layer board of 37 × 37 mm with 125 parts on 161 nets, routed with 1,690 tracks and 162 vias.
It is built around the INA239AIDGSR, MS5611-01BA03 and W25Q128JVSIQ, with the AP2112K-3.3TRG1, ICM-42688-P and TPS2121RUXR among its other parts. Its parts include 46 capacitors, 33 resistors, 10 ICs, 6 diodes and 2 switches. It belongs with the robots and motor control boards and the STM32 boards of this library.
One Day You'll Look Around and See You've Created A Drone Of Your Own

This is an FPV drone made with hand picked components and a fully custom flight controller powered by the STM32F745VGT6 chip, integrating an IMU, barometer, GPS/compass, SD card blackbox, OSD and power regulation.
The main goal was to make a custom FPV drone with mapping capabilities, but we left he mapping capabilities for another project to not have to compromise with the FPV aspect of this project. We hand-picked parts and engineered a reliable and custom 30.5 x 30.5 flight controller with an expanded range of capabilities such as GPS and an SD card blackbox. Since the FPV drone is our very first hardware project, it also served as a way for us to learn hardware design. We also wanted to explore the realm of Computational Fluid Dynamics to better understand the aerodynamics of our drone, To achive our goal of having a fast but efficient FPV drone.




| # | Reference | Qty | Manufacturer | Manufacturer Part # | Value | Footprint | Description |
|---|---|---|---|---|---|---|---|
| 1 | 3V3,5V1,GND1,PA0,PA1,PA2,PA3 | 7 | - | - | Conn_01x01_Pin | TestPoint:TestPoint_Pad_D1.0mm | Generic connector, single row, 01x01, script generated |
| 2 | SD-Card1 | 1 | Würth Elektronik | 693072010801 | 693072010801 | Snapeda:693072010801 | CardConnector_SMT_MicroSD_Hinge_8pins |
| 3 | C38 | 1 | Aillen | 0603W106M250XD | 10uF | Capacitor_SMD:C_0603_1608Metric | Unpolarized capacitor |
| 4 | Y1 | 1 | huaxindianzi | 3X008000BP | 8MHZ | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | 12 MHz ±20ppm Crystal 8pF 200 Ohms 4-SMD, No Lead |
| 5 | U6 | 1 | ZHONGKEWEI | AT7456E | max7456eui+ | chips:21-0108G_U28E-5_MXM-M | - |
| 6 | Y2 | 1 | Abracon | ABM8G-27.000MHZ-18-D2Y-T | Crystal_GND24 | Crystal:Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm | Four pin crystal, GND on pins 2 and 4 |
| 7 | U3 | 1 | Diodes Incorporated | AP2112K-3.3 | AP2112K-3.3TRG1 | Package_TO_SOT_SMD:SOT-23-5 | 600mA low dropout linear regulator, with enable pin, 3.8V-6V input voltage range, 3.3V fixed positive output, SOT-23-5 |
| 8 | FB1,FB2 | 2 | Murata Electronics | BLM15AG121SN1D | 120R | Inductor_SMD:L_0402_1005Metric | Ferrite bead |
| 9 | C7,C14,C27,C36 | 4 | Murata Electronics | GCM155R71H103KA55D | 10nF | Capacitor_SMD:C_0402_1005Metric | Unpolarized capacitor |
| 10 | C1,C2,C3,C4,C5,C10,C16,C24,C25,C26,C28,C34,C35,C39,C40,C41,C42,C43 | 18 | Murata Electronics | GCM155R71H104KE02D | 100nF | Capacitor_SMD:C_0402_1005Metric | Unpolarized capacitor |
| 11 | C17,C45 | 2 | Cal-Chip Electronics, Inc. | GMC21X5R226M35NT | 22uF | Capacitor_SMD:C_0805_2012Metric | Unpolarized capacitor |
| 12 | C13 | 1 | Cal-Chip Electronics, Inc. | GMC31X7R106K50NT | 10uF | Capacitor_SMD:C_1206_3216Metric | Unpolarized capacitor |
| 13 | C11,C12 | 2 | Murata Electronics | GRM1555C1H160JA01D | 16pF | Capacitor_SMD:C_0402_1005Metric | Unpolarized capacitor |
| 14 | C29,C30 | 2 | Murata Electronics | GRM1555C1H270JA01D | 27p | Capacitor_SMD:C_0402_1005Metric | Unpolarized capacitor |
| 15 | C23 | 1 | Murata Electronics | GRM155R61C225KE11D | 2.2uF | Capacitor_SMD:C_0402_1005Metric | Unpolarized capacitor |
| 16 | C8,C9,C15,C19,C20,C21,C22,C37 | 8 | Murata Electronics | GRM155R61H105KE05D | 1uF | Capacitor_SMD:C_0402_1005Metric | Unpolarized capacitor |
| 17 | C31 | 1 | Murata Electronics | GRM155R71H473KE14D | 47nF | Capacitor_SMD:C_0402_1005Metric | Unpolarized capacitor |
| 18 | C32,C46 | 2 | Murata Electronics | GRM21BR61A476ME15L | 47uF | Capacitor_SMD:C_0805_2012Metric | Unpolarized capacitor |
| 19 | C6,C33,C44,C47 | 4 | Murata Electronics | GRM21BR61H106KE43L | 10uF | Capacitor_SMD:C_0805_2012Metric | Unpolarized capacitor |
| 20 | U9 | 1 | TDK InvenSense | ICM-42688-P | ICM-42688-P | Snapeda:PQFN50P300X250X97-14N | Accelerometer, Gyroscope, 6 Axis Sensor - Output |
| 21 | U5 | 1 | Texas Instruments | INA239AIDGSR | INA239AIDGSR | chips:VSSOP_9AIDGST_TEX-M | - |
| 22 | SW1 | 1 | C&K | JS102011SAQN | SW_SPDT | Library:SW_SPDT_CK_JS102011SAQN | Switch, single pole double throw |
| 23 | U1 | 1 | Analog Devices | LT8609AEDDM-5#TRPBF | LT8609AEDDM-5_TRPBF | LT8609AEDDM_5_TRPBF:SON50P300X300X80-11N | - |
| 24 | U10 | 1 | TE Connectivity | MS5611-01BA03 | MS5611-01BA03 | Snapeda:SON125P500X300X100-8N | Pressure Sensor 0.15PSI ~ 17.4PSI (1kPa ~ 120kPa) Absolute - 24 b 8-SMD |
| 25 | SW2 | 1 | C&K | PTS810SJS250SMTR LFS | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | Push button switch, generic, two pins |
| 26 | LED2 | 1 | QT Brightek | QBLP595-Y | LEDY | LED_SMD:LED_0402_1005Metric | Light emitting diode |
| 27 | D1 | 1 | QT Brightek | QBLP1515A-RGB2 | LED_ARGB | LED_SMD:QBLP1515A-RGB2 | RGB LED, anode/red/green/blue |
| 28 | LED0 | 1 | QT Brightek | QBLP595-IB5 | LEDB | LED_SMD:LED_0402_1005Metric | Light emitting diode |
| 29 | LED1 | 1 | QT Brightek | QBLP595-IG5-2897 | LEDG | LED_SMD:LED_0402_1005Metric | Light emitting diode |
| 30 | LED4 | 1 | QT Brightek | QBLP595-IW-2897 | LEDW | LED_SMD:LED_0402_1005Metric | Light emitting diode |
| 31 | R2,R3 | 2 | Yageo | RC0402FR-075K1L | 5.1k | Resistor_SMD:R_0402_1005Metric | Resistor |
| 32 | R1,R8,R12,R18,R22,R24,R25,R26,R27 | 9 | Yageo | RC0402FR-0710KL | 10k | Resistor_SMD:R_0402_1005Metric | Resistor |
| 33 | R5 | 1 | Yageo | RC0402FR-0710KL | 100k | Resistor_SMD:R_0402_1005Metric | Resistor |
| 34 | R7 | 1 | Yageo | RC0402FR-0710KL | 10K | Resistor_SMD:R_0402_1005Metric | Resistor |
| 35 | R4 | 1 | Yageo | RC0402FR-0718K2L | 18.2K | Resistor_SMD:R_0402_1005Metric | Resistor |
| 36 | R28 | 1 | Yageo | RC0402FR-0722RL | 22 | Resistor_SMD:R_0402_1005Metric | Resistor |
| 37 | R6 | 1 | Yageo | RC0402FR-0733KL | 33k | Resistor_SMD:R_0402_1005Metric | Resistor |
| 38 | R10,R11,R23 | 3 | Yageo | RC0402FR-0733RL | 33 | Resistor_SMD:R_0402_1005Metric | Resistor |
| 39 | R19 | 1 | Yageo | RC0402FR-0744K2L | 44.2k | Resistor_SMD:R_0402_1005Metric | Resistor |
| 40 | R13,R15,R16,R17,R20 | 5 | Yageo | RC0402FR-0747KL | 47k | Resistor_SMD:R_0402_1005Metric | Resistor |
| 41 | R30 | 1 | Yageo | RC0402FR-0768RL | 68 | Resistor_SMD:R_0402_1005Metric | Resistor |
| 42 | R9,R21 | 2 | Yageo | RC0402FR-0775RL | 75Ω | Resistor_SMD:R_0402_1005Metric | Resistor |
| 43 | R14 | 1 | Yageo | RC0402FR-07100RL | 100 | Resistor_SMD:R_0402_1005Metric | Resistor |
| 44 | R33 | 1 | Yageo | RC0402FR-07220RL | 220 | Resistor_SMD:R_0402_1005Metric | Resistor |
| 45 | R29 | 1 | Yageo | RC0402FR-07300RL | 300 | Resistor_SMD:R_0402_1005Metric | Resistor |
| 46 | R31 | 1 | Yageo | RC0402FR-07330RL | 330 | Resistor_SMD:R_0402_1005Metric | Resistor |
| 47 | R32 | 1 | Yageo | RC0402FR-07560RL | 560 | Resistor_SMD:R_0402_1005Metric | Resistor |
| 48 | Camera1 | 1 | JST | SM03B-SRSS-TB(LF)(SN) | Conn_01x03_Socket | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | Generic connector, single row, 01x03, script generated |
| 49 | GPS1,Reciever1,STM32_Diagnostic1 | 3 | JST | SM04B-SRSS-TB(LF)(SN) | Conn_01x04_Socket | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | Generic connector, single row, 01x04, script generated |
| 50 | VTX1 | 1 | JST | SM07B-SRSS-TB(LF)(SN) | Conn_01x07_Socket | Connector_JST:JST_SH_SM07B-SRSS-TB_1x07-1MP_P1.00mm_Horizontal | Generic connector, single row, 01x07, script generated |
| 51 | ESC1 | 1 | JST | SM08B-SRSS-TB(LF)(SN) | Conn_01x08_Socket | Connector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | Generic connector, single row, 01x08, script generated |
| 52 | D2 | 1 | Taiwan Semiconductor Corporation | SMF30A | D_TVS | Diode_SMD:D_SOD-123F | Bidirectional transient-voltage-suppression diode |
| 53 | L1 | 1 | Bourns Inc. | SRP4020FA-2R2M | 2.2uH | footprints:IND_SRP4020FA-2R2M_BRN | Inductor |
| 54 | MCU1 | 1 | STMicroelectronics | STM32F745VGT6 | STM32F745VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | STMicroelectronics Arm Cortex-M7 MCU, 1024KB flash, 320KB RAM, 216 MHz, 1.7-3.6V, 82 GPIO, LQFP100 |
| 55 | U2 | 1 | Texas Instruments | TPS2121RUXR | TPS2121RUXR | chips:RUX0012A | - |
| 56 | U4 | 1 | Texas Instruments | TPS3828-33QDBVRQ1 | TPS3828-33QDBVRQ1 | TPS3828-33QDBVRQ1:SOT95P280X145-5N | Automotive voltage monitor with watchdog timer |
| 57 | USB-C1 | 1 | Global Connector Technology | USB4085-GF-A | USB4085-GF-A_REVA4 | Snapeda:GCT_USB4085-GF-A_REVA4 | USB-C (USB TYPE-C) USB 2.0 Receptacle Connector 24 (16+8 Dummy) Position Through Hole, Right Angle, low cost, 3.46mm profile, 16 pin, horizontal, Top mount |
| 58 | U7 | 1 | STMicroelectronics | USBLC6-2SC6 | USBLC6-2SC6 | Snapeda:SOT95P280X145-6N | 17V Clamp 5A (8/20µs) Ipp Tvs Diode Surface Mount SOT-23-6 |
| 59 | U8 | 1 | Winbond Electronics | W25Q128JVSIQ | W25Q128JVSIQ | Snapeda:SOIC127P790X216-8N | FLASH - NOR Memory IC 128Mb (16M x 8) SPI - Quad I/O, QPI, DTR 133 MHz 8-SOIC |
| Part / Item | Category | Qty | Weight (g) | Price 1 Item | Provider | Link |
|---|---|---|---|---|---|---|
| Custom Built FC | Flight Controller | 1 | 15 | $216.75 USD | PCBWay | - |
| iFlight Xing2 2207 1855kv Motor | Motor | 4 | 126.4 | $20.99 USD | iFlight | Link |
| Flywoo GOKU GM55M 55A ESC | ESC | 1 | 24.9 | $69.99 CAD | RotorVillage | Link |
| GNB 1500mah 6S LiPo | Battery | 1 | 221 | $49.99 CAD | RotorVillage | Link |
| Gemfan 51466 Hurricane MCK V2 Tri-Blade Prop (2CW+2CCW) | Propeller | 5 | 14.4 | $4.29 CAD | RotorVillage | Link |
| Caddx Ratel PRO FPV Camera | Camera | 1 | 5.9 | $72.99 CAD | RotorVillage | Link |
| TBS Unify Pro32 HV VTX | VTX | 1 | 8.7 | $73.99 CAD | RotorVillage | Link |
| Radiomaster XR1 Receiver | Reciever | 1 | 1.5 | $22.98 CAD | RotorVillage | Link |
| GEPRC M10 Nano GPS | GPS | 1 | 8 | $27.99 CAD | RotorVillage | Link |
| GEPRC Momoda2 5.8G Antenna - LHCP UFL 110mm | GPS | 1 | 10 | $11.99 CAD | RotorVillage | Link |
| M3 Vibration Grommets | Mounting | 1 | 4 | $5.99 CAD | RotorVillage | Link |
| RadioMaster Pocket Transmitter | Transmitter | 1 | N/A | $95.99 CAD | RotorVillage | Link |
| EMAX Transporter 2 Goggles | FPV Goggles | 1 | N/A | $173.99 CAD | RotorVillage | Link |
| iFlight Smart Smoke Stopper | Boards | 1 | N/A | $11.99 CAD | RotorVillage | Link |
| RVS ISO Frame Kit | Frame | 1 | 165 | $124.99 CAD | RotorVillage | Link |
| — | ||||||
| Total USD | $928.09 |
| Item # | Part | Amount | Link | Provider | Price |
|---|---|---|---|---|---|
| 1 | 100pcs M3x12mm Hex Socket Button Head Cap Bolts Screws Alloy Steel | 1 | Link | Harfington | $9.47 |
| 2 | 10pcs M3 x 30mm Round Aluminum Column Alloy Standoff Spacer Stud | 1 | Link | Harfington | $8.39 |
| 3 | 50Pcs Knurled Insert Nuts, M3x2.5mm(L)x4.5mm(OD) Brass Female Threaded Inserts | 1 | Link | Harfington | $10.00 |
| 4 | Black - Spectrum Nylon PA6 Low Warp GF30 Filament - 1.75mm, 0.5kg | 1 | Link | 3D Printing Canada | $49.99 |
| Total | $77.85 |
It needs to be printed then assembled. Insert rubber grommets into M3 mounting holes on the flight controller board.
Frame needs to be printed using nylon/nylon with carbon fiber only exclusions being Arm_Absorber_1-4 and Antena_Mount/GPS_Connector. Each part of the frame that needs to be printed is separated in /cad-models/frame-3d-print. Once printed use soldering iron to heat up 4 brass threaded inserts (Frame Part #3) and insert into the 4 outer holes on ArmConnector. then heat up 4 more and place in corresponding holes on Base(repeat for 4 inner ones). align Arm1-4 with the Base and Arm Connector as shown.

Place M3 screws (Frame Part #1) through the 4 inserts that have been threaded. They should start from Base go through Arm1 and come out on ArmConnector then tighten [repeat for each arm].
Place 8 standoffs (Frame Part #2) on each hole of the Base as shown in the picture below.

Screw an M3 screw (Frame Part #1) through the bottom of the Base and into the standoffs.
Insert CamP1 and CamP2 as shown in the picture below.

Add Antena_Mount and GPS_Connector to the back 2 standoffs of the frame as shown below.

Add Plate to the top of the standoffs. Make sure to align holes of standoffs with holes on Plate. Place External_Cam_Holder aligned with the first 4 standoffs to the front. Insert and tighten 8 M3 screws (Frame Part #1) to connect with each standoff.

For the ESC and Flight controller screw both together with screws provided in ESC. Then screw into the 4 30.5x30.5 mounting holes on the frame.

For the Motors place Arm_Absorber_1 under the end of Arm1 with the motor on top. Then use the screws provided with the motors to screw through the absorber and arm into the motor [repeat for all motors].

For the VTX and Receiver screw the built in screws into the corresponding screws on the back of the frame. Then thread the VTX, receiver and gps antenna into GPS_Connector and Antena_Mount
For the Camera screw the screws it came with into the mounting holes on CamP1 and CamP2.

Connect each component of the drone to their corresponding connector on the ESC/FC with the built in connector. Motors will need to be soldered to ESC. Also solder the bulk capacitor to the battery pads as well as soldering the Battery connector.
Copyright © 2026 MAFK — Mark Kearney and Ahmed Farooq
This project contains materials made available under separate licenses.
| Directory | License |
|---|---|
cad-models/, flight-controller/ | CERN Open Hardware Licence Version 2 - Strongly Reciprocal — see LICENSE-HARDWARE |
journals/, openfoam/, renders/, research/, tools/ | Creative Commons Attribution-ShareAlike 4.0 International — see LICENSE-CONTENT |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C3, C4, C10, C16, C24, C25, C26, C28, C34, C35, C39, C40, C41, C42 +2 |
| 9 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R8, R12, R18, R22, R24, R25, R26, R27 |
| 8 | 1uF | Capacitor_SMD:C_0402_1005Metric | C8, C9, C15, C19, C20, C21, C22, C37 |
| 7 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_D1.0mm | 3V3, 5V1, GND1, PA0, PA1, PA2, PA3 |
| 5 | 47k | Resistor_SMD:R_0402_1005Metric | R13, R15, R16, R17, R20 |
| 4 | 10nF | Capacitor_SMD:C_0402_1005Metric | C7, C14, C27, C36 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6, C33, C44, C47 |
| 3 | 33 | Resistor_SMD:R_0402_1005Metric | R10, R11, R23 |
| 3 | Conn_01x04_Socket | Connector_JST:JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | GPS, Reciever, STM32Test |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 120R | Inductor_SMD:L_0402_1005Metric | FB1, FB2 |
| 2 | 16pF | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C17, C45 |
| 2 | 27p | Capacitor_SMD:C_0402_1005Metric | C29, C30 |
| 2 | 47uF | Capacitor_SMD:C_0805_2012Metric | C32, C46 |
| 2 | 5.1k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 75Ω | Resistor_SMD:R_0402_1005Metric | R9, R21 |
| 1 | 100 | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 10K | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 10uF | Capacitor_SMD:C_1206_3216Metric | C13 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C38 |
| 1 | 18.2K | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C23 |
| 1 | 2.2uH | footprints:IND_SRP4020FA-2R2M_BRN | L1 |
| 1 | 22 | Resistor_SMD:R_0402_1005Metric | R28 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R33 |
| 1 | 300 | Resistor_SMD:R_0402_1005Metric | R29 |
| 1 | 330 | Resistor_SMD:R_0402_1005Metric | R31 |
| 1 | 33k | Resistor_SMD:R_0402_1005Metric | R6 |
| 1 | 44.2k | Resistor_SMD:R_0402_1005Metric | R19 |
| 1 | 47nF | Capacitor_SMD:C_0402_1005Metric | C31 |
| 1 | 560 | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | 68 | Resistor_SMD:R_0402_1005Metric | R30 |
| 1 | 693072010801 | Snapeda:693072010801 | SD-Card1 |
| 1 | 8MHZ | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | AP2112K-3.3TRG1 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | Conn_01x03_Socket | Connector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal | Camera |
| 1 | Conn_01x07_Socket | Connector_JST:JST_SH_SM07B-SRSS-TB_1x07-1MP_P1.00mm_Horizontal | VTX |
| 1 | Conn_01x08_Socket | Connector_JST:JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal | ESC |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm | Y2 |
| 1 | D_TVS | Diode_SMD:D_SOD-123F | D2 |
| 1 | ICM-42688-P | Snapeda:PQFN50P300X250X97-14N | U9 |
| 1 | INA239AIDGSR | chips:VSSOP_9AIDGST_TEX-M | U5 |
| 1 | LEDB | LED_SMD:LED_0402_1005Metric | LED0 |
| 1 | LEDG | LED_SMD:LED_0402_1005Metric | LED1 |
| 1 | LEDW | LED_SMD:LED_0402_1005Metric | LED4 |
| 1 | LEDY | LED_SMD:LED_0402_1005Metric | LED2 |
| 1 | LED_ARGB | LED_SMD:QBLP1515A-RGB2 | D1 |
| 1 | LT8609AEDDM-5_TRPBF | LT8609AEDDM_5_TRPBF:SON50P300X300X80-11N | U1 |
| 1 | MS5611-01BA03 | Snapeda:SON125P500X300X100-8N | U10 |
| 1 | STM32F745VGTx | Package_QFP:LQFP-100_14x14mm_P0.5mm | MCU1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_PTS810 | SW2 |
| 1 | SW_SPDT | Library:SW_SPDT_CK_JS102011SAQN | SW1 |
| 1 | TPS2121RUXR | chips:RUX0012A | U2 |
| 1 | TPS3828-33QDBVRQ1 | TPS3828-33QDBVRQ1:SOT95P280X145-5N | U4 |
| 1 | USB4085-GF-A_REVA4 | Snapeda:GCT_USB4085-GF-A_REVA4 | USB-C1 |
| 1 | USBLC6-2SC6 | Snapeda:SOT95P280X145-6N | U7 |
| 1 | W25Q128JVSIQ | Snapeda:SOIC127P790X216-8N | U8 |
| 1 | max7456eui+ | chips:21-0108G_U28E-5_MXM-M | U6 |
The 121 most common of 125 parts.

Jan-Philipp-Munsch/kartonaut
TVC model rocket (after BPS.space Scout F): Teensy 4.1 flight firmware, mainboard spec, project log


fdiwth/tvc-drone
This repository contains the documentation, hardware designs, and source code for a Thrust Vector Control (TVC) drone.

Ben-Blair/Rocket-Build
Senior capstone project: demonstrate closed-loop lateral guidance of a high power rocket using forward canards, and handle the canard-wake-on-aft-fin interference problem correctly.


manvalan/MuonScope
Piano di rivelazione MuonScope con 16 fotodiodi VBPW34S in matrice 4×4 a passo 10 mm, per il bus MIKILAB REV5.1.


agg-85/flight-controller
Custom STM32-based flight controller using KiCad.
It measures 37 × 37 mm and has 4 copper layers, 1.6 mm thick.
125 parts, built around the INA239AIDGSR, MS5611-01BA03, W25Q128JVSIQ and AP2112K-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the AQUA-Warrior/fpv-drone repository on GitHub, at the commit this page was made from: the board is flight-controller/flight-controller/flight_controller.kicad_pcb and its schematic flight-controller/flight-controller/flight_controller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CC-BY-SA-4.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).