Skip to the content

INA239AIDGSR

Texas InstrumentsExtended

-300mV~85V -40℃~+125℃ 1.5uV 10mA 160dB 2.5nA 2.7V~5.5V 20nV/℃ 640uA High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Input filter、Power monitoring、Digital output interface、Programmable threshold alarm、Integrated ADC、Enable/shutdown function ±163.84mV VSSOP-10-0.5mm Current Sense Amplifiers ROHS

Part id
ti/INA239AIDGSR
Category
Current Sense Amplifiers
Package
VSSOP-10-0.5mm
Pins
10
In stock
10 at JLCPCB (C2876522)
Used on
5 open-source boards

Overview

The INA239AIDGSR is a current Sense Amplifier made by Texas Instruments in a VSSOP-10-0.5mm package with 10 pins. -300mV~85V -40℃~+125℃ 1.5uV 10mA 160dB 2.5nA 2.7V~5.5V 20nV/℃ 640uA High-side detection、Low-side detection、Bidirectional detection、Zero drift / auto-zero、Input filter、Power monitoring、Digital output interface、Programmable threshold alarm、Integrated ADC、Enable/shutdown function ±163.84mV VSSOP-10-0.5mm Current Sense Amplifiers ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:INA239AQDGSRQ1, from EasyEDA) and its footprint (EasyEDA_Cloud:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL, from EasyEDA), ready for a KiCad board. 10 are in stock at JLCPCB (part C2876522). 5 open-source boards in 3 repositories on GitHub use it.

Symbol

10IN+9IN–8VBUS7GND6VS5SCLK4MISO3ALERT2MOSI1CS
EasyEDA_Cloud:INA239AQDGSRQ1From EasyEDA

Footprint

EasyEDA_Cloud:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BLFrom EasyEDA

Pinout

10
The pins of the INA239AIDGSR
PinNameType
1CSUnspecified
2MOSIUnspecified
3ALERTUnspecified
4MISOUnspecified
5SCLKUnspecified
6VSUnspecified
7GNDUnspecified
8VBUSUnspecified
9IN–Unspecified
10IN+Unspecified

Open-source boards using it

5
  • 4 layers37 × 37 mmFlight controller, the printed circuit board in 3D

    Flight controller

    AQUA-Warrior/fpv-drone

    Frame needs to be printed using nylon/nylon with carbon fiber only exclusions being ArmAbsorber1-4 and AntenaMount/GPSConnector.

    125 parts3CC-BY-SA-4.0
  • 4 layers54 × 120 mmKartonaut, the printed circuit board in 3D

    Kartonaut

    Jan-Philipp-Munsch/kartonaut

    TVC model rocket (after BPS.space Scout F): Teensy 4.1 flight firmware, mainboard spec, project log

    174 partsMIT
  • 4 layers140 × 120 mmPianoMatrice, the printed circuit board in 3D

    PianoMatrice

    manvalan/MuonScope

    Piano di rivelazione MuonScope con 16 fotodiodi VBPW34S in matrice 4×4 a passo 10 mm, per il bus MIKILAB REV5.1.

    490 parts
  • 4 layers220.5 × 51 mmMuonScope, the printed circuit board in 3D

    MuonScope

    manvalan/MuonScope

    Piano di rivelazione MuonScope con 16 fotodiodi VBPW34S in matrice 4×4 a passo 10 mm, per il bus MIKILAB REV5.1.

    102 parts
  • 4 layers120 × 90 mmPianoTest, the printed circuit board in 3D

    PianoTest

    manvalan/MuonScope

    Piano di rivelazione MuonScope con 16 fotodiodi VBPW34S in matrice 4×4 a passo 10 mm, per il bus MIKILAB REV5.1.

    230 parts

Parts like it

5

Questions

Is there a KiCad symbol and footprint for the INA239AIDGSR?

Yes. The symbol is EasyEDA_Cloud:INA239AQDGSRQ1 and the footprint EasyEDA_Cloud:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the INA239AIDGSR?

VSSOP-10-0.5mm, with 10 pins. Its footprint is drawn on this page.

Where is the INA239AIDGSR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the INA239AIDGSR?

JLCPCB lists it as part C2876522, with 10 in stock; the sellers' links on this page open their listings.

What can replace the INA239AIDGSR?

Parts like it in the library: the INA381A1IDGS by Texas Instruments, the INA381A2IDGS by Texas Instruments, the INA381A1QDGSRQ1 by Texas Instruments and the INA381A4IDGS by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the INA239AIDGSR?

5 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.