
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

A modular ortho-Alice keyboard sandbox for experimenting with sensors, encoders, displays, and other hardware modules I can source.
Keyboard is an open-source printed circuit board by Apiratchai, from the Apiratchai/keyboard-playground repository on GitHub. It is a 2-layer board of 280.6 × 117.1 mm with 129 parts on 80 nets, routed with 706 tracks and 57 vias.
It is built around the 1N4148W. Its parts include 60 diodes, 60 switches and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
This directory contains the current KiCad baseline.
keyboard.kicad_pro KiCad project
keyboard.kicad_sch schematic
keyboard.kicad_pcb routed PCB and Edge.Cuts
Redragon.pretty/ custom switch and diode footprintThe board uses a 19.05 mm switch pitch and a custom mounting pattern. Keep experimental variants in a branch, checkpoint, or the original laboratory directory until they pass the geometry and DRC checks.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 60 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +44 |
| 60 | MX_Switch | Redragon:SW_Redragon_LowProfile_PCB_1.00u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +44 |
| 8 | MountingHole_2.2mm | MountingHole:MountingHole_2.2mm | MH1, MH2, MH3, MH4, MH5, MH6, MH7, MH8 |
| 1 | RaspberryPi_Pico | Module:RaspberryPi_Pico_Common_THT | U1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly



MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle


sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

It measures 280.6 × 117.1 mm and has 2 copper layers, 1.6 mm thick.
129 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Apiratchai/keyboard-playground repository on GitHub, at the commit this page was made from: the board is pcb/keyboard.kicad_pcb and its schematic pcb/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Apiratchai before reusing the design.