

Esper v1
Esp32 based eurorack module.
- Size
- 39.6 × 99.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 45
- Pads
- 191
- Tracks, vias
- 291, 144
- Pours
- 142
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Aug 2025
- Updated
- 6 Oct 2025
Overview
Esper v1 is an open-source printed circuit board by Antonio-Ciociola, from the Antonio-Ciociola/esper repository on GitHub. It is a 2-layer board of 39.6 × 99.1 mm with 44 parts on 45 nets, routed with 291 tracks and 144 vias.
It is built around the ADS8688IDB, ME6211C33M5G-N and PCM5102APW, with the BAT43 and B340A among its other parts. Its parts include 26 capacitors, 5 ICs, 3 diodes, 3 connectors and 1 resistor. It belongs with the ESP32 boards of this library.
Main components
5ADS8688IDB
TSSOP-38-40℃~+125℃ 0.75LSB 10.24V 12mA 16 17MHz 4.75V~5.25V 500kHz 6ppm/℃ 8 92dB Built-in No SAR SPI Support TSSOP-38 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADCs)ME6211C33M5G-N
SOT-23-5-40℃~+150℃ 1 120mV@(100mA) 3.3V 500mA 50uVrms 60uA 6V 70dB@(1kHz) Fixed Over Current Protection、Enable、Short Circuit Protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsPCM5102APW
TSSOP-20-25℃~+85℃ 1.8V~3.3V 2 32 384kHz 500uA 50MHz Audio Decoder Digital filtering、Power-down mode I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposeBAT43
DO-204AH-65℃~+125℃ 1 Independent 1V@0.2A 200mA 30V 4A 500nA@25V DO-204AH Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesB340A
SMA(DO-214AC)-55℃~+150℃ 1 Independent 3A 40V 500mV@3A 500uA@40V 80A SMA(DO-214AC) Schottky Diodes ROHSDiodes IncorporatedSchottky Diodes
README
README.mdEsper
An esp32 based eurorack module.

Specifications
- 8HP width
- 4 CV inputs
- 2 Audio Outputs
- Oled Display with LVGL GUI
- Rotary Encoder with Push Button
- Esp32s3 has 2 cores, Bluetooth and Wifi support
Photos

Future Plans and Issues
- Better alternative to external adc for cv inputs
- Codec chip for both audio in and out, to allow for audio processing
- The esp32s3 floating point performance is not great
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Library:C_0603_1608Metric | C13, C21, C24, C30, C31, C32, C34 |
| 5 | 10u | Library:C_0603_1608Metric | C19, C23, C25, C27, C28 |
| 4 | 10u | Library:CP_Radial_D5.0mm_P2.50mm | C11, C12, C14, C26 |
| 4 | 1n | Library:C_0603_1608Metric | C15, C16, C17, C18 |
| 3 | 1u | Library:C_0603_1608Metric | C20, C22, C29 |
| 3 | BLM18R | Library:L_0603_1608Metric | FB1, FB2, FB3 |
| 2 | 2.2u | Library:C_0603_1608Metric | C33, C35 |
| 2 | BAT43 | Library:D_SOD-123 | D6, D7 |
| 1 | 220n | Library:C_0603_1608Metric | C10 |
| 1 | ADS8688 | Library:TSSOP-38_4.4x9.7mm_P0.5mm | U4 |
| 1 | B340A | Library:D_SMA | D5 |
| 1 | Conn_02x08_Odd_Even | Library:IDC-Header_2x08_P2.54mm_Vertical | J11 |
| 1 | ESP32_S3_zero | Library:Esp32-S3 Zero | U2 |
| 1 | LM78M05_TO252 | Library:TO-252-3_TabPin2 | U3 |
| 1 | LOGO | Library:Sonic | G*** |
| 1 | M3 | Library:MountingHole_3.2mm_M3_Pad | H2 |
| 1 | ME6211C33M5 | Library:SOT-23-5 | U5 |
| 1 | PCM5102A | Library:TSSOP-20_4.4x6.5mm_P0.65mm | U6 |
| 1 | SolderJumper_3_Open | Library:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | _ | Library:R_0603_1608Metric | R13 |
| 1 | m_Out_Con | Library:PinSocket_1x07_P2.54mm_Vertical | J3 |
| 1 | m_in_Con | Library:PinSocket_1x09_P2.54mm_Vertical | J2 |
More from Antonio-Ciociola/esper
2- 2 layers80.8 × 99.1 mm

- 2 layers39.6 × 99.1 mm

Similar boards
- 4 layers285 × 94.6 mm

- 2 layers51.5 × 63 mm

Sensor Reader V4
Inverated/Proa-II-Electrical-Setup
Complete electical design and microcontroller code
70 parts - 4 layers200 × 130 mm

HVAC STM32F7 PCB
Jopolle/INZYNIERKA
W repozytorium znajdują się wszystkie istotne pliki dotyczące projektu
110 parts - 4 layers58.2 × 74.6 mm

ESP-32-DSP board
MarkusVLA/Suunnattava-suuntamikrofoni
Suunnattava suuntamikrofoni on laite, jolla voidaan elektronisesti ohjata äänityksen suuntaa käännettävän suuntauksen avulla.
85 parts - 6 layers155 × 100 mm

CM5IO második terv
NBence0/JedlikBots
Welcome to the official GitHub page of JedlikBots! 🎓🤖 We are the dedicated team of software development and robotics students from the Jedlik Ányos Technical School in Győr, Hungary.
491 parts - 4 layers104.5 × 67 mm

- 4 layers57.2 × 57.2 mm

- 2 layers128 × 70.5 mm

Questions
How big is the Esper v1 PCB?
It measures 39.6 × 99.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Esper v1 use?
44 parts, built around the ADS8688IDB, ME6211C33M5G-N, PCM5102APW and BAT43. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esper v1 KiCad files?
From the Antonio-Ciociola/esper repository on GitHub, at the commit this page was made from: the board is pcb/esper_v1/main.kicad_pcb and its schematic pcb/esper_v1/Input.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esper v1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Antonio-Ciociola before reusing the design.