4 layers100 × 100 mm
D1600e psu breakout board
antmicro/d1600e-psu-breakout
Breakout board for DELL D1600E-S0 Power Supply Unit
237 parts20Apache-2.0
4 layers394 × 110 mm
Gpu cluster backplane
antmicro/gpu-cluster-backplane4This project contains open hardware design files for a PCB supporting power distribution in a cluster composed of GPUs. This board has been derived from an open source d1600e-psu-breakout created by Antmicro.
- Size
- 394 × 110 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 616
- Nets
- 385
- Pads
- 1,795
- Tracks, vias
- 4,646, 3,885
- Pours
- 71
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 16 Nov 2023
- Updated
- 11 Dec 2025
Overview
Gpu cluster backplane is an open-source printed circuit board by antmicro, from the antmicro/gpu-cluster-backplane repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 394 × 110 mm with 616 parts on 385 nets, routed with 4,646 tracks and 3,885 vias.
It is built around the STM32G474CET6, SN74LV1T125DBVR-TP and TMCS1100A2QDRQ1, with the ADS7828E/250, BME280 and FT4232H-56Q-REEL among its other parts. Its parts include 299 resistors, 90 capacitors, 41 diodes, 38 ICs and 30 transistors. It belongs with the STM32 boards of this library.
Main components
12
STM32G474CET6
LQFP-48(7x7)-40℃~+85℃ 1.71V~3.6V 128KB 12bit 12bit 170MHz 32 Bit 38 512KB ARM Cortex-M4F Built-in FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SN74LV1T125DBVR-TP
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 1uA 2.7ns@5V,15pF 74LV 8mA 8mA Power-off isolation、Output enable、Level shifting Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, Transceivers
TMCS1100A2QDRQ1
SOIC-8-40℃~+125℃ 1.8mΩ 100mV/A 3V~5.5V 3kVrms 6.5us 6mA 80kHz Overcurrent Protection、Bidirectional detection Support ±23A SOIC-8 Current Sensors ROHSTexas InstrumentsCurrent Sensors
ADS7828E/250
TSSOP-16-40℃~+85℃ 12 15ppm/℃ 2.7V~5V 225uA 2LSB 3.4MHz 50kHz 72dB 8 Built-in Built-in I2C SAR Yes TSSOP-16 Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)
BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity Sensor
FT4232H-56Q-REEL
QFN-56-EP(8x8)-40℃~+85℃ 3.3V 4 480Mbps USB 2.0 USB to UART、USB to FIFO QFN-56-EP(8x8) USB Converters ROHSFTDIUSB Converters
SHT45-AD1B-R2
DFN-4(1.5x1.5)-40℃~+125℃ 1.08V~3.6V 16bit 1uA 8.3ms Factory temperature calibration I2C ±0.1℃ DFN-4(1.5x1.5) Temperature Sensors ROHSSensirionTemperature Sensors
SI7021-A20-GM1R
DFN-6-EP(3x3)-40℃~+125℃ 0%RH~100%RH 1.9V~3.6V 150uA I2C ±0.4℃ ±3%RH DFN-6-EP(3x3) Temperature and Humidity Sensor ROHSSilicon LabsTemperature And Humidity Sensor
LM339PW
TSSOP-14-18V~-1V、1V~18V -25℃~+85℃ 1.3us 25nA 2V~36V 2mV 36V 5nA 800uA Four channels Open Collector TTL、CMOS TSSOP-14 Comparators ROHSTexas InstrumentsComparators
MAX6643LBBAEE+
UncategorisedAnalog Devices
MB85RC1MTPNF-G-JNERE1
UncategorisedFUJITSU
ERJ2GE0R00X
0402-100ppm/℃~+600ppm/℃ -55℃~+155℃ 0Ω 100mW Thick Film Resistor 0402 Chip Resistor - Surface Mount ROHSPanasonicChip Resistor - Surface Mount
README
README.mdGPU cluster backplane
Copyright (c) 2023-2024 Antmicro
Overview
This project contains open hardware design files for a PCB supporting power distribution in a cluster composed of GPUs. This board has been derived from an open source d1600e-psu-breakout created by Antmicro. The GPU cluster backplane has been designed to be used with up to eight GPU units connected over a series thunderbolt-gpu-adapters. The design files for the board were prepared in KiCad 7.x.
Key features
- Power supply distribution between eight expansion slots
- Built-in circuitry for driving cooling fans for the GPUs
Project structure
The main directory contains KiCad PCB project files, a LICENSE and a README. The remaining files are stored in the following directories:
img- contains graphics for this READMEdoc- contains board schematics in PDF formatassets- contains visual assets for showcasing this design on Open Hardware Portal
License
This project is published under the Apache-2.0 license.
Parts
616| Qty | Value | Footprint | References |
|---|---|---|---|
| 102 | R_0R_0402 | antmicro-footprints:R_0402_1005Metric | R100, R101, R128, R129, R130, R131, R132, R133, R134, R135, R137, R138, R139, R140, R162, R164 +86 |
| 76 | R_10k_0402 | antmicro-footprints:R_0402_1005Metric | R104, R106, R107, R109, R110, R112, R113, R115, R116, R118, R119, R121, R122, R124, R125, R127 +60 |
| 61 | TP_1mm_SMD | antmicro-footprints:TP_SMD_1mm | TP1, TP2, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18, TP19, TP20, TP21, TP22, TP23 +45 |
| 56 | C_100n_0402 | antmicro-footprints:C_0402_1005Metric | C21, C24, C33, C34, C35, C36, C37, C38, C40, C100, C101, C102, C103, C104, C105, C106 +40 |
| 23 | R_4k7_0402 | antmicro-footprints:R_0402_1005Metric | R1, R21, R102, R103, R136, R141, R160, R165, R175, R186, R191, R197, R202, R208, R213, R219 +7 |
| 17 | R_100k_0402 | antmicro-footprints:R_0402_1005Metric | R27, R166, R192, R203, R214, R225, R236, R247, R272, R280, R281, R282, R283, R284, R285, R286 +1 |
| 16 | R_2R_0402 | antmicro-footprints:R_0402_1005Metric | R22, R24, R161, R163, R187, R189, R198, R200, R209, R211, R220, R222, R231, R233, R242, R244 |
| 16 | R_51k_0402 | antmicro-footprints:R_0402_1005Metric | R34, R35, R36, R37, R38, R39, R40, R41, R44, R45, R46, R47, R48, R49, R50, R51 |
| 16 | SI7613DN-T1-GE3 | antmicro-footprints:Vishay_PowerPAK_1212-8_Single | Q2, Q3, Q9, Q10, Q12, Q13, Q15, Q16, Q18, Q19, Q21, Q22, Q24, Q25, Q27, Q28 |
| 13 | BSS138PW | antmicro-footprints:SC70-3 | Q1, Q4, Q5, Q6, Q7, Q8, Q11, Q14, Q17, Q20, Q23, Q26, Q30 |
| 12 | R_5k1_0402 | antmicro-footprints:R_0402_1005Metric | R105, R108, R111, R114, R117, R120, R123, R126, R251, R255, R288, R289 |
| 12 | Spacer_Drill3.7mm_H10mm_9774100151R | antmicro-footprints:Spacer_Drill3.7mm_H10mm_9774100151R | H1, H2, H3, H4, H5, H6, H7, H8, H9, H10, H11, H12 |
| 10 | LED_G_0603_LG_L29K-G2J1-24-Z | antmicro-footprints:LED_0603_1608Metric_G | D2, D5, D12, D16, D19, D22, D25, D28, D31, D34 |
| 8 | BZT52C15-7-F | antmicro-footprints:D_SOD-123F | D4, D15, D18, D21, D24, D27, D30, D33 |
| 8 | C_10u_16V_0603 | antmicro-footprints:C_0603_1608Metric | C25, C26, C27, C28, C29, C30, C31, C32 |
| 8 | ESD5B5_0ST1G | antmicro-footprints:SOD-523_NP | D6, D17, D20, D23, D26, D29, D32, D35 |
| 8 | R_15k_0.1%_0402 | antmicro-footprints:R_0402_1005Metric | R28, R167, R193, R204, R215, R226, R237, R248 |
| 8 | SN74LV1T125DBVR | antmicro-footprints:SOT-23-5 | U33, U34, U35, U36, U37, U38, U39, U40 |
| 8 | Socket_TE_MULTI-BEAM_2x5_1-2212115-4 | antmicro-footprints:Socket_TE_MULTI-BEAM_2x5_1-2212115-4 | J1, J10, J11, J12, J13, J14, J15, J16 |
| 8 | TMCS1100A2-Q1 | antmicro-footprints:SOIC-8_3.9x4.9x1.75mm_P1.27mm | U4, U17, U21, U22, U23, U24, U25, U26 |
| 6 | C_2u2_0402 | antmicro-footprints:C_0402_1005Metric | C56, C76, C77, C80, C90, C94 |
| 6 | C_4u7_0402 | antmicro-footprints:C_0402_1005Metric | C57, C63, C64, C72, C79, C81 |
| 6 | ESD9X5.0ST5G | antmicro-footprints:SOD-923 | D36, D37, D38, D39, D42, D44 |
| 6 | R_100R_0402 | antmicro-footprints:R_0402_1005Metric | R273, R274, R275, R277, R278, R304 |
| 5 | 1N4148WS-7-F | antmicro-footprints:D_SOD-323 | D7, D8, D9, D10, D11 |
| 5 | FB_120Z_2A_Murata-BLM18PG_0603 | antmicro-footprints:FB_0603_1608Metric | FB13, FB14, FB15, FB16, FB17 |
| 5 | FB_120Z_3A_Murata-BLM18SG_0603 | antmicro-footprints:FB_0603_1608Metric | FB5, FB6, FB7, FB8, FB9 |
| 5 | Molex_KK_1x4_22-23-2041 | antmicro-footprints:Conn_Molex_KK_1x4_22-23-2041 | J3, J4, J5, J6, J23 |
| 5 | TCA9534PWR_TSSOP | antmicro-footprints:TSSOP-16_4.4x5mm_P0.65mm | U12, U13, U15, U16, U19 |
| 4 | C_22u_16V_0603 | antmicro-footprints:C_0603_1608Metric | C10, C11, C22, C23 |
| 4 | R_1M_0402 | antmicro-footprints:R_0402_1005Metric | R250, R252, R270, R276 |
| 4 | R_470R_0402 | antmicro-footprints:R_0402_1005Metric | R256, R267, R268, R269 |
| 4 | R_510k_0402 | antmicro-footprints:R_0402_1005Metric | R56, R57, R58, R59 |
| 4 | TS5A3359_VSSOP | antmicro-footprints:VSSOP-8_2.3x2mm_P0.5mm | U7, U8, U9, U10 |
| 3 | TPD2E009_SOT-9X3 | antmicro-footprints:SOT-723 | D40, D41, D43 |
| 2 | ADS7828 | antmicro-footprints:TSSOP-16_4.4x5mm_P0.65mm | U18, U20 |
| 2 | AP62301_TSOT | antmicro-footprints:TSOT23-6 | U1, U3 |
| 2 | C_10p_0402 | antmicro-footprints:C_0402_1005Metric | C91, C93 |
| 2 | C_10u_25V_0603 | antmicro-footprints:C_0603_1608Metric | C1, C14 |
| 2 | C_16p_0402 | antmicro-footprints:C_0402_1005Metric | C83, C86 |
| 2 | C_1u_16V_0402 | antmicro-footprints:C_0402_1005Metric | C45, C48 |
| 2 | C_22p_0402 | antmicro-footprints:C_0402_1005Metric | C74, C75 |
| 2 | FB_30Z_8.5A_Murata-BLM21SN_0805 | antmicro-footprints:FB_0805_2012Metric | FB3, FB4 |
| 2 | FB_600Z_0.5A_Murata-BLM18AG_0603 | antmicro-footprints:FB_0603_1608Metric | FB11, FB12 |
| 2 | JST_SH_1x4_SM04B-SRSS-TB-LF-SN | antmicro-footprints:Conn_JST_SH_1x4_SM04B-SRSS-TB-LF-SN | J18, J20 |
| 2 | JST_XH_1x2_B2B-XH-A-LF-SN | antmicro-footprints:Conn_JST_XH_1x2_B2B-XH-A-LF-SN | J2, J9 |
| 2 | LED_G_0603_KP-1608ZGC | antmicro-footprints:LED_0603_1608Metric_G | LD1, LD2 |
| 2 | L_3u3_4.1A_WE-LHMI-5030 | antmicro-footprints:L_WE-LHMI-5030 | L1, L2 |
| 2 | R_0R_0805 | antmicro-footprints:R_0805_2012Metric | R83, R84 |
| 2 | R_1k_0402 | antmicro-footprints:R_0402_1005Metric | R253, R279 |
| 2 | R_2k_0402 | antmicro-footprints:R_0402_1005Metric | R7, R300 |
| 1 | AP7370-33SA-7 | antmicro-footprints:SOT-23-3 | U27 |
| 1 | BAT-HLD-012-SMT-TR | antmicro-footprints:BAT_BAT-HLD-012-SMT-TR | BAT1 |
| 1 | BC807-25W | antmicro-footprints:SOT-323 | Q29 |
| 1 | BME280 | antmicro-footprints:LGA-8_2.5x2.5mm_BME280 | U31 |
| 1 | ESDA25P35-1U1M | antmicro-footprints:QFN-2L_1.6x1x0.55mm | D45 |
| 1 | FT4232H_VQFN | antmicro-footprints:QFN-56-1EP_8x8mm_P0.5mm | U11 |
| 1 | JST_SH_1x2_BM02B-SRSS-TB-LF-SN | antmicro-footprints:Conn_JST_SH_1x2_BM02B-SRSS-TB-LF-SN | J21 |
| 1 | LM339_TSSOP_CUSTOM_Split | antmicro-footprints:TSSOP-14_4.4x5mm_P0.65mm | U5 |
| 1 | MAX6643_QSOP | antmicro-footprints:QSOP-16_3x4.75x0.75mm_P0.5mm | U6 |
| 1 | MB85RC1MTPNF-G | antmicro-footprints:SOP-8_3.9x5.05mm_P1.27mm | U29 |
| 1 | MSS3-V-T_R | antmicro-footprints:Switch_Slide_MSS3 | SW1 |
| 1 | R_10k7_0402 | antmicro-footprints:R_0402_1005Metric | R6 |
| 1 | R_12k_0402 | antmicro-footprints:R_0402_1005Metric | R254 |
| 1 | R_330R_0402 | antmicro-footprints:R_0402_1005Metric | R2 |
| 1 | R_680R_0402 | antmicro-footprints:R_0402_1005Metric | R85 |
| 1 | R_6k34_0402 | antmicro-footprints:R_0402_1005Metric | R299 |
| 1 | Resonator_12MHz_ABM3B | antmicro-footprints:Resonator_SMD_Abracon_ABM3B_5x3.2mm | Y2 |
| 1 | Resonator_32.768kHz_ECX-31B | antmicro-footprints:Resonator_SMD_ECS_ECX-31B_3.2x1.5x0.9mm | Y3 |
| 1 | Resonator_8MHz_ABM3B | antmicro-footprints:Resonator_SMD_Abracon_ABM3B_5x3.2mm | Y4 |
| 1 | SHT45 | antmicro-footprints:Sensirion_DFN-4-1.5x1.5x0.5mm_P0.8mm | U30 |
| 1 | STM32G474CET6 | antmicro-footprints:LQFP-48_7x7mm_P0.5mm | U28 |
| 1 | Si7021 | antmicro-footprints:DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm | U14 |
| 1 | Socket_Amphenol_HPCE_2x17_10107844-002LF | antmicro-footprints:Socket_Amphenol_HPCE_2x17_10107844-002LF | J8 |
| 1 | USB-C_GCT_USB4145-03-0070-C | antmicro-footprints:USB-C_Receptacle_GCT_USB4145-03-0070-C | J17 |
| 1 | antmicro_logo | antmicro-footprints:antmicro-logo_scaled_15mm | N1 |
| 1 | oshw_logo | antmicro-footprints:oshw-logo | N2 |
Questions
How big is the Gpu cluster backplane PCB?
It measures 394 × 110 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Gpu cluster backplane use?
616 parts, built around the STM32G474CET6, SN74LV1T125DBVR-TP, TMCS1100A2QDRQ1 and ADS7828E/250. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gpu cluster backplane KiCad files?
From the antmicro/gpu-cluster-backplane repository on GitHub, at the commit this page was made from: the board is gpu-cluster-backplane.kicad_pcb and its schematic GPU-output.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gpu cluster backplane design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 6 layers70 × 50 mm
Thunderbolt pcie adapter
antmicro/thunderbolt-pcie-adapter
This project contains open hardware design files for an adapter board wrapping 4-lane (i.e. 4x) PCIe Gen 3.0 devices into a Thunderbolt 3 uplink. It is based on the Intel/JHL6340SLLSQ Thunderbolt controller.
272 parts82Apache-2.0 - 10 layers180 × 100 mm
Jetson agx thor baseboard
antmicro/jetson-agx-thor-baseboard
Open hardware baseboard for Nvidia Jetson Thor AGX T5000 System on Module
1,213 parts48Apache-2.0 - 6 layers52 × 43 mm
Cm4-lvds adapter
antmicro/cm4-baseboard-lvds-adapter
Adapter board converting MIPI DSI into LVDS with additional circuitry for integrating custom displays
155 parts7Apache-2.0 - 2 layers50 × 50 mm
- 2 layers
- 10 layers120.4 × 90 mm
Bmc reference carrier board
antmicro/dc-scm-osm-l-carrier-card
DC-SCM Card supporting OSM-L System on Modules
568 parts13Apache-2.0 - 4 layers50 × 26.5 mm
Environment sensor sip baseboard
antmicro/environment-sensor-myra-baseboard
This repository contains open hardware design files for Antmicro's Environment Sensor Board variant which includes the MYRA SiP as well as temperature, pressure and humidity sensors.
59 parts3Apache-2.0