2 layers76.2 × 50.8 mm
2 layers50 × 50 mm
Tiny2048
thip/Tiny20484An RGB LED version of the game 2048
- Size
- 50 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 94
- Pads
- 287
- Tracks, vias
- 299, 46
- Pours
- 17
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 14 Aug 2024
- Updated
- 18 Oct 2024
Overview
Tiny2048 is an open-source printed circuit board by thip, from the thip/Tiny2048 repository on GitHub. It is a 2-layer board of 50 × 50 mm with 54 parts on 94 nets, routed with 299 tracks and 46 vias.
It is built around the ESP32-S3-MINI-1-N8, MCP73831T-2ACI/OT-HXY and RT9013-33GB, with the 1TS026A-2300-0553-CT, FXL0630-6R8-M and MSS3-V-T/R among its other parts. Its parts include 19 diodes, 12 capacitors, 10 resistors, 5 ICs and 2 connectors. It belongs with the lEDs and displays boards and the ESP32 boards of this library.
Main components
8
ESP32-S3-MINI-1-N8
SMD-104.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 330mA 3V~3.6V 97mA Bluetooth5.0 ESP32-S3FN8 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi Modules
MCP73831T-2ACI/OT-HXY
SOT-23-5LBattery ManagementHXY MOSFETRT9013-33GB
SOT-23-5-40℃~+125℃@(Tj) 1 25uA 3.3V 30uVrms 400mV@(500mA) 5.5V 500mA 50dB@(10kHz) Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSRICHTEKVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
1TS026A-2300-0553-CT
SMD-4P,2.6x1.6mm-40℃~+90℃ 0.55mm 1.6mm 12V 2.3N 2.6mm 200,000 Cycles 50mA Black IP68 No Round Button SMD(SMT) Tab SPST Surface Mount,Vertical Without Bracket SMD-4P,2.6x1.6mm Tactile Switches ROHSHYPTactile Switches
FXL0630-6R8-M
SMD,7x6.6mm48mΩ 5A 6.8uH 6A Molded inductor ±20% SMD,7x6.6mm Molding Power Inductors ROHScjiangPower Inductors
MSS3-V-T/R
SMD,6.7x2.6mm-20℃~+70℃ 10,000 Cycles 2.6mm 24V 25mA 6.7mm Rectangular Columnar SPDT Surface Mount, Right Angle SMD,6.7x2.6mm Slide Switches ROHSDiptronicsSlide Switches
S2B-PH-SM4-TB(LF)(SN)
SMD,P=2mm,卧贴-25℃~+85℃ 1 100V 1x2P 2 2A 2P 2mm 5.5mm 7.9mm 8.6mm Auxiliary Solder Pin Beige Copper alloy PA PH Surface Mount, Right Angle Tin UL94V-0 SMD,P=2mm,卧贴 Wire To Board Connector ROHSJSTWire To Board Connector
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
README
README.mdTiny2048
A custom ESP32 dev board with a built in 4x4 RGB LED Matrix and accelerometer.
Built to run an RGB version of 2048 - a simple but addictive game where you try to add up to 2048 by combining matching numbers on sliding tiles.
Read more about the project at https://hackaday.io/project/197115-tiny2048
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | WS2812B-B/W | easyeda2kicad:LED-SMD_4P-L5.0-W5.0-TL_WS2812B-B | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11, LED12, LED13, LED14, LED15, LED16 |
| 3 | 100nF | easyeda2kicad:C0402 | C4, C6, C11 |
| 3 | 10k | easyeda2kicad:R0402 | R3, R4, R5 |
| 3 | 10uF | easyeda2kicad:C0402 | C1, C5, C12 |
| 3 | 1uF | easyeda2kicad:C0603 | C8, C9, C10 |
| 2 | 5.1k | easyeda2kicad:R0402 | R6, R7 |
| 1 | 1.87M | easyeda2kicad:R0402 | R1 |
| 1 | 100uF | easyeda2kicad:CAP-SMD_L7.3-W4.3-FD | C3 |
| 1 | 105450-0101 | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | USBC1 |
| 1 | 1TS026A-2300-0553-CT | easyeda2kicad:SW-SMD_4P-L2.6-W1.6-P0.75-LS3.0 | SW1 |
| 1 | 1k | easyeda2kicad:R0402 | R10 |
| 1 | 2.2uF | easyeda2kicad:C0402 | C2 |
| 1 | 22uF | easyeda2kicad:C0603 | C7 |
| 1 | 2k | easyeda2kicad:R0402 | R8 |
| 1 | 340k | easyeda2kicad:R0402 | R2 |
| 1 | 470 | easyeda2kicad:R0402 | R9 |
| 1 | Conn_01x12 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J1 |
| 1 | ESP32-S3-MINI-1-N8 | RF_Module:ESP32-S2-MINI-1 | U4 |
| 1 | FXL0630-6R8-M | easyeda2kicad:IND-SMD_L7.0-W6.6 | L1 |
| 1 | Green | easyeda2kicad:LED0402-RD_BLUE | LED18 |
| 1 | LIS3DHTR_C15134 | easyeda2kicad:LGA-16_L3.0-W3.0-P0.50-TL | U2 |
| 1 | LOGO | LOGO | G*** |
| 1 | MCP73831T-2ACI/OT | easyeda2kicad:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | U3 |
| 1 | MSS3-V-T/R | easyeda2kicad:SW-SMD_MSS3-V-T-R | SW3 |
| 1 | Orange | easyeda2kicad:LED0402-RD_ORANGE | LED17 |
| 1 | RT9013-33GB | easyeda2kicad:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | U5 |
| 1 | S2B-PH-SM4-TB(LF)(SN) | easyeda2kicad:CONN-SMD_P2.00_S2B-PH-SM4-TB-LF-SN | CN1 |
| 1 | TPS61092RSAR | easyeda2kicad:QFN-16_L4.0-W4.0-P0.65-BL-EP2.7-1 | U1 |
| 1 | USBLC6-2SC6 | easyeda2kicad:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | D2 |
The 53 most common of 54 parts.
Questions
How big is the Tiny2048 PCB?
It measures 50 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Tiny2048 use?
54 parts, built around the ESP32-S3-MINI-1-N8, MCP73831T-2ACI/OT-HXY, RT9013-33GB and 1TS026A-2300-0553-CT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tiny2048 KiCad files?
From the thip/Tiny2048 repository on GitHub, at the commit this page was made from: the board is hardware/tiny2048.kicad_pcb and its schematic hardware/tiny2048.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tiny2048 design in my own project?
Its repository states no licence, so its author keeps all rights: ask thip before reusing the design.
Similar boards
- 4 layers394 × 110 mm
Gpu cluster backplane
antmicro/gpu-cluster-backplane
This project contains open hardware design files for a PCB supporting power distribution in a cluster composed of GPUs. This board has been derived from an open source d1600e-psu-breakout created by Antmicro.
616 parts4Apache-2.0 - 2 layers74 × 37 mm
- 4 layers46 × 86.4 mm
OpenCycle
Vishvak365/OpenCycle
Everything is generated from design.py — do not hand-edit the board and then regenerate, you will lose the edit. If you do route by hand in KiCad, stop using the pipeline for that board and say so in docs/DECISIONS.md.
79 parts - 2 layers52 × 38 mm
Esp32-c3-smart scale
xmyoot/esp32-c3-smart-scale
A low-power Wi-Fi/BLE smart-scale main board, designed natively in KiCad 10. It has a 24-bit load-cell front end, USB-C Li-ion charging, an external antenna and a 35 µA standby budget.
42 parts - 4 layers54 × 63.4 mm
RaceTracker v3
jonaschramm/race-tracker
Custom PCB data logger for motorcycle racing: GPS position + IMU motion data, logged to a microSD card, with an e-Paper status display. Built around an ESP32-S3 (WiFi/BT built in) so it can also stream/sync over WiFi.
49 parts - 2 layers47.9 × 28.5 mm
Posture tracker v2
kiranj26/Posture-Tracker-Using-ESP32
Posture Correction using ESP32-MINI-1 and MU sensor (GY-521 / MPU-6050)
52 parts3MIT - 4 layers80 × 60 mm
BardsAssistant
jaylingelbach/BardAssistant
A tiny “Vicious Mockery” companion built on an ESP32-S3 DevKitM-1.
77 parts