2 layers34 × 41 mm
2 layers60 × 22 mm
Snap rev2
Anool/detect_triggercamera trigger hardware
- Size
- 60 × 22 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 31
- Pads
- 126
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 4
- Created
- 2 Nov 2017
- Updated
- 2 Nov 2017
Overview
Snap rev2 is an open-source printed circuit board by Anool, from the Anool/detect_trigger repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 60 × 22 mm with 30 parts on 31 nets.
It is built around the MDBT42Q and TPS610986DSE. Its parts include 9 capacitors, 7 resistors, 2 ICs, 2 diodes and 2 connectors. It belongs with the nRF52 and nRF5x boards of this library.
Main components
2README
README.mdThis repository contains all the KiCad based PCB design and related documentation for the wireless camera triggering device.
All the design files are licensed using Attribution 4.0 International (CC BY 4.0). Essentially similar to a BSD clause 3 license.
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10u | snap_fp:C_0805 | C2, C8, L2 |
| 2 | 100n | snap_fp:C_0805 | C3, C6 |
| 2 | 1u | snap_fp:C_0805 | C1, C4 |
| 2 | 400 | snap_fp:R_0805 | R1, R3 |
| 2 | 8.2p | snap_fp:C_0603 | C5, C7 |
| 2 | Mounting_Hole_PAD | snap_fp:MountingHole_1.7mm_M1.6 | MK1, MK2 |
| 1 | 130 | snap_fp:R_0805 | R7 |
| 1 | 15n | snap_fp:C_0603 | L1 |
| 1 | 1825910-6 | snap_fp:SMD_tactile_button | SW1 |
| 1 | 32786Hz | snap_fp:Crystal_DS10_d1.0mm_l4.3mm_Vertical | Y1 |
| 1 | 33 | snap_fp:R_0805 | R6 |
| 1 | 4.7u | snap_fp:C_0805 | L3 |
| 1 | 47k | snap_fp:R_0805 | R2 |
| 1 | 68 | snap_fp:R_0805 | R5 |
| 1 | 82 | snap_fp:R_0805 | R4 |
| 1 | AA battery | snap_fp:AA_keystone_206 | BT1 |
| 1 | CLX6F-FKC | snap_fp:LED_RGB_PLCC-6 | D1 |
| 1 | CONN_02X05 | snap_fp:prog_connect | P1 |
| 1 | IR26-21C-L110-TR8 | snap_fp:IR26-21C-L110 | D2 |
| 1 | MDBT42Q | snap_fp:mdbt42Q | U2 |
| 1 | SJ2-35863B1 | snap_fp:SJ2-35863B1-SMT | J1 |
| 1 | TPS610986 | snap_fp:WSON6_1.5x1.5mm_Pitch0.5mm | U1 |
| 1 | TSM2301 | snap_fp:TSM2301 | Q1 |
Questions
How big is the Snap rev2 PCB?
It measures 60 × 22 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Snap rev2 use?
30 parts, built around the MDBT42Q and TPS610986DSE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Snap rev2 KiCad files?
From the Anool/detect_trigger repository on GitHub, at the commit this page was made from: the board is snap_rev2_anool/snap_rev2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Snap rev2 design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Anool/detect_trigger
2- 2 layers91.7 × 68 mm
Similar boards
- 2 layers41.4 × 18.7 mm
Snap rev1
Appiko/sense_snap_hw
This repository contains all the KiCad based PCB design and related documentation for all the PCBs developed at Appiko.
30 parts2 - 2 layers100 × 100 mm
TPS610986 Module Panelize
y2kblog/TPS610986_Module
超低消費電力の昇圧型DC-DCコンバータ TPS610986 を搭載したモジュール(3.3V出力、ロードスイッチ付)
290 parts9MIT - 2 layers17.8 × 28 mm
HackaBLE
electronut/ElectronutLabs-hackaBLE
A tiny Nordic nRF52832 based board you can embed in your BLE projects.
33 parts43 - 2 layers70 × 40 mm
Scale ltc6915
IoTReady/low-power-nrf52-weighing-scale
https://iotready.co/low-power-nrf52-weighing-scale/
76 parts7 - 2 layers22.9 × 48.3 mm
- 2 layers34 × 99.9 mm
- 2 layers18.8 × 27.9 mm
- 2 layers50.8 × 22.9 mm
Adafruit nRF52 Bluefruit Feather rev G
sckim/KiCAD
휘트스톤 브리지(Wheatstone Bridge)는 저항 4개로 두 개의 분압기를 만들고, 두 중간점의 전압 차이로 저항의 균형 여부를 판단하는 회로이다. 이 예제에서는 예제 1의 흐름(회로도 → PCB)에 더해 KiCad에 내장된 SPICE 시뮬레이터(ngspice) 로 회로를 먼저 계산해 보는 방법을 익힌다.
54 partsGPL-3.0