2 layers34 × 41 mm
2 layers91.7 × 68 mm
Detect rev1
Anool/detect_triggercamera trigger hardware
- Size
- 91.7 × 68 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 39
- Nets
- 51
- Pads
- 129
- Tracks, vias
- 263, 23
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 2 Nov 2017
- Updated
- 2 Nov 2017
Overview
Detect rev1 is an open-source printed circuit board by Anool, from the Anool/detect_trigger repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 91.7 × 68 mm with 39 parts on 51 nets, routed with 263 tracks and 23 vias.
It is built around the MDBT42Q, ABS25 and HSMF-C157. Its parts include 12 capacitors, 12 resistors, 5 connectors, 3 ICs and 2 inductors. It belongs with the nRF52 and nRF5x boards of this library.
Main components
3
MDBT42Q
SMD-39P,10x16SMD-39P,10x16 New Arrivals ROHSRAYTACModulesABS25
UncategorisedAbracon
HSMF-C157
1210-40℃~+85℃ 170° 2.2V 20mA 3.2mm x 2.7mm square LED 52mW 570nm、605nm 572nm、604nm 8mcd、15mcd Discrete Diode Orange, Emerald Green Water Clear 1210 LED Indication - Discrete ROHSBroadcom LimitedLED Indication - Discrete
README
README.mdThis repository contains all the KiCad based PCB design and related documentation for the wireless camera triggering device.
All the design files are licensed using Attribution 4.0 International (CC BY 4.0). Essentially similar to a BSD clause 3 license.
Parts
39| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 47k | Resistors_SMD:R_0805 | R2, R3, R5, R6, R7, R8, R9, R10 |
| 4 | 100E | Resistors_SMD:R_0805 | R1, R4, R11, R12 |
| 4 | TST | Mounting_Holes:MountingHole_4.3mm_M4 | P2, P3, P4, P5 |
| 3 | 100n | Capacitors_SMD:C_0805 | C1, C3, C9 |
| 3 | 22u | Capacitors_SMD:C_1206 | C2, C4, C6 |
| 2 | 1u | Capacitors_SMD:C_0805 | C5, C7 |
| 2 | 300p | Capacitors_SMD:C_0805 | C11, C12 |
| 2 | 8p | Capacitors_SMD:C_0805 | C8, C10 |
| 2 | PIR | detect_trigger:PIR_TO5 | U1, U2 |
| 1 | 10u | Capacitors_SMD:C_0805 | L2 |
| 1 | 15n | Capacitors_SMD:C_0603 | L1 |
| 1 | 2xAAA | detect_trigger:AAA_holder_2468 | BT1 |
| 1 | ABS25 | detect_trigger:ABS25-32.768 | X1 |
| 1 | CONN_02X05 | detect_trigger:Berg_5x2Conn | P1 |
| 1 | HSMF-C157 | detect_trigger:HSMF-C15x | D1 |
| 1 | MDBT42Q | detect_trigger:mdbt42Q | U3 |
| 1 | NFC_Antenna | Connect:GS2 | AE1 |
| 1 | TSM2301 | detect_trigger:TSM2301 | Q1 |
Questions
How big is the Detect rev1 PCB?
It measures 91.7 × 68 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Detect rev1 use?
39 parts, built around the MDBT42Q, ABS25 and HSMF-C157. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Detect rev1 KiCad files?
From the Anool/detect_trigger repository on GitHub, at the commit this page was made from: the board is detect_rev1/detect_rev1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Detect rev1 design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Anool/detect_trigger
2- 2 layers60 × 22 mm
Similar boards
- 2 layers41.4 × 18.7 mm
Snap rev1
Appiko/sense_snap_hw
This repository contains all the KiCad based PCB design and related documentation for all the PCBs developed at Appiko.
30 parts2 - 2 layers76.2 × 76.2 mm
- 2 layers17.8 × 28 mm
HackaBLE
electronut/ElectronutLabs-hackaBLE
A tiny Nordic nRF52832 based board you can embed in your BLE projects.
33 parts43 - 2 layers70 × 40 mm
Scale ltc6915
IoTReady/low-power-nrf52-weighing-scale
https://iotready.co/low-power-nrf52-weighing-scale/
76 parts7 - 2 layers22.9 × 48.3 mm
- 2 layers34 × 99.9 mm
- 2 layers18.8 × 27.9 mm
- 2 layers50.8 × 22.9 mm
Adafruit nRF52 Bluefruit Feather rev G
sckim/KiCAD
휘트스톤 브리지(Wheatstone Bridge)는 저항 4개로 두 개의 분압기를 만들고, 두 중간점의 전압 차이로 저항의 균형 여부를 판단하는 회로이다. 이 예제에서는 예제 1의 흐름(회로도 → PCB)에 더해 KiCad에 내장된 SPICE 시뮬레이터(ngspice) 로 회로를 먼저 계산해 보는 방법을 익힌다.
54 partsGPL-3.0