2 layers91.7 × 68 mm
2 layers34 × 41 mm
Sense rev2
Anool/detect_triggercamera trigger hardware
- Size
- 34 × 41 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 29
- Pads
- 117
- Tracks, vias
- 285, 15
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20170922)
- Created
- 2 Nov 2017
- Updated
- 2 Nov 2017
Overview
Sense rev2 is an open-source printed circuit board by Anool, from the Anool/detect_trigger repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 34 × 41 mm with 48 parts on 29 nets, routed with 285 tracks and 15 vias.
It is built around the TLV8801DBV, TPS61098DSE and TPS70630DBV. Its parts include 17 capacitors, 16 resistors, 6 ICs, 4 connectors and 1 diode.
Main components
3
TLV8801DBV
SOT-23-5-40℃~+125℃ 0.1pA 0.1pA 1 1.5V/ms 1.7V~5.5V 1uV/℃ 340nV/√Hz@100Hz 4.5mV 4.7mA 450nA 6kHz 87dB Built-in compensation、EMI filtering/RF suppression Rail-to-rail output SOT-23-5 Operational Amplifier ROHSTexas InstrumentsOperational Amplifier
TPS61098DSE
WSON-6(1.5x1.5)-40℃~+125℃@(TJ) 2 300nA 4.3V 700mV~4.5V Boost Boost Built-in Fixed Yes WSON-6(1.5x1.5) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersTPS70630DBV
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 190uVrms 1uA 3V 6.5V 650mV@(50mA) 80dB@(10Hz) Fixed Over Current Protection、Thermal shutdown、Enable control、Input under-voltage protection、Reverse-polarity current protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdThis repository contains all the KiCad based PCB design and related documentation for the wireless camera triggering device.
All the design files are licensed using Attribution 4.0 International (CC BY 4.0). Essentially similar to a BSD clause 3 license.
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 47k | Capacitors_SMD:C_0805 | R1, R2, R3, R4, R6, R7, R11, R12, R14 |
| 8 | 10u | Capacitors_SMD:C_0805 | C1, C2, C6, C8, C10, C12, C13, C16 |
| 6 | 100n | Capacitors_SMD:C_0805 | C3, C5, C9, C14, C15, C17 |
| 4 | 1M | Capacitors_SMD:C_0805 | R5, R8, R9, R10 |
| 4 | TST | Mounting_Holes:MountingHole_2.2mm_M2_DIN965 | P1, P2, P3, P4 |
| 2 | 10n | Capacitors_SMD:C_0805 | C4, C7 |
| 2 | TLV8801 | TO_SOT_Packages_SMD:SOT-23-5 | U2, U3 |
| 1 | 0E | Capacitors_SMD:C_0201 | R16 |
| 1 | 100p | Capacitors_SMD:C_0805 | C11 |
| 1 | 390E | Capacitors_SMD:C_0805 | R15 |
| 1 | 4.7u | Capacitors_SMD:C_0805 | L1 |
| 1 | 400 | Capacitors_SMD:C_0805 | R13 |
| 1 | Batt | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.54mm | BT1 |
| 1 | D | Diodes_SMD:D_1206 | D1 |
| 1 | Jumper_NC_Dual | Pin_Headers:Pin_Header_Straight_1x03_Pitch1.00mm_SMD_Pin1Left | JP1 |
| 1 | PIR | detect_trigger:PIR_TO5 | U1 |
| 1 | TPS61098 | Housings_SON:WSON6_1.5x1.5mm_Pitch0.5mm | U4 |
| 1 | TPS70630 | TO_SOT_Packages_SMD:SOT-23-5 | U6 |
| 1 | TSM2301 | TO_SOT_Packages_SMD:SOT-23 | Q1 |
| 1 | hackaBLE_half | detect_trigger:hackable_footprint_half | U5 |
Questions
How big is the Sense rev2 PCB?
It measures 34 × 41 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sense rev2 use?
48 parts, built around the TLV8801DBV, TPS61098DSE and TPS70630DBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sense rev2 KiCad files?
From the Anool/detect_trigger repository on GitHub, at the commit this page was made from: the board is sense_rev2/sense_rev2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sense rev2 design in my own project?
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from Anool/detect_trigger
2- 2 layers60 × 22 mm
Similar boards
- 2 layers40 × 79.6 mm
ESP32 Transmitter and Receiver
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
48 parts915 - 2 layers
Demo
adamws/kicad-kbplacer
KiCad plugin for automatic keyboard's key placement and routing
48 parts547GPL-3.0 - 2 layers18.8 × 18.1 mm
- 2 layers48.1 × 115.6 mm
- 2 layers106 × 55 mm
Endcap
softerhardware/Hermes-Lite2
A second generation low-cost amateur HF software defined radio transceiver.
48 parts384 - 2 layers42.8 × 88 mm
18650 pcb
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
48 parts253GPL-3.0 - 2 layers34 × 44 mm
Clk lo buffer
loxodes/vna
Under development open hardware microwave vector network analyzer
48 parts205 - 2 layers70.6 × 189.2 mm
Nano
fellesverkstedet/fabricatable-machines
Motion systems for flexible digital fabrication and research. Easy to fabricate and customize. Documentation: https://github.com/fellesverkstedet/fabricatable-machines/wiki
48 parts175