Skip to the content
2 layers93.8 × 39.5 mmControl, the printed circuit board in 3D

A unique clock made with thermochromic paint

Size
93.8 × 39.5 mm
Copper layers
2
Thickness
0.8 mm
Parts
58
Nets
65
Pads
203
Tracks, vias
383, 44
Pours
3
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
9 Mar 2025
Updated
3 Oct 2025

Overview

Control is an open-source printed circuit board by anneosaur, from the anneosaur/paper-sunshine-clock repository on GitHub. It is a 2-layer board of 93.8 × 39.5 mm with 58 parts on 65 nets, routed with 383 tracks and 44 vias.

It is built around the ATMEGA328PB-AU, DS18B20U and DS3231MZ/V+, with the DMN2020LSN-7-VB, SI2393DS-T1-GE3-HXY and 3000TR among its other parts. Its parts include 22 resistors, 10 transistors, 7 capacitors, 6 fuses and 4 ICs. It belongs with the lEDs and displays boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

8

README

README.md

paper sunshine clock

IMG_0079

This project is a clock that tells time in a unique way. The face of the display looks like the sun with 12 rays representing 12 o’clock to 11 o’clock, going clockwise, which turn from black to yellow as the day progresses. Each ray is divided up into half hour segments, so the clock is able to tell you the current half hour. For example in the photo above, the clock is reading between 9 o’clock and 9:30. The display is made out of paper and uses thermochromic paint that changes color with heat. There is a thin circuit board behind the paper which provides the warmth to activate the thermochromic paint, changing the color of the rays. The clock also has Sparkle Mode, which will turn on a random ray every 10 seconds. It provides an entertaining show as the rays turn on and fade away (see Videos below). The enclosure is 3D printed.

https://github.com/user-attachments/assets/e0f1c668-d030-4747-b99e-f9c4dc16aae8


Reading the clock

The clock has 12 rays, representing 12 hours from 12 o'clock to 11 o'clock. Each ray is divided up into half hour segments. As each half hour of the day passes, the corresponding segment will turn from black to yellow. The clock face is fully yellow between 11:30-11:59. At 12:00, it'll reset.

face_diagram

How it works

The clock works by using thermochromic paint screen printed onto a piece of Japanese awagami paper. Behind that, is a flex PCB with large resistors mounted on the back. These resistors can be selectively turned on, warming up the paper and activating the thermochromic paint. Each ray on the PCB is a copper pour used to spread and hold heat from the resistors. It was designed using Python and an SVG drawing library, and converted into a KiCad footprint.

display_front_sm display_back_sm

The control board is driven by an Atmega328PB and uses a DS3231MZ RTC for accurate time keeping. A coin cell battery is used to keep track of time even when the clock is unpowered. The time is initially set when programming the clock, and can be changed in +/- 30 minute increments using the two buttons on the back.

control_pcb_sm

It uses a multiplexing system which allows the 24 segments to be controlled with 10 connections. The rays of the clock are divided in 3 groups, with 4 rays each. Each group has a top and bottom ground connection connecting the rays (allowing the half hour segments to be individually controlled). The “similar” rays of each group (e.g., the first ray of each group, the second ray of each group, etc) have a shared 5v connection. So for example, to turn on the segment representing the first half hour of 12 o’clock, ground the bottom connection of the first group and apply 5v to the first ray.

display_schematic

For safety (since we’re applying heat to paper here), I used an eFuse to clamp the input voltage at 5v. There are also SMD fuses to prevent against excessive current going through the segments.

In order to keep the rays at the proper temperature to activate the thermochromic paint (ideally around 90-95 F / 32-35 C), a temperature sensor reads the ambient temperature and will PWM the display to maintain a reasonably consistent temperature. This actually got a bit complicated, since the heat from the display would warm up the back compartment where the control PCB is and influence the temperature sensor. Fortunately, the temperature increases were fairly predicable and could be compensated for. From testing, the clock works well in room temperatures between 65-80 F / 18-27 C.

back_sm front_side_sm side_sm

Videos

Startup sequence

5 minutes of Sparkle Mode in real time

Parts

58
QtyValueFootprintReferences
1310kResistor_SMD:R_0805_2012MetricR1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R13, R14, R17
6DMN2020LSN-7Clock:SOT95P285X130-3NQ5, Q6, Q7, Q8, Q9, Q10
6FuseFuse:Fuse_0603_1608MetricF1, F2, F3, F4, F5, F6
40.1uFCapacitor_SMD:C_0805_2012MetricC2, C3, C4, C8
4SI2393DS-T1-GE3Clock:SOT95P237X112-3NQ1, Q2, Q3, Q4
34.7kResistor_SMD:R_0805_2012MetricR11, R12, R20
21uFCapacitor_SMD:C_0805_2012MetricC1, C6
2400kResistor_SMD:R_0805_2012MetricR21, R22
25.1kResistor_SMD:R_0805_2012MetricR15, R16
12.2uFCapacitor_SMD:C_0805_2012MetricC5
13000TRClock:BAT_3000TRBT1
1500Resistor_SMD:R_0805_2012MetricR19
160Resistor_SMD:R_0805_2012MetricR18
1AP2210N-3.3TRG1Clock:SOT95P282X145-3ND5
1ATmega328PB-APackage_QFP:TQFP-32_7x7mm_P0.8mmU6
1Conn_01x10_PinClock:CON10_SMT-RA_FCC-FPC2J3
1Conn_02x04_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x04_P1.27mm_VerticalJ4
1DS18B20UPackage_SO:MSOP-8_3x3mm_P0.65mmU1
1DS3231MZPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU2
1LEDLED_SMD:LED_0805_2012MetricD1
1SparkleButton_Switch_THT:SW_PUSH_6mmSW1
1TPS259621DDATClock:IC_TPS259621DDATU3
1Time AdjButton_Switch_THT:SW_PUSH_6mmSW2
1USB4125-GF-A-0190Clock:GCT_USB4125-GF-A-0190_REVA2J2
1Val**Clock:control_pcb_outlineRef**

Similar boards

  • 2 layers184 × 107.5 mmMultiprise pilotée, the printed circuit board in 3D

    Multiprise pilotée

    INSA-GEI/insa-gei

    INSA-GEI top level repository

    47 partsGPL-3.0
  • 2 layers27.4 × 58.7 mmLc29h mikrobus PCB, the printed circuit board in 3D

    Lc29h mikrobus PCB

    i2hm/micro_climate_station

    Open the KiCad project using KiCad 7 and above.

    48 parts3
  • 4 layers72 × 55 mmExhaust mic, the printed circuit board in 3D

    Exhaust mic

    HasiKe/Exhaust-Mic

    Motorcycle Exhaust and Intake Microphone for best soud on Videos.

    135 parts
  • 2 layers40 × 30 mm0005 RTC Module DS1307, the printed circuit board in 3D

    0005 RTC Module DS1307

    memetteminarslan/0005_RTC_Module_DS1307

    You are seeing a large number of widely used RTC modules in electronic development kits. More information coming soon...

    9 parts
  • 4 layers95.5 × 95 mmTallyLight Panel, the printed circuit board in 3D

    TallyLight Panel

    SamuelEames/TallySystems

    Tally light system for vMix using Arduino USB MIDI controller, transmitting tally light data to receiver modules on cameras using NRF24L01 radios

    192 parts
  • 2 layers98 × 60 mmNightStandClock, the printed circuit board in 3D

    NightStandClock

    LucasCanete/BasicClock

    A clock that shows the time and additionally the temperature and humidity

    64 parts
  • 4 layers74 × 36.3 mmLoudcardsdevice, the printed circuit board in 3D

    Loudcardsdevice

    gelotek-com/Anki-In-Hardware

    Building a physical flashcard device inspired by Anki and spaced repetition.

    87 parts2
  • 4 layers49 × 80 mm70MHz Soil Sensor, the printed circuit board in 3D

    70MHz Soil Sensor

    jhns-de/70MHz-Soil-Sensor

    Soil moisture and electrical conductivity (EC) sensor based on 70 MHz impedance measurement, developed as part of my master’s thesis.

    130 parts2

Questions

How big is the Control PCB?

It measures 93.8 × 39.5 mm and has 2 copper layers, 0.8 mm thick.

What parts does the Control use?

58 parts, built around the ATMEGA328PB-AU, DS18B20U, DS3231MZ/V+ and DMN2020LSN-7-VB. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Control KiCad files?

From the anneosaur/paper-sunshine-clock repository on GitHub, at the commit this page was made from: the board is pcbs/control/control.kicad_pcb and its schematic pcbs/cable/cable.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Control design in my own project?

Its repository states no licence, so its author keeps all rights: ask anneosaur before reusing the design.