Skip to the content
4 layers24.3 × 24 mmMini base v2, the printed circuit board in 3D
Size
24.3 × 24 mm
Copper layers
4
Thickness
1.6 mm
Parts
36
Nets
53
Pads
142
Tracks, vias
299, 52
Pours
2
Routed
Yes
KiCad
KiCad 8.0 (file 20240108)
Created
15 Oct 2023
Updated
9 Jul 2025

Overview

Mini base v2 is an open-source printed circuit board by anichno, from the anichno/tabletop-mini-tracker repository on GitHub. It is a 4-layer board of 24.3 × 24 mm with 36 parts on 53 nets, routed with 299 tracks and 52 vias.

It is built around the BC832 and OPT4001DTSR. Its parts include 11 resistors, 9 capacitors, 4 ICs, 3 connectors and 1 diode.

Main components

2

Parts

36
QtyValueFootprintReferences
610kResistor_SMD:R_0603_1608MetricR6, R7, R8, R9, R10, R11
40.1uFCapacitor_SMD:C_0603_1608MetricC6, C7, C8, C9
31kResistor_SMD:R_0603_1608MetricR1, R2, R3
2100 uFCapacitor_SMD:C_1206_3216MetricC4, C5
212pFCapacitor_SMD:C_0603_1608MetricC1, C2
2800kResistor_SMD:R_0603_1608MetricR4, R5
2OPT4001DTSRanichno:OPT4001U3, U4
132.768KHzCrystal:Crystal_SMD_2012-2Pin_2.0x1.2mmY1
14.7uFCapacitor_SMD:C_0603_1608MetricC3
1BC832anichno:BC832U1
1DISABLE_BATT_MEASUREJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP2
1Debug HeaderConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ2
1Ext PwrConnector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical_SMDJ3
1GND_DETECTJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP1
1LSM6DSOXTRanichno:LSM6DSOXTRU2
1Micro Bypass HeaderConnector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical_SMDJ1
1NRF_DISABLEJumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mmJP3
1Status LEDanichno:LED_19-237_R6GHBHC-A01_2TD1

The 32 most common of 36 parts.

More from anichno/tabletop-mini-tracker

6

Similar boards

  • 4 layers95.9 × 72 mmSX70z Normal, the printed circuit board in 3D

    SX70z Normal

    ZeshuLiu/SX70z

    SX-70 电子化机身主控 | Electronic Polaroid SX-70 Controller 基于 ESP32 的宝丽来 SX-70 相机控制模块,替换原装机头控制器。 支持自动测光曝光、B/T/手动模式、闪光灯同步、BLE+WiFi配网、OTA升级。 配备 128×32 OLED 机身控制器显示 EV 和快门速度,3D 按键交互。 Firmware: GPLv3 Hardware: CERN-OHL-S 2.0

    52 parts10
  • 2 layers24.4 × 24.4 mmMinimal watch, the printed circuit board in 3D

    Minimal watch

    bkarl/minimal-watch

    minimalistic smartwatch

    40 parts
  • 8 layersSportwatch revA, the printed circuit board in 3D

    Sportwatch revA

    slimmpylk/Skoll_Ultra

    a custom outdoor and endurance-sports smartwatch.

    184 parts
  • 2 layers29 × 23 mmMCU, the printed circuit board in 3D

    MCU

    Ironman-007/Digital_Artifact

    Input devices: - mouse encoder: https://www.amazon.com/gp/product/B0CF9FS3QS/ref=ppxyodtbasintitleo00s00?ie=UTF8&psc=1 - thumb joystick: https://www.adafruit.com/product/5628 - thumbwheel: -…

    36 parts1
  • 2 layers90 × 96 mmBloo, the printed circuit board in 3D

    Bloo

    Maahi-V/26-27-UCI-Kit-Micromouse

    Kit Mouse Schematic and Layout for the 2026-27 Micromouse IEEE program

    95 parts
  • 2 layers92.8 × 94.6 mmMouse2 rev1, the printed circuit board in 3D

    Mouse2 rev1

    vqxel/RezqMicromouse

    116 parts
  • 2 layersCurrent Source flexPCB, the printed circuit board in 3D

    Current Source flexPCB

    wenli-web/Hydrogen-evolution-in-hydrogel-electrochemical-cell

    This is a repository of Flexible PCB control over hydrogen generation device and python code for video and data analysis

    33 parts
  • 4 layers24.4 × 24.4 mmOSO SWAT C1-rounded, the printed circuit board in 3D

    OSO SWAT C1-rounded

    joeycastillo/Sensor-Watch

    A board replacement for the classic Casio F-91W wristwatch

    36 parts2.1k

Questions

How big is the Mini base v2 PCB?

It measures 24.3 × 24 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Mini base v2 use?

36 parts, built around the BC832 and OPT4001DTSR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Mini base v2 KiCad files?

From the anichno/tabletop-mini-tracker repository on GitHub, at the commit this page was made from: the board is schematics_and_boards/mini base v2/mini base v2.kicad_pcb and its schematic schematics_and_boards/battery_mount/battery_mount.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Mini base v2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask anichno before reusing the design.