
SX70z Normal
ZeshuLiu/SX70z
SX-70 电子化机身主控 | Electronic Polaroid SX-70 Controller 基于 ESP32 的宝丽来 SX-70 相机控制模块,替换原装机头控制器。 支持自动测光曝光、B/T/手动模式、闪光灯同步、BLE+WiFi配网、OTA升级。 配备 128×32 OLED 机身控制器显示 EV 和快门速度,3D 按键交互。 Firmware: GPLv3 Hardware: CERN-OHL-S 2.0
Texas InstrumentsExtended
-40℃~+85℃ 0.6mm 1.6V~3.6V 1.9mm 2.1mm 2uA I2C Light Intensity SOT-5X3 Ambient Light Sensors ROHS
The OPT4001DTSR is an ambient Light Sensor made by Texas Instruments in a SOT-5X3 package with 8 pins. -40℃~+85℃ 0.6mm 1.6V~3.6V 1.9mm 2.1mm 2uA I2C Light Intensity SOT-5X3 Ambient Light Sensors ROHS.
PCBKit's library has its KiCad symbol (OPT4001DTSR:OPT4001DTSR, from Antmicro) and its footprint (sot-583:SOT-583, from Antmicro), ready for a KiCad board. 61 are in stock at JLCPCB (part C17612395). 4 open-source boards in 4 repositories on GitHub use it.
| Pin | Name | Type |
|---|---|---|
| 1 | VDD | Power in |
| 2 | ADDR | Input |
| 3 | NC | Not connected |
| 4 | GND | Power in |
| 5 | SCL | Input |
| 6 | NC | Not connected |
| 7 | INT | Input/output |
| 8 | SDA | Input/output |

ZeshuLiu/SX70z
SX-70 电子化机身主控 | Electronic Polaroid SX-70 Controller 基于 ESP32 的宝丽来 SX-70 相机控制模块,替换原装机头控制器。 支持自动测光曝光、B/T/手动模式、闪光灯同步、BLE+WiFi配网、OTA升级。 配备 128×32 OLED 机身控制器显示 EV 和快门速度,3D 按键交互。 Firmware: GPLv3 Hardware: CERN-OHL-S 2.0


Yes. The symbol is OPT4001DTSR:OPT4001DTSR and the footprint sot-583:SOT-583, both drawn on this page. PCBKit places them on a board for you when you design with it.
SOT-5X3, with 8 pins. Its footprint is drawn on this page.
Texas Instruments publishes it: the Datasheet link on this page opens it.
JLCPCB lists it as part C17612395, with 61 in stock; the sellers' links on this page open their listings.
4 boards in 4 repositories on GitHub; the most starred are listed on this page, with their KiCad files.