
Module do
andreili/STM32-PLC
The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.

The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
Module di is an open-source printed circuit board by andreili, from the andreili/STM32-PLC repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 89.5 × 62.2 mm with 122 parts on 108 nets, routed with 743 tracks and 103 vias.
It is built around the NSI45020 and TLP291-4. Its parts include 66 diodes, 20 resistors, 19 capacitors, 6 connectors and 5 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | LED | LEDs:LED_0603 | D3, D11, D12, D15, D16, D19, D20, D23, D24, D27, D28, D31, D32, D35, D36, D39 +16 |
| 18 | 100n | Capacitors_SMD:C_0805 | C1, C2, C5, C6, C7, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20 +2 |
| 16 | 1N4007 | Diodes_SMD:D_SOD-123 | D2, D6, D10, D14, D18, D22, D26, D30, D34, D38, D42, D46, D50, D54, D58, D62 |
| 16 | 27 | Resistors_SMD:R_0805 | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 16 | NSI45020 | Diodes_SMD:D_SOD-123 | D1, D5, D9, D13, D17, D21, D25, D29, D33, D37, D41, D45, D49, D53, D57, D61 |
| 4 | TLP291-4 | SMD_Packages:SO-16-N | U2, U3, U4, U5 |
| 2 | 10k | Resistors_SMD:R_0805 | R1, R20 |
| 2 | 1k | Resistors_SMD:R_0805 | R18, R19 |
| 1 | 4,7u 10v | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Reflow | C3 |
| 1 | BOOT0 | Connect:GS2 | J1 |
| 1 | DEBUG | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.00mm | P1 |
| 1 | DI_0 | Connectors_Phoenix:PhoenixContact_MC-G_10x3.81mm_Angled | P2 |
| 1 | DI_1 | Connectors_Phoenix:PhoenixContact_MC-G_10x3.81mm_Angled | P3 |
| 1 | MOD_IN | Projects:Pin_Header_2.00mm_SMD | P4 |
| 1 | SFL | LEDs:LED_0603 | D66 |
| 1 | SOK | LEDs:LED_0603 | D65 |
| 1 | STM32F103C8Tx | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U1 |
| 1 | UART1 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.00mm | J2 |
The 116 most common of 122 parts.

andreili/STM32-PLC
The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.

andreili/STM32-PLC
The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.

andreili/STM32-PLC
The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.

andreili/STM32-PLC
The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.




makeitlabs/doorbot
Doorbot is an RFID access control platform, primarily intended for exterior doors in a makerspace environment. Based on Raspberry Pi 3b+, PoE hat, and a custom interface hat.



kanestoboi/lightningtrigger
A lightning detection tool for high-speed DSLR photography

Sl-Alex/grblHAL_BlackPill_F4xx_breakout
grblHAL breakout for F411 (Black Pill)
It measures 89.5 × 62.2 mm and has 2 copper layers, 1.6 mm thick.
122 parts, built around the NSI45020 and TLP291-4. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the andreili/STM32-PLC repository on GitHub, at the commit this page was made from: the board is hardware/hw_di16/module_di.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).