

A STM32 CCD camera
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 92
- Nets
- 130
- Pads
- 522
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 5 (file 20160815)
- Created
- 7 Dec 2016
- Updated
- 13 Dec 2016
Overview
Mcu is an open-source printed circuit board by trlsmax, from the trlsmax/stm32_ccd_camera repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board with 92 parts on 130 nets.
It is built around the STM32F429IGT6, USB3300-EZK and ADP5070ARE, with the ADP7182AUJ, LM1117-3.3 and TLP291-4 among its other parts. Its parts include 42 capacitors, 28 resistors, 9 ICs, 4 connectors and 2 diodes. It belongs with the STM32 boards of this library.
Main components
6STM32F429IGT6
LQFP-176(24x24)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 140 180MHz 1MB 256KB 32 Bit ARM Cortex-M4 Built-in FLASH LQFP-176(24x24) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)USB3300-EZK
QFN-32-EP(5x5)-40℃~+85℃ 3V~3.6V 54.7mA 83uA Controller USB 2.0 QFN-32-EP(5x5) USB Converters ROHSMicrochip TechnologyUSB ConvertersADP5070ARE
SSOP201A/0.6A, DC-to-DC Switching Regulator with Independent Positive and Negative OutputsAnalog DevicesUncategorisedADP7182AUJ
SOT23-5-1.22V to -27V, -200mA, Adjustable, Low Noise, Negative Linear RegulatorAnalog DevicesUncategorisedLM1117-3.3
SOT-2231 1.3V@(1000mA) 15V 1A 2mA 3.3V Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedTLP291-4
SOIC16Quad Channel Optocoupler, Phototransistor OutputToshibaUncategorised
README
README.mdstm32_ccd_camera
A STM32 CCD camera
Parts
92| Qty | Value | Footprint | References |
|---|---|---|---|
| 13 | 100nf | Capacitors_SMD:C_0603 | C1, C2, C21, C23, C24, C27, C29, C31, C32, C33, C34, C35, C36 |
| 7 | 1uf | Capacitors_SMD:C_0603 | C8, C9, C10, C11, C17, C18, C22 |
| 5 | 1k | Resistors_SMD:R_0603 | R16, R24, R25, R26, R27 |
| 5 | 2.2uf | Capacitors_SMD:C_0603 | C25, C26, C30, C40, C41 |
| 4 | 1M | Resistors_SMD:R_0603 | R10, R11, R21, R28 |
| 4 | 22p | Capacitors_SMD:C_0603 | C12, C13, C37, C38 |
| 3 | 47nf | Capacitors_SMD:C_0603 | C3, C5, C16 |
| 3 | R_Small | Resistors_SMD:R_0603 | R18, R19, R20 |
| 2 | 10K | Resistors_SMD:R_0603 | R1, R22 |
| 2 | 10uf | Capacitors_SMD:C_0603 | C14, C15 |
| 2 | 13k | Resistors_SMD:R_0603 | R15, R17 |
| 2 | 4.7nf | Capacitors_SMD:C_0603 | C20, C28 |
| 2 | 4.7uf | Capacitors_SMD:C_0603 | C6, C7 |
| 2 | ADP7142 | TO_SOT_Packages_SMD:SOT-23-5 | U5, U8 |
| 2 | CONN_01X16 | ccd:FPC_16 | P1, P2 |
| 2 | DFLS240/NSR0320MW2T1G | Diodes_SMD:SOD-323 | D1, D2 |
| 1 | 0.1uf | Capacitors_SMD:C_0603 | C39 |
| 1 | 100k | Resistors_SMD:R_0603 | R6 |
| 1 | 10k | Resistors_SMD:R_0603 | R13 |
| 1 | 10uf | Capacitors_SMD:C_1206 | C4 |
| 1 | 113K | Resistors_SMD:R_0603 | R9 |
| 1 | 12K | Resistors_SMD:R_0603 | R7 |
| 1 | 12k | Resistors_SMD:R_0603 | R3 |
| 1 | 147k | Resistors_SMD:R_0603 | R14 |
| 1 | 2.15M | Resistors_SMD:R_0603 | R5 |
| 1 | 2.1M | Resistors_SMD:R_0603 | R4 |
| 1 | 20k | Resistors_SMD:R_0603 | R12 |
| 1 | 24M | Crystals:Crystal_FOX-FE_SMD | Y1 |
| 1 | 3.3uH | mcu:Choke_SMD_3x3_H1.5 | L2 |
| 1 | 47n | Capacitors_SMD:C_0603 | C42 |
| 1 | 47uf | Capacitors_SMD:c_elec_4x5.3 | C19 |
| 1 | 5.6K | Resistors_SMD:R_0603 | R2 |
| 1 | 510 | Resistors_SMD:R_0603 | R23 |
| 1 | 6.8uH | mcu:Choke_SMD_3x3_H1.5 | L1 |
| 1 | 820 | Resistors_SMD:R_0603 | R8 |
| 1 | 8M | Crystals:Crystal_FOX-FE_SMD | Y2 |
| 1 | ADP5070 | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | U3 |
| 1 | ADP7182 | TO_SOT_Packages_SMD:SOT-23-5 | U6 |
| 1 | BOOT | mcu:TP_SMD | W1 |
| 1 | IS64WV102416 | mcu:TSSOP_48_12X20mm_Pitch0.5mm | U1 |
| 1 | LM1117-3.3 | TO_SOT_Packages_SMD:SOT-223 | U7 |
| 1 | RJ12 | eqmax:RJ12_EQMAX | J1 |
| 1 | RXD | mcu:TP_SMD | W3 |
| 1 | TLP291-4 | Housings_SOIC:SOIC-16_7.5x10.3mm_Pitch1.27mm | U9 |
| 1 | TXD | mcu:TP_SMD | W2 |
| 1 | USB3300 | Housings_DFN_QFN:QFN-32-1EP_5x5mm_Pitch0.5mm | U4 |
| 1 | USB_B | Connect:USB_B | P3 |
| 1 | stm32f429igt6 | Housings_QFP:LQFP-176_20x20mm_Pitch0.4mm | U2 |
Similar boards
- 2 layers204 × 174.9 mm

- 2 layers85 × 85 mm

- 6 layers186 × 160 mm

Open TWIST rev0
louisreg/Open-TWIST
An open-source and open-hardware benchtop neurostimulator offering precise, programmable, and arbitrary waveform generation for neuroscience research.
824 parts - 2 layers49.5 × 49.5 mm

- 6 layers56 × 65 mm

Mainboard gen2
zephray/NekoInk
Next gen. of NekoCal: An open-source hackable and programmable e-paper display
245 parts108 - 4 layers88 × 23.4 mm

- 4 layers98.7 × 77.3 mm

Akeypad
luantty2/akeypad
8khz polling rate keypad, uses STM32F405 and USB3300, powered by QMK.
69 parts13GPL-3.0 - 4 layers45 × 75 mm

Questions
What parts does the Mcu use?
92 parts, built around the STM32F429IGT6, USB3300-EZK, ADP5070ARE and ADP7182AUJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mcu KiCad files?
From the trlsmax/stm32_ccd_camera repository on GitHub, at the commit this page was made from: the board is hw/mcu/mcu.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mcu design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).