
ADP5070ARE
Analog Devices
1A/0.6A, DC-to-DC Switching Regulator with Independent Positive and Negative Outputs
- Part id
- adi/ADP5070ARE
- Category
- Uncategorised
- Package
- SSOP20
- Pins
- 20
- Used on
- 2 open-source boards
Overview
The ADP5070ARE is an uncategorised made by Analog Devices in a SSOP20 package with 20 pins. 1A/0.6A, DC-to-DC Switching Regulator with Independent Positive and Negative Outputs.
PCBKit's library has its KiCad symbol (Regulators:ADP5070AREZ, from CERN's library) and its footprint (Package_SO:SSOP-20_5.3x7.2mm_P0.65mm, from KiCad's library), ready for a KiCad board. 2 open-source boards in 2 repositories on GitHub use it.
Symbol
Footprint
Pinout
20| Pin | Name | Type |
|---|---|---|
| 1 | PGND | Power in |
| 2 | SW1 | Output |
| 3 | INBK | Output |
| 4 | SYNC/FREQ | Input |
| 5 | SEQ | Input |
| 6 | SLEW | Input |
| 7 | FB1 | Input |
| 8 | COMP1 | Input |
| 9 | EN1 | Input |
| 10 | SS | Input |
| 11 | EN2 | Input |
| 12 | COMP2 | Input |
| 13 | FB2 | Input |
| 14 | VREF | Output |
| 15 | AGND | Power in |
| 16 | VREG | Output |
| 17 | PVIN1 | Power in |
| 18 | PVINSYSS | Power in |
| 19 | PVIN2 | Power in |
| 20 | SW2 | Output |
Open-source boards using it
2- 2 layers

- 6 layers186 × 160 mm

Open TWIST rev0
louisreg/Open-TWIST
An open-source and open-hardware benchtop neurostimulator offering precise, programmable, and arbitrary waveform generation for neuroscience research.
824 parts
Parts like it
8GXC400U
SSOP-20LSSOP-20L Analog to Digital Converters (ADC) ROHSGXCASUncategorisedADS8344NB
SSOP-20-208mil-40℃~+85℃ 1.2mA、1.5mA 100kHz 16 2.4MHz 2.7V~5V 6LSB、8LSB 8 86dB External External、Built-in Multiplexers SAR Serial port Yes SSOP-20-208mil Analog to Digital Converters (ADC) ROHSTexas InstrumentsUncategorisedADCMP562BRQ
SSOP20Dual High Speed PECL ComparatorsAnalog DevicesUncategorisedADN4650BRS
SSOP203.75kV RMS, 600Mbps, Dual-Channel LVDS IsolatorsAnalog DevicesUncategorisedADN4651BRS
SSOP203.75kV RMS, 600Mbps, Dual-Channel LVDS IsolatorsAnalog DevicesUncategorisedLTC1562CG-2
SSOP20Very Low Noise, Low Distortion, Active RC Quad Universal Filter, 0°C to 70°CAnalog DevicesUncategorisedADX518ASOP20
SSOP-20SSOP-20 Analog to Digital Converters (ADC) ROHSanalogysemiUncategorisedMAX3160CAP
SSOP20+3.0V to +5.5V, 1µA, RS-232/RS-485/422 Multiprotocol TransceiversMaxim Integrated (Analog Devices)Uncategorised
Questions
Is there a KiCad symbol and footprint for the ADP5070ARE?
Yes. The symbol is Regulators:ADP5070AREZ and the footprint Package_SO:SSOP-20_5.3x7.2mm_P0.65mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ADP5070ARE?
SSOP20, with 20 pins. Its footprint is drawn on this page.
What can replace the ADP5070ARE?
Parts like it in the library: the GXC400U by GXCAS, the ADS8344NB by Texas Instruments, the ADCMP562BRQ by Analog Devices and the ADN4650BRS by Analog Devices. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ADP5070ARE?
2 boards in 2 repositories on GitHub; the most starred are listed on this page, with their KiCad files.