2 layers89.5 × 62.2 mm
Module di
andreili/STM32-PLC
The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
122 parts69GPL-3.0
2 layers89.5 × 62.2 mm
Module do
andreili/STM32-PLC69The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
- Size
- 89.5 × 62.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 139
- Nets
- 124
- Pads
- 436
- Tracks, vias
- 738, 107
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 19 Jul 2017
- Updated
- 5 Jan 2018
Overview
Module do is an open-source printed circuit board by andreili, from the andreili/STM32-PLC repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 89.5 × 62.2 mm with 139 parts on 124 nets, routed with 738 tracks and 107 vias.
It is built around the TLP291-4 and IRLML5103. Its parts include 52 resistors, 50 diodes, 16 transistors, 6 connectors and 5 ICs. It belongs with the STM32 boards of this library.
Main components
2Parts
139| Qty | Value | Footprint | References |
|---|---|---|---|
| 34 | 10k | Resistors_SMD:R_0805 | R1, R3, R10, R12, R13, R15, R16, R18, R19, R21, R22, R24, R25, R27, R28, R30 +18 |
| 18 | 1k | Resistors_SMD:R_0805 | R2, R5, R11, R14, R17, R20, R23, R26, R29, R32, R35, R38, R41, R44, R47, R50 +2 |
| 16 | 1N4001 | Diodes_SMD:D_SOD-123 | D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48 |
| 16 | DO_I | LEDs:LED_0603 | D1, D3, D5, D7, D9, D11, D13, D15, D17, D19, D21, D23, D25, D27, D29, D31 |
| 16 | DO_O | LEDs:LED_0603 | D2, D4, D6, D8, D10, D12, D14, D16, D18, D20, D22, D24, D26, D28, D30, D32 |
| 16 | IRLML5103 | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 4 | TLP291-4 | SMD_Packages:SO-16-N | U2, U3, U4, U5 |
| 3 | 100n | Capacitors_SMD:C_0805 | C1, C2, C4 |
| 1 | 4,7u 10v | Capacitors_Tantalum_SMD:CP_Tantalum_Case-A_EIA-3216-18_Wave | C3 |
| 1 | BOOT0 | Connect:GS2 | J4 |
| 1 | DEBUG | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.00mm | P3 |
| 1 | DO_0 | Connectors_Phoenix:PhoenixContact_MC-G_10x3.81mm_Angled | J1 |
| 1 | DO_1 | Connectors_Phoenix:PhoenixContact_MC-G_10x3.81mm_Angled | J2 |
| 1 | MOD | Projects:Pin_Header_2.00mm_SMD | J3 |
| 1 | SFL | LEDs:LED_0603 | D50 |
| 1 | SOK | LEDs:LED_0603 | D49 |
| 1 | STM32F103C8Tx | Housings_QFP:LQFP-48_7x7mm_Pitch0.5mm | U1 |
| 1 | UART1 | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.00mm | J5 |
The 133 most common of 139 parts.
More from andreili/STM32-PLC
4- 2 layers
Hw cpu
andreili/STM32-PLC
The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
104 parts69GPL-3.0 - 2 layers87 × 95.9 mm
Cross
andreili/STM32-PLC
The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
54 parts69GPL-3.0 - 2 layers90.2 × 97.8 mm
Mod cross
andreili/STM32-PLC
The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.
40 parts69GPL-3.0
Similar boards
- 4 layers90.2 × 95.9 mm
- 2 layers67.5 × 21.5 mm
- 2 layers
- 2 layers
- 2 layers65 × 56.5 mm
Doorbot
makeitlabs/doorbot
Doorbot is an RFID access control platform, primarily intended for exterior doors in a makerspace environment. Based on Raspberry Pi 3b+, PoE hat, and a custom interface hat.
82 parts2 - 2 layers98.1 × 98 mm
- 4 layers99.6 × 64.2 mm
- 2 layers42.9 × 70.5 mm
Lightningtrigger
kanestoboi/lightningtrigger
A lightning detection tool for high-speed DSLR photography
72 parts1
Questions
How big is the Module do PCB?
It measures 89.5 × 62.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Module do use?
139 parts, built around the TLP291-4 and IRLML5103. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Module do KiCad files?
From the andreili/STM32-PLC repository on GitHub, at the commit this page was made from: the board is hardware/hw_do16/module_do.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Module do design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).