Skip to the content
2 layers87 × 95.9 mmCross, the printed circuit board in 3D

The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.

Size
87 × 95.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
54
Nets
11
Pads
396
Tracks, vias
558, 63
Pours
18
Routed
Yes
KiCad
KiCad 4
Created
19 Jul 2017
Updated
5 Jan 2018

Overview

Cross is an open-source printed circuit board by andreili, from the andreili/STM32-PLC repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 87 × 95.9 mm with 54 parts on 11 nets, routed with 558 tracks and 63 vias.

It is built around the 74LS125DC. Its parts include 18 connectors and 9 ICs.

Main components

1

Parts

54
QtyValueFootprintReferences
974LS125Housings_SOIC:SOIC-14_3.9x8.7mm_Pitch1.27mmU1, U1, U1, U1, U1, U1, U1, U1, U1
9LOGOw_logo:Logo_silk_OSHW_12x13mmG***, G***, G***, G***, G***, G***, G***, G***, G***
9MOD_INPin_Headers:Pin_Header_Straight_1x14_Pitch2.00mmJ1, J1, J1, J1, J1, J1, J1, J1, J1
9MOD_OUTPin_Headers:Pin_Header_Straight_1x14_Pitch2.00mmJ2, J2, J2, J2, J2, J2, J2, J2, J2

The 36 most common of 54 parts.

More from andreili/STM32-PLC

4
  • 2 layers89.5 × 62.2 mmModule do, the printed circuit board in 3D

    Module do

    andreili/STM32-PLC

    The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.

    139 parts69GPL-3.0
  • 2 layers89.5 × 62.2 mmModule di, the printed circuit board in 3D

    Module di

    andreili/STM32-PLC

    The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.

    122 parts69GPL-3.0
  • 2 layersHw cpu, the printed circuit board in 3D

    Hw cpu

    andreili/STM32-PLC

    The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.

    104 parts69GPL-3.0
  • 2 layers90.2 × 97.8 mmMod cross, the printed circuit board in 3D

    Mod cross

    andreili/STM32-PLC

    The project is open source and open hardware, the purpose of which is to create a PLC based on STM32 MCU's.

    40 parts69GPL-3.0

Similar boards

  • 2 layers231.1 × 106.7 mmSnark barker, the printed circuit board in 3D

    Snark barker

    schlae/snark-barker

    A 100% compatible replica of the famed SB 1.0 sound card

    199 parts687
  • 2 layers98 × 38 mmBldc control ver3, the printed circuit board in 3D

    Bldc control ver3

    pekkaroi/bldc-drive

    Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller

    68 parts199GPL-2.0
  • 2 layers40 × 100 mmBack pcb, the printed circuit board in 3D

    Back pcb

    ZeroPhone/ZeroPhone-PCBs

    PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!

    118 parts148GPL-3.0
  • 2 layers128.3 × 50.8 mmCD32 Controller, the printed circuit board in 3D

    CD32 Controller

    BleuLlama/AmigaSchematics

    Schematics of various Commodore Amiga related items

    33 parts58MIT
  • 4 layers337.6 × 105.7 mmISA CGA, the printed circuit board in 3D

    ISA CGA

    hkzlab/CGA_Redux

    The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics

    170 parts56
  • 2 layers170.2 × 100 mmZ80-SBC, the printed circuit board in 3D

    Z80-SBC

    skiselev/zeta_sbc

    Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware

    75 parts53GPL-3.0
  • 2 layers68.6 × 53.3 mmFdshield, the printed circuit board in 3D

    Fdshield

    yas-sim/floppy_disk_shield_2d

    This is a project to retain 2D/2DD floppy disk data as a raw bit-stream data. The project includes both HW and SW.

    30 parts49Apache-2.0
  • 4 layers231.1 × 340.4 mmSun3 60 layout2 routing2, the printed circuit board in 3D

    Sun3 60 layout2 routing2

    54weasels/sun3_60

    Notes on each section: - CPU - 68030 support left out entirely - 68881 in the schematics but left out of the PCB - MMU - U2001 which would be needed to support any video, either P4 or built-in not in the PCB - U314…

    225 parts35

Questions

How big is the Cross PCB?

It measures 87 × 95.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Cross use?

54 parts, built around the 74LS125DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Cross KiCad files?

From the andreili/STM32-PLC repository on GitHub, at the commit this page was made from: the board is hardware/hw_cross/cross.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Cross design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).