
AquariumSensor
mitchins/ESP-Aquarium-Water-Sensor
A simple water flow and quality sensor for aquariums based on ESP controller

S³-MK1 ( S Cube MK-1) : A Surveillance and Security System.
S3-MK1 is an open-source printed circuit board by ambariz, from the ambariz/S3-MK1 repository on GitHub. It is a 2-layer board of 172.5 × 66 mm with 27 parts on 51 nets, routed with 175 tracks and 0 vias.
It is built around the WEMOS D1 MINI and DHT11. Its parts include 6 switches, 4 connectors, 3 ICs, 2 resistors and 2 diodes. It belongs with the ESP8266 boards of this library.
A compact Surveillance Security System built around a sensor-equipped cube and a wearable controller.
The S3 Cube monitors its surroundings using multiple sensors for motion, vibration, orientation, light, temperature, humidity, and sound. The data is sent to the S3 Watch, a small wearable controller with an OLED display and physical buttons for monitoring and controlling the cube.
The project includes custom PCBs designed in KiCad, custom component footprints, ESP8266 firmware, and fully 3D-printed enclosures designed in Onshape.
| S3 MK-1 Cube | S3 MK-1 Watch |
|---|---|
![]() | ![]() |
Note: S3 Cube MK-1 enclosure is made for rolling in a plain surface. This's the reason the edges are with R10.
| S3 Cube MK-1 | S3 Watch MK-1 |
|---|---|
![]() | ![]() |
![]() | ![]() |
Note:
The S3 Watch PCB is designed with a 20mm strap support, If you are 3D printing the enclosure for the watch, Feel free to break it with pliers.
| S3 MK-1 Cube PCB | S3 MK-1 Watch PCB |
|---|---|
![]() | ![]() |
![]() | ![]() |
Note:
The preview images may be scaled down and lose detail. Use the journal.md for a clear, full-resolution view.
| S3 MK-1 Cube | S3 MK-1 Watch |
|---|---|
![]() | ![]() |
| Product | Quantity | Source | Price (INR) | Link |
|---|---|---|---|---|
| D1 Mini ESP8266 | 2 | Robu | 199 | Product Link |
| mmWave Sensor HLK-LD2410-AA | 1 | Robu | 639 | Product Link |
| SW-420 Vibration Sensor Module | 1 | Robu | 42 | Product Link |
| MPU-6050 3-Axis Accelerometer and Gyro Sensor | 1 | Robu | 154 | Product Link |
| LDR 5mm | 1 | Robu | 59 | Product Link |
| DHT11 | 1 | Robu | 51 | Product Link |
| LiPo Battery | 2 | Robu | 219 | Product Link |
| Slide Switch | 2 | Robu | 2 | Product Link |
| Neopixel 5050 | 2 | Robu | 176 | Product Link |
| Buzzer | 2 | Robu | 47 | Product Link |
| Tactile Push Button Switch | 4 | Robu | 1.26 | Product Link |
| ERM Coin Vibration Motor | 1 | Robu | 77 | Product Link |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | SW_Push | Button_Switch_THT:SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW3, SW4, SW5, SW6 |
| 2 | Battery_Cell | custom_footprints_1:Battery_LiPo_Custom | BT1, BT2 |
| 2 | NeoPixel_THT | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1, D2 |
| 2 | SW_Slide_DPDT | Button_Switch_THT:SW_CK_JS202011CQN_DPDT_Straight | SW1, SW2 |
| 2 | WEMOS_D1_mini | RF_Module:WEMOS_D1_mini_light | U1, U3 |
| 1 | Buzzer | Buzzer_Beeper:MagneticBuzzer_Kingstate_KCG0601 | BZ2 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm | BZ1 |
| 1 | DHT11 | Sensor:Aosong_DHT11_5.5x12.0_P2.54mm | U2 |
| 1 | Haptic_Vibration | Buzzer_Beeper:MagneticBuzzer_Kingstate_KCG0601 | BZ3 |
| 1 | LDR07 | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | R1 |
| 1 | MPU6050_Module | custom_footprints_1:MPU6050_Module | A1 |
| 1 | OLED_128x64 | ScottoKeebs_Scotto:OLED_128x64 | J5 |
| 1 | R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R2 |
| 1 | SW_420 | custom_footprints_1:Vibration_sensor_SW420_custom | J2 |
| 1 | audio_sensor_custom | custom_footprints_1:Audio_sensor_custom | J3 |
| 1 | ~ | custom_footprints_1:LD2420_custom | J1 |
The 23 most common of 27 parts.

mitchins/ESP-Aquarium-Water-Sensor
A simple water flow and quality sensor for aquariums based on ESP controller

jnissen/CC101
ESP MCU with CC1101 868 MHz Wireless Funk Modul Transciever


vineethjkatti-tech/iplanter
iplanter is a smart planter which uses moisture and temperature sensor to display the health of the plant on an OLED display.

rwlloyd/stupid-solar-thing
Solar powered Wifi Sensor Based on ESP8266 microcontroller

nkitanov/iaq_board
IAQ Board is a DIY (Do-It-Yourself) device for measuring internal air quality

bitfixer/bf-romulator
Romulator - RAM/ROM replacement and debug for 6502 CPU systems

alcar21/WemosEM
Cheap power monitor (STC013) with Home Assistant Discover and Wemos D1 Mini / PRO (esp8266)
It measures 172.5 × 66 mm and has 2 copper layers, 1.6 mm thick.
27 parts, built around the WEMOS D1 MINI and DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ambariz/S3-MK1 repository on GitHub, at the commit this page was made from: the board is pcb/S3-MK1.kicad_pcb and its schematic pcb/S3-MK1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask ambariz before reusing the design.