

Hat-01
Addy's Railroad Company
- Size
- 65 × 56.5 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 43
- Pads
- 294
- Tracks, vias
- 456, 137
- Pours
- 11
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 27 Sep 2026
- Updated
- 29 Sep 2026
Overview
Hat-01 is an open-source printed circuit board by alxhub, from the alxhub/arc repository on GitHub. It is a 4-layer board of 65 × 56.5 mm with 69 parts on 43 nets, routed with 456 tracks and 137 vias.
It is built around the ISO1044BD, ISO1430DW and R-78E5.0-0.5, with the TPSM53603RDAR, AP2112K-3.3 and FODM217A among its other parts. Its parts include 19 capacitors, 17 resistors, 3 ICs, 2 diodes and 1 transistor.
Main components
12ISO1044BD
SOIC-8-40℃~+125℃ 1.71V~1.89V、2.25V~5.5V、4.5V~5.5V 5Mbps 70mA CAN FD Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversISO1430DW
SOIC-16-300mil-40℃~+125℃ 12Mbps SOIC-16-300mil Isolated RS-485/422 Transceivers ROHSTexas InstrumentsIsolated RS-485/422 TransceiversR-78E5.0-0.5
SIP,11.5x7.6mm-300mA、500mA -5V、5V 1 330uF、680uF 6.5V~36V、7V~31V 81%、90% Buck Short Circuit Protection SIP,11.5x7.6mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesTPSM53603RDAR
B3QFN-15(5x5.5)-40℃~+105℃@(TA) 1 1.4MHz 1V~7V 24uA 3.8V~36V 3A Adjustable Buck Buck Built-in B3QFN-15(5x5.5) DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersAP2112K-3.3
SOT253.3V 600mA CMOS Low Dropout Linear Regulator with EnableDiodes IncorporatedUncategorisedFODM217A
SOP-4-1.27mm-55℃~+110℃ 1 1.2V 160% 3.75kV 3us 3us 400mV@8mA,8mA 50mA 50mA 80% 80V 9V DC Phototransistor SOP-4-1.27mm Transistor, Photovoltaic Output Optoisolators ROHSonsemiTransistor, Photovoltaic Output OptoisolatorsRJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorisedBSC030N08NS5
TDSON-8(5x6)-55℃~+150℃ 1 N-channel 100A 139W 3.8V 3mΩ@10V 5.6nF 56pF 76nC@10V 80V TDSON-8(5x6) MOSFETs ROHSInfineon TechnologiesMOSFETsBUK9M53-60EX
LFPAK33-8-55℃~+175℃ 1 N-channel 17A 2.1V 2.4nC@5V 36W 47pF 53mΩ@5V 60V 683pF 73pF N-Channel LFPAK33-8 MOSFETs ROHSNexperiaMOSFETsCAT24C256LI
PDIP-81,000,000 cycles 1.8V~5.5V 100 Years 256Kbit 400kHz 5ms Hardware write protection function、Noise suppression function、Built-in power-on reset (POR) I2C PDIP-8 EEPROM ROHSonsemiEEPROMSMBJ26A
DO-214AA(SMB)-65℃~+150℃ 14.3A 1uA 26V 31.9V 42.1V 600W@10/1000us TVS Unidirectional DO-214AA(SMB) ESD and Surge Protection (TVS/ESD) ROHSMDDESD And Surge Protection (TVS/ESD)SS16
SMA(DO-214AC)-55℃~+150℃ 100uA@60V 1A 60V 700mV@1A Independent SMA(DO-214AC) Schottky Diodes ROHSFUXINSEMISchottky Diodes
README
trackside/trk-tbl-01xK/README.mdARC-TRK-TBL-01xK
ARC-TRK-TBL-01xK is the trackside controller for a Kato turntable. It connects to an ARC track hub over a LIN cable, moves the bridge, operates its lock, and counts the turntable's index contact as the bridge passes each stop. A homing sensor port can establish an absolute starting position.
The rails on the moving bridge receive power from a separate ARC district. This board passes that pair to the Kato cable and reports whether the feed is active. The controller does not drive the track rails.
An expansion port can host a nearby angle sensor or other I²C accessory.
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | C_0402_1005Metric | C1, C11, C12, C15, C16, C18, C19 |
| 4 | 10kΩ | R_0402_1005Metric | R1, R4, R11, R15 |
| 4 | TestPoint | TestPoint_Pad_D1.5mm | CAN_RX, CAN_TX, DCC_RX, LNK+ |
| 3 | 100kΩ | R_0402_1005Metric | R6, R13, R17 |
| 3 | 10µF | C_1210_3225Metric | C3, C4, C13 |
| 3 | 4.7kΩ | R_0402_1005Metric | R2, R3, R9 |
| 3 | Fiducial | Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 2 | 1µF | C_0402_1005Metric | C8, C9 |
| 2 | 4.7µF | C_1210_3225Metric | C14, C17 |
| 2 | 47µF | C_1210_3225Metric | C5, C6 |
| 2 | Conn_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | 24V, CONTACTOR |
| 2 | FODM217A | SOP-4_4.4x2.6mm_P1.27mm | CTRL_GOOD, U4 |
| 2 | RJ45 | RJ45_Amphenol_54602-x08_Horizontal | LNK1, LNK2 |
| 2 | green | LED_0805_2012Metric | 3V3, LNK |
| 1 | 100Ω | R_0402_1005Metric | R14 |
| 1 | 10nF | C_0402_1005Metric | C7 |
| 1 | 10µF | CP_Elec_5x5.8 | C10 |
| 1 | 15µH | L_Bourns-SRN4018 | L1 |
| 1 | 2.44kΩ | R_0402_1005Metric | R5 |
| 1 | 2kΩ | R_0402_1005Metric | R12 |
| 1 | 300Ω | R_0805_2012Metric | R10 |
| 1 | 4.3kΩ | R_1206_3216Metric | R16 |
| 1 | 40MHz | Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm | Y1 |
| 1 | 47µF | CP_Elec_6.3x7.7 | C2 |
| 1 | 6.92kΩ | R_0402_1005Metric | R7 |
| 1 | 680Ω | R_0402_1005Metric | R8 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | BSC030N08NS5 | TDSON-8-1 | Q1 |
| 1 | BUK9M53-60EX | LFPAK33 | CTRL |
| 1 | CAT24C256 | SOIC-8_3.9x4.9mm_P1.27mm | ID |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | PROG |
| 1 | Conn_01x04_MountingPin | JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal | I2C |
| 1 | ISO1044BD | SOIC-8_3.9x4.9mm_P1.27mm | CAN |
| 1 | ISO1430DW | SOIC-16W_7.5x10.3mm_P1.27mm | DCC_SYNC |
| 1 | LTC4359-DCB | DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm | U2 |
| 1 | MCP2518FD-xQBB | DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm | XCAN |
| 1 | R-78E5.0-0.5 | Converter_DCDC_RECOM_R-78E-0.5_THT | LNK_BUCK |
| 1 | RPi_GPIO | RPI_Hat_B+ | PI |
| 1 | SMBJ26A | D_SMB | D1 |
| 1 | SS16 | D_SMA | D2 |
| 1 | TPSM53603RDA | Texas_B3QFN-14-1EP_5x5.5mm_P0.65mm | U1 |
| 1 | TestPoint | TestPoint_Loop_D2.50mm_Drill1.0mm | LNK- |
More from alxhub/arc
12- 4 layers90 × 70 mm

- 4 layers90 × 70 mm

- 4 layers90 × 70 mm

- 4 layers90 × 70 mm

- 4 layers90 × 70 mm

- 4 layers90 × 70 mm

- 2 layers50 × 50 mm

- 4 layers70 × 50 mm

- 4 layers50 × 50 mm

- 4 layers50 × 50 mm

- 2 layers50 × 50 mm

- 2 layers99 × 54.9 mm

Similar boards
- 4 layers60 × 45 mm

- 4 layers123 × 86.5 mm

- 2 layers77.5 × 63.5 mm

Power Board 6
ButterCaptain/Multi-Rail-Power-Distribution-Board
A flexible power distribution board featuring three cascading buck converter stages for rapid prototyping and R&D testing.
68 parts - 4 layers200 × 50 mm

- 4 layers44.6 × 67.2 mm

Multirail PDB
Roshan-khatri78/Electronics-Projects-KiCad-
A collection of my KiCad projects and PCB designs. These projects reflect my learning journey in electronics and PCB design.
73 parts2 - 2 layers60 × 70 mm

- 2 layers100 × 100 mm

- 4 layers77 × 30 mm

Questions
How big is the Hat-01 PCB?
It measures 65 × 56.5 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Hat-01 use?
69 parts, built around the ISO1044BD, ISO1430DW, R-78E5.0-0.5 and TPSM53603RDAR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hat-01 KiCad files?
From the alxhub/arc repository on GitHub, at the commit this page was made from: the board is backbone/hat-01/hat-01.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hat-01 design in my own project?
Its repository states no licence, so its author keeps all rights: ask alxhub before reusing the design.