4 layers92.5 × 101.6 mm
ISO1044BD
Texas InstrumentsExtended
-40℃~+125℃ 1.71V~1.89V、2.25V~5.5V、4.5V~5.5V 5Mbps 70mA CAN FD Transceiver SOIC-8 CAN Transceivers ROHS
- Part id
- ti/ISO1044BD
- Category
- CAN Transceivers
- Package
- SOIC-8
- Pins
- 8
- In stock
- 6,244 at JLCPCB (C2878225)
- Used on
- 34 open-source boards
Overview
The ISO1044BD is a CAN Transceiver made by Texas Instruments in a SOIC-8 package with 8 pins. -40℃~+125℃ 1.71V~1.89V、2.25V~5.5V、4.5V~5.5V 5Mbps 70mA CAN FD Transceiver SOIC-8 CAN Transceivers ROHS.
PCBKit's library has its KiCad symbol (Interface_CAN_LIN:ISO1044BD, from KiCad's library) and its footprint (Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, from KiCad's library), ready for a KiCad board. 6,244 are in stock at JLCPCB (part C2878225). 34 open-source boards in 17 repositories on GitHub use it.
Symbol
Footprint
Pinout
8| Pin | Name | Type |
|---|---|---|
| 1 | VCC1 | Power in |
| 2 | TXD | Input |
| 3 | RXD | Output |
| 4 | GND1 | Power in |
| 5 | CANL | Input/output |
| 6 | CANH | Input/output |
| 7 | GND2 | Power in |
| 8 | VCC2 | Power in |
- 4 layers280 × 200 mm
Main Control Unit
Tuskar-Marine/hardware
All tools for the Mermaid's Rest open sailing tools
409 parts6 - 2 layers319.7 × 58.4 mm
- 4 layers199.8 × 150 mm
- 4 layers70 × 115 mm
Bms carrier shield
gabrielfbdiniz/BMS-Master-STM32-Nucleo-G474RE
Repositório oficial e unificado (Monorepo) de Hardware, Firmware e Documentação de Engenharia do BMS Master desenvolvido para o protótipo Formula SAE Electric da equipe Formula ITA (Temporada 2025-2026).
73 parts1 - 6 layers34 × 56 mm
- 4 layers90 × 70 mm
- 2 layers81.7 × 61.8 mm
Parts like it
8
TJA1051T/3/1J
SOIC-8-150mil-40℃~+150℃ 110mA 4.5V~5.5V 5Mbps CAN FD Transceiver SOIC-8-150mil CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversSN65HVD230D
SOIC-8-40℃~+85℃ 1 17mA 1Mbps 370uA 3V~3.6V CAN Transceiver Low-power mode、Wake-up function、ESD protection、Thermal shutdown protection、Bus fault protection、Hot-swap protection SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversTJA1042T/1J
SOIC-8-40℃~+150℃ 15uA 4.5V~5.5V 5Mbps 70mA CAN FD Transceiver SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversCA-IF1051S
SOIC-8-55℃~+150℃ 2Mbps 4.5V~5.5V 80mA CAN Transceiver SOIC-8 CAN Transceivers ROHSChipanalogCAN TransceiversTJA1042T/3/1J
SOIC-8-40℃~+150℃ 15uA 4.5V~5.5V 5Mbps 70mA SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversTJA1044T/1Z
SOIC-8-40℃~+150℃ 15uA 1Mbit/s 4.5V~5.5V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHSNXP SemiconductorsCAN TransceiversSIT1050T
SO-8-40℃~+125℃ 1 10mA 1Mbps 4.5V~5.5V 70mA CAN Transceiver TXD dominant timeout、Thermal shutdown protection、Short-Circuit Protection、Silent mode SO-8 CAN Transceivers ROHSSITCAN TransceiversSN65HVD232D
SOIC-8-40℃~+85℃ 17mA 1Mbps 3.3V CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
Questions
Is there a KiCad symbol and footprint for the ISO1044BD?
Yes. The symbol is Interface_CAN_LIN:ISO1044BD and the footprint Package_SO:SOIC-8_3.9x4.9mm_P1.27mm, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the ISO1044BD?
SOIC-8, with 8 pins. Its footprint is drawn on this page.
Where is the ISO1044BD datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the ISO1044BD?
JLCPCB lists it as part C2878225, with 6,244 in stock; the sellers' links on this page open their listings.
What can replace the ISO1044BD?
Parts like it in the library: the TJA1051T/3/1J by NXP Semiconductors, the SN65HVD230D by Texas Instruments, the TJA1042T/1J by NXP Semiconductors and the CA-IF1051S by Chipanalog. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the ISO1044BD?
34 boards in 17 repositories on GitHub; the most starred are listed on this page, with their KiCad files.