4 layers42.8 × 36.8 mm
2 layers22.9 × 50.8 mm
Usb sensor module
AlnisS/phys-427Projects for Phys 427: Creative Electronics
- Size
- 22.9 × 50.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 24
- Nets
- 47
- Pads
- 94
- Tracks, vias
- 90, 4
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Jan 2024
- Updated
- 26 Apr 2024
Overview
Usb sensor module is an open-source printed circuit board by AlnisS, from the AlnisS/phys-427 repository on GitHub. It is a 2-layer board of 22.9 × 50.8 mm with 24 parts on 47 nets, routed with 90 tracks and 4 vias.
It is built around the TLV61046ADBV and 0ZRE0005FF1C. Its parts include 10 resistors, 2 capacitors, 2 diodes, 2 connectors and 1 IC. It belongs with the sensors and measurement boards of this library.
Main components
2
TLV61046ADBV
SOT-23-6-40℃~+125℃@(TJ) 1 1.05MHz 1.8V~5.5V 110uA 3.3V~28V Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode、Load disconnect SOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters0ZRE0005FF1C
插件-40℃~+85℃ 1.5A 120mA 15s 18.5Ω 240V 50mA 65Ω 700mW 插件 Resettable Fuses ROHSBel FuseResettable Fuses
Parts
24| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4 |
| 2 | 1N5817 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2 |
| 2 | 348 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R8, R9 |
| 2 | 49.9 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R7, R10 |
| 1 | 0ZRE0005FF1C | 0ZRE0005FF1C:0ZRE0005FF1C | F1 |
| 1 | 10uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C2 |
| 1 | 12uH | Inductor_THT:L_Radial_D7.0mm_P3.00mm | L1 |
| 1 | 2.0M | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R5 |
| 1 | 218-504/000-604 | ul_218-504-000-604_footprint:ul_218-504-000-604 | J2 |
| 1 | 218-508 | ul_218-508_footprint:ul_218-508 | J1 |
| 1 | 4.7uF | Capacitor_THT:C_Radial_D5.0mm_H11.0mm_P2.00mm | C1 |
| 1 | 68k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R6 |
| 1 | Adafruit_Feather_Generic | Module:Adafruit_Feather | A1 |
| 1 | TLV61046ADB | Package_TO_SOT_SMD:SOT-23-6 | U1 |
The 20 most common of 24 parts.
Questions
How big is the Usb sensor module PCB?
It measures 22.9 × 50.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Usb sensor module use?
24 parts, built around the TLV61046ADBV and 0ZRE0005FF1C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Usb sensor module KiCad files?
From the AlnisS/phys-427 repository on GitHub, at the commit this page was made from: the board is ecad/usb_sensor_module/usb_sensor_module.kicad_pcb and its schematic ecad/rocket_controls/rocket_controls.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Usb sensor module design in my own project?
Its repository states no licence, so its author keeps all rights: ask AlnisS before reusing the design.
Similar boards
- 2 layers75.9 × 50.1 mm
Suspension telemetry
porast1/suspension-telemetry
Suspension telemetry system for mountain bike or dirt bike
77 parts14MIT - 4 layers80.1 × 78.6 mm
Gb fpga
blazer82/gb.fpga
FPGA-based handheld console that plays games from Gameboy cartridges
151 parts12 - 4 layers28.6 × 80.6 mm
PmodADC
schilkp/PmodADC
A fully discrete 14bit, 41kHz, FPGA-controlled Successive-Approximation Audio ADC and R2R Audio DAC.
137 parts6MIT - 2 layers37 × 70.9 mm
Opendiag
maximus64/opendiag-hardware
OpenDIAG - Open Source OBD2 Interface (Hardware)
148 parts5CERN-OHL-S-2.0 - 2 layers66 × 65 mm
- 4 layers100 × 100 mm
Payload board
inspireFly-VT/ContentCube_Payload_Board
The payload board for inspireFly's ContentCube satellite.
98 parts2 - 2 layers100 × 46 mm
