4 layers80 × 104.1 mm
2 layers100 × 46 mm
Serial logger prototype
JitterCompany/uartwise2SerialLogger Hardware
- Size
- 100 × 46 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 44
- Pads
- 241
- Tracks, vias
- 558, 79
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Jan 2020
- Updated
- 7 Aug 2020
Overview
Serial logger prototype is an open-source printed circuit board by JitterCompany, from the JitterCompany/uartwise repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 46 mm with 74 parts on 44 nets, routed with 558 tracks and 79 vias.
It is built around the STM32G070KBT6, SN74LV1T34DBV and 74LVC3G17DP, with the TLV61046ADBV and ELW2106AA among its other parts. Its parts include 20 capacitors, 14 resistors, 6 ICs, 4 connectors and 2 switches. It belongs with the interfaces and adapters boards and the STM32 boards of this library.
Main components
5
STM32G070KBT6
LQFP-32(7x7)-40℃~+85℃ 128KB 12bit 29 2V~3.6V 32 Bit 36KB 64MHz ARM Cortex-M0+ Built-in+External FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SN74LV1T34DBV
SOT-23-5-40℃~+125℃ 1 1 1.6V~5.5V 10uA 5.5ns@5V,15pF 74LV 8mA 8mA Level shifting Push-pull Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, Transceivers
74LVC3G17DP
TSSOP-8-40℃~+125℃ 1 1.65V~5.5V 3 3.6ns@3.3V,50pF 32mA 32mA 4uA 74LVC Schmitt trigger Unidirectional TSSOP-8 Buffers, Drivers, Receivers, Transceivers ROHSNexperiaBuffers, Drivers, Receivers, Transceivers
TLV61046ADBV
SOT-23-6-40℃~+125℃@(TJ) 1 1.05MHz 1.8V~5.5V 110uA 3.3V~28V Adjustable Boost Boost Built-in No Overcurrent Protection、Light load efficient mode、Load disconnect SOT-23-6 DC-DC Converters ROHSTexas InstrumentsDC-DC ConvertersELW2106AA
-OLED DisplayFutaba Elec
README
README.mduartwise
SerialLogger Hardware
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 4.7µF | Capacitor_SMD:C_0805_2012Metric | C2, C7, C8, C9, C11, C12, C17, C18 |
| 7 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP5, TP6, TP7, TP8, TP9 |
| 5 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C4, C13, C14, C16 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric | R3, R4, R6, R8, R12 |
| 5 | 10nF | Capacitor_SMD:C_0402_1005Metric | C5, C10, C15, C19, C20 |
| 4 | MouseBite | Jitter_Footprints:MouseBite_3.5mmx2.2mm_breakaway | MB1, MB2, MB3, MB4 |
| 4 | ToolingHole | Jitter_Footprints:Tooling_hole_4mm_4.04mm_paste | TH1, TH2, TH3, TH4 |
| 3 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R7, R13 |
| 3 | LOGO | Logo:GND | G***, G***, G*** |
| 3 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H2, H3, H4 |
| 2 | 1.0µF | Capacitor_SMD:C_0603_1608Metric | C3, C6 |
| 2 | 220 | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 2 | 47 | Resistor_SMD:R_0402_1005Metric | R9, R10 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP3, TP4 |
| 2 | sn74lv1t34 | Package_TO_SOT_SMD:SOT-23-5 | U4, U6 |
| 1 | 1.1M | Resistor_SMD:R_0402_1005Metric | R11 |
| 1 | 22µH | Inductor_SMD:L_1812_4532Metric | L1 |
| 1 | 56k | Resistor_SMD:R_0402_1005Metric | R14 |
| 1 | 74LVC3G17 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U2 |
| 1 | Battery_Cell | Jitter_Footprints:BatteryHolder_Keystone_1043(p)_1x18650 | BT1 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Conn_01x04_Female | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Horizontal | J3 |
| 1 | Conn_ARM_JTAG_SWD_10 | Connector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMD | J1 |
| 1 | ELW2106AA | Jitter_Footprints:Molex_503480-1400-1x14-1MP_P0.5mm_Horizontal | H1 |
| 1 | LOGO | Jitter_Logos:Jitter-mini | G*** |
| 1 | LOGO | Jitter_Logos:Jitter-med | G*** |
| 1 | Rotary_Encoder_Switch_DualLED | Jitter_Footprints:PEL12D-4xxxS-Sxxxx | SW1 |
| 1 | STM32G070KBT6 | Package_QFP:LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | SW_SPDT | Jitter_Footprints:slide_switch_09.03201.02 | SW2 |
| 1 | TLV61046ADB | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | TLV70228_SOT23-5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
Questions
How big is the Serial logger prototype PCB?
It measures 100 × 46 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Serial logger prototype use?
74 parts, built around the STM32G070KBT6, SN74LV1T34DBV, 74LVC3G17DP and TLV61046ADBV. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Serial logger prototype KiCad files?
From the JitterCompany/uartwise repository on GitHub, at the commit this page was made from: the board is pcb/serial-logger-prototype.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Serial logger prototype design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers40.4 × 22.5 mm
- 2 layers100.1 × 50.8 mm
- 2 layers229.6 × 198.8 mm
- 2 layers234 × 58 mm
PGA2311 3
dmsd-lab/AMP8611
AMP8611 - open hardware integrated stereo power amplifier with a 2-channel input selector, PGA2311 digital volume control and LM3886 power stages
213 partsCERN-OHL-S-2.0 - 2 layers69.7 × 62.2 mm
SEVC
us3r-d0e5nt-3x1st/SEVC-Small-Electric-Vechicle-Controller
A small and efficient ESC made for all kinds of EV
91 partsUnlicense - 2 layers42 × 42 mm
- 2 layers66 × 50 mm
