

NexusCard
The next-gen business card
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 55
- Pads
- 73
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 30 May 2025
- Updated
- 2 Jun 2025
Overview
NexusCard is an open-source printed circuit board by aln730, from the aln730/NexusCard repository on GitHub. It is a 2-layer board with 3 parts on 55 nets.
It is built around the RP2040 and W25Q128JVSIQ. It belongs with the RP2040 boards of this library.
Main components
2RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASH
README
README.mdRP2350 Smart Business Card
A custom PCB business card featuring:
- USB HID functionality
- Micro-OLED display
- NFC tag with static UID switching
- IR transmitter
- Rechargeable via USB-C
To-Do
Hardware
- Select microcontroller (RP2350)
- Choose OLED display (I2C)
- Add NFC tag with static UID toggle
- Add IR transmitter (38kHz)
- Include USB-C port with CC resistors
- Add TP4056 for battery charging
- Design schematic in KiCad
- Route PCB to standard card size (85mm x 54mm)
- Order and assemble test PCBs
Firmware
- Set up base project with Pico SDK
- Implement USB HID (keyboard)
- Drive OLED with simple menu/UI
- Handle NFC UID switching via GPIO
- IR transmission with known codes
- Optional: battery monitoring
Documentation
- KiCad schematic and layout
- Bill of Materials (BOM)
- Assembly instructions
- Flashing/programming guide
- Demo and usage examples
Goals
- Compact, hackable, sci-fi-themed business card
- Show off skills as a computer engineer
- Functional gadget, not just a card
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | NCP1117-1.5_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U3 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U2 |
Similar boards
- 2 layers42 × 67 mm

- 2 layers181 × 97 mm

OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 4 layers82.6 × 82.5 mm

- 4 layers102.9 × 96.7 mm

PicoGUS chipdown
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
99 parts805 - 4 layers180.8 × 300.3 mm

Dilemma
Bastardkb/Dilemma
The Dilemma is a vertical stagger low-profile keyboard with mods.
383 parts590 - 2 layers130.4 × 76.6 mm

Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers78 × 60 mm

- 2 layers44 × 44 mm

Questions
What parts does the NexusCard use?
3 parts, built around the RP2040 and W25Q128JVSIQ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the NexusCard KiCad files?
From the aln730/NexusCard repository on GitHub, at the commit this page was made from: the board is NexusCard.kicad_pcb and its schematic NexusCard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the NexusCard design in my own project?
Its repository states no licence, so its author keeps all rights: ask aln730 before reusing the design.