

Blinky
- Size
- 33 × 32 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 7
- Nets
- 7
- Pads
- 21
- Tracks, vias
- 59, 5
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Jul 2025
- Updated
- 26 Jul 2025
Overview
Blinky is an open-source printed circuit board by alixsaher, from the alixsaher/PCB-Blinky repository on GitHub. It is a 2-layer board of 33 × 32 mm with 7 parts on 7 nets, routed with 59 tracks and 5 vias.
It is built around the CR2032. Its parts include 3 resistors, 1 capacitor, 1 IC and 1 diode.
Main components
1Parts
7| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 1K | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R1, R3 |
| 1 | 1u | Capacitor_SMD:C_2220_5750Metric_Pad1.97x5.40mm_HandSolder | C1 |
| 1 | 470K | Resistor_SMD:R_0612_1632Metric_Pad1.18x3.40mm_HandSolder | R2 |
| 1 | CR2032 | blinkyfp:S8211 -46R | BT1 |
| 1 | LED | Capacitor_SMD:C_2220_5750Metric_Pad1.97x5.40mm_HandSolder | D1 |
| 1 | ~ | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1 |
Similar boards
- 2 layers333.4 × 149.9 mm

- 2 layers17.2 × 30.4 mm

- 4 layers188 × 188 mm

- 2 layers61 × 36.8 mm

- 2 layers59.2 × 41 mm

- 2 layers35 × 35 mm

- 2 layers90 × 89.4 mm

- 2 layers170.2 × 100 mm

Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0
Questions
How big is the Blinky PCB?
It measures 33 × 32 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Blinky use?
7 parts, built around the CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Blinky KiCad files?
From the alixsaher/PCB-Blinky repository on GitHub, at the commit this page was made from: the board is blinky.kicad_pcb and its schematic blinky.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Blinky design in my own project?
Its repository states no licence, so its author keeps all rights: ask alixsaher before reusing the design.