Skip to the content
4 layers17.8 × 35.6 mmSerafino l432kc, the printed circuit board in 3D
Size
17.8 × 35.6 mm
Copper layers
4
Thickness
1.6 mm
Parts
34
Nets
44
Pads
149
Tracks, vias
299, 29
Pours
2
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
2 Dec 2020
Updated
16 Apr 2022

Overview

Serafino l432kc is an open-source printed circuit board by alfonsotames, from the alfonsotames/zerafino_pcb repository on GitHub. It is a 4-layer board of 17.8 × 35.6 mm with 34 parts on 44 nets, routed with 299 tracks and 29 vias.

It is built around the STLQ020C33R, USBLC6-2SC6 and B5819W, with the SI3401A-TP among its other parts. Its parts include 9 capacitors, 5 resistors, 4 diodes, 3 ICs and 3 connectors. It belongs with the STM32 boards of this library.

Main components

4

Parts

34
QtyValueFootprintReferences
2100nFCapacitor_SMD:C_0402_1005MetricC6, C7
21uFCapacitor_SMD:C_0603_1608MetricC1, C10
24.3pFCapacitor_SMD:C_0603_1608MetricC4, C5
2Conn_01x14Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_VerticalJ2, J3
2SW_PushButton_Switch_SMD:SW_Push_1P1T_NO_Vertical_Wuerth_434133025816SW1, SW2
1100kResistor_SMD:R_0603_1608MetricR5
110KResistor_SMD:R_0603_1608MetricR2
110nFCapacitor_SMD:C_0603_1608MetricC9
11KResistor_SMD:R_0603_1608MetricR3
12.2uFCapacitor_SMD:C_0603_1608MetricC3
1200mAFuse:Fuse_0603_1608MetricF1
1270Resistor_SMD:R_0603_1608MetricR1
132.768Kserafino l432kc:NX3215SAY1
1330Resistor_SMD:R_0603_1608MetricR4
14.7uFCapacitor_Tantalum_SMD:CP_EIA-1608-08_AVX-JC8
1600@100MHzInductor_SMD:L_0603_1608MetricL1
1600@100MHzInductor_SMD:L_0805_2012MetricFB1
1B5819WDiode_SMD:D_SOD-123D2
1BLUELED_SMD:LED_0603_1608MetricD4
1GREENLED_SMD:LED_0603_1608MetricD3
1LOGOserafino l432kc:big_cupidG***
1LOGOserafino l432kc:logo_materiamG***
1LOGOserafino l432kc:cupidG***
1REDLED_SMD:LED_0603_1608MetricD1
1SI3401A-TPPackage_TO_SOT_SMD:SOT-23Q1
1STLQ020C33Rserafino l432kc:STMicroelectronics-ESDALC6V1W5-0U1
1STM32L432KCUxPackage_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mmU3
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U2
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001J1

Similar boards

  • 4 layers51.7 × 7.9 mmDCPowerFire, the printed circuit board in 3D

    DCPowerFire

    Techbeard/Arc-Lighter-PCB

    A replacement PCB for an arc lighter

    50 parts4MIT
  • 4 layers20 × 45 mmStm32, the printed circuit board in 3D

    Stm32

    NgThachThanh/stm32-buck-vs-ldo

    Benchmark năng lượng đầu vào Buck TPS62840 vs LDO STLQ020 trên cùng PCB STM32L432+BME280 duty-cycle Stop2 — INA228 20-bit, 3.30-4.20V, 286 runs, KiCad + Python

    30 partsMIT
  • 2 layers80 × 47.5 mmWater sample collector iot main, the printed circuit board in 3D

    Water sample collector iot main

    TheTesla/HTW-Water-Sample-Collector

    Coolecting water samples during flood events and send notify message

    81 parts
  • 2 layers123.5 × 21.3 mmVibook, the printed circuit board in 3D

    Vibook

    vision-05/vibook

    Touch sensitive book pcb schematic

    78 parts
  • 4 layers70 × 43 mmUSMU v10, the printed circuit board in 3D

    USMU v10

    joeltroughton/uSMU

    Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware

    137 parts187
  • 2 layers50 × 66 mmBluePhil, the printed circuit board in 3D

    BluePhil

    pms67/BluePhil

    STM32-based development board with various sensors.

    106 parts53MIT
  • 2 layers285 × 94.5 mmRmk ble keyboard, the printed circuit board in 3D

    Rmk ble keyboard

    HaoboGu/rmk-ble-keyboard

    A fully open source BLE/USB dual-mode GH60 keyboard powered by rmk

    160 parts42GPL-3.0
  • 2 layers46.8 × 52 mmUsb dev board, the printed circuit board in 3D

    Usb dev board

    cs2dsb/stm32-usb.rs

    A dev board designed to facilitate the development of USB firmware for STM32

    57 parts30Apache-2.0

Questions

How big is the Serafino l432kc PCB?

It measures 17.8 × 35.6 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Serafino l432kc use?

34 parts, built around the STLQ020C33R, USBLC6-2SC6, B5819W and SI3401A-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Serafino l432kc KiCad files?

From the alfonsotames/zerafino_pcb repository on GitHub, at the commit this page was made from: the board is serafino l432kc.kicad_pcb and its schematic serafino l432kc.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Serafino l432kc design in my own project?

Its repository states no licence, so its author keeps all rights: ask alfonsotames before reusing the design.