Skip to the content
12345

STLQ020C33R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 15uVrms 200mA 3.3V 300nA 5.5V 52dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-323-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/STLQ020C33R
Category
Uncategorised
Package
SOT-323-5
Pins
5
In stock
30 at JLCPCB (C2970558)
Used on
5 open-source boards

Overview

The STLQ020C33R is an uncategorised made by STMicroelectronics in a SOT-323-5 package with 5 pins. -40℃~+125℃@(Tj) 1 15uVrms 200mA 3.3V 300nA 5.5V 52dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection、Enable、Short Circuit Protection Positive SOT-323-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:APL5156BI-TRG, from EasyEDA) and its footprint (EasyEDA_Cloud:TSSOP-5_L2.0-W1.3-P0.65-LS2.1-BL, from EasyEDA), ready for a KiCad board. 30 are in stock at JLCPCB (part C2970558). 5 open-source boards in 5 repositories on GitHub use it.

Symbol

1VIN2GND3EN4NC/ADJ5VOUT
EasyEDA_Cloud:APL5156BI-TRGFrom EasyEDA

Footprint

12345
EasyEDA_Cloud:TSSOP-5_L2.0-W1.3-P0.65-LS2.1-BLFrom EasyEDA

Pinout

5
The pins of the STLQ020C33R
PinNameType
1VINUnspecified
2GNDUnspecified
3ENUnspecified
4NC/ADJUnspecified
5VOUTUnspecified

Open-source boards using it

5
  • 4 layers51.7 × 7.9 mmDCPowerFire, the printed circuit board in 3D

    DCPowerFire

    Techbeard/Arc-Lighter-PCB

    A replacement PCB for an arc lighter

    50 parts4MIT
  • 4 layers20 × 45 mmStm32, the printed circuit board in 3D

    Stm32

    NgThachThanh/stm32-buck-vs-ldo

    Benchmark năng lượng đầu vào Buck TPS62840 vs LDO STLQ020 trên cùng PCB STM32L432+BME280 duty-cycle Stop2 — INA228 20-bit, 3.30-4.20V, 286 runs, KiCad + Python

    30 partsMIT
  • 2 layers80 × 47.5 mmWater sample collector iot main, the printed circuit board in 3D

    Water sample collector iot main

    TheTesla/HTW-Water-Sample-Collector

    Coolecting water samples during flood events and send notify message

    81 parts
  • 2 layers123.5 × 21.3 mmVibook, the printed circuit board in 3D

    Vibook

    vision-05/vibook

    Touch sensitive book pcb schematic

    78 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the STLQ020C33R?

Yes. The symbol is EasyEDA_Cloud:APL5156BI-TRG and the footprint EasyEDA_Cloud:TSSOP-5_L2.0-W1.3-P0.65-LS2.1-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the STLQ020C33R?

SOT-323-5, with 5 pins. Its footprint is drawn on this page.

Where is the STLQ020C33R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the STLQ020C33R?

JLCPCB lists it as part C2970558, with 30 in stock; the sellers' links on this page open their listings.

What can replace the STLQ020C33R?

Parts like it in the library: the TPAP2125K-3.3TRG1 by TECH PUBLIC, the AMS1117-3.3OE by GREENMICRO, the LM1117-3.3 by hongjiacheng and the MSK1117-3.3V by MSKSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the STLQ020C33R?

5 boards in 5 repositories on GitHub; the most starred are listed on this page, with their KiCad files.