4 layers30 × 30 mm
003RoboticsStartStop - Dev
Alex-C-EE/StartStopModule
A repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.
38 parts
4 layers12 × 11 mm
003RoboticsStartStop
Alex-C-EE/StartStopModuleA repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.
- Size
- 12 × 11 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 16
- Nets
- 26
- Pads
- 62
- Tracks, vias
- 103, 32
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Nov 2025
- Updated
- 12 Dec 2025
Overview
003RoboticsStartStop is an open-source printed circuit board by Alex-C-EE, from the Alex-C-EE/StartStopModule repository on GitHub. It is a 4-layer board of 12 × 11 mm with 16 parts on 26 nets, routed with 103 tracks and 32 vias.
It is built around the STM32C011F4P6, LDK220PU33R and TSOP39236, with the H3V3N10B and 1SS389 among its other parts. Its parts include 4 capacitors, 4 diodes, 3 ICs, 2 connectors and 1 resistor. It belongs with the STM32 boards of this library.
Main components
5
STM32C011F4P6
TSSOP-20-40℃~+85℃ 16KB 18 2V~3.6V 32 Bit 48MHz 6KB ARM Cortex-M0+ Built-in+External FLASH TSSOP-20 Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
LDK220PU33R
DFN-6L(1.2x1.3)-40℃~+125℃@(Tj) 1 100uA 13.2V 200mA 20uVrms 3.3V 350mV@(200mA) 55dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal Shutdown、Enable control DFN-6L(1.2x1.3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
TSOP39236
插件Infrared Remote Receiver (IRM)Vishay Intertechnology
H3V3N10B
DFN1006-2L-55℃~+125℃ 10V 12.5pF 3.3V 50nA 6V 80W@8/20us 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 DFN1006-2L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)
1SS389
SOD-523Schottky Diodeshongjiacheng
README
README.mdStartStopModule
A repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.
Parts
16| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100nF | PCM_JLCPCB:C_0402 | C2, C6 |
| 2 | 1uF | PCM_JLCPCB:C_0402 | C1, C4 |
| 2 | H3V3N10B | PCM_JLCPCB:D_DFN1006-2L | D1, D2 |
| 1 | 100 mA | Fuse:Fuse_0603_1608Metric | F1 |
| 1 | 1SS389 | PCM_JLCPCB:D_SOD-523 | D3 |
| 1 | 1kΩ | PCM_JLCPCB:R_0402 | R1 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J1 |
| 1 | I/O Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | LDK220PU33R | UniversalAlexLibrary:LDK220PU33R | U4 |
| 1 | LOGO | LOGO | G*** |
| 1 | Red | PCM_JLCPCB:D_0603 | D4 |
| 1 | STM32C011F4 | Package_DFN_QFN:ST_UFQFPN-20_3x3mm_P0.5mm | U3 |
| 1 | TSOP392 | UniversalAlexLibrary:TVCastSMD4 | U2 |
Questions
How big is the 003RoboticsStartStop PCB?
It measures 12 × 11 mm and has 4 copper layers, 1.6 mm thick.
What parts does the 003RoboticsStartStop use?
16 parts, built around the STM32C011F4P6, LDK220PU33R, TSOP39236 and H3V3N10B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the 003RoboticsStartStop KiCad files?
From the Alex-C-EE/StartStopModule repository on GitHub, at the commit this page was made from: the board is 003Robotics/Modul/003RoboticsStartStop/003RoboticsStartStop.kicad_pcb and its schematic 003Robotics/Modul/003RoboticsStartStop - Dev/003RoboticsStartStop - Dev.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the 003RoboticsStartStop design in my own project?
Its repository states no licence, so its author keeps all rights: ask Alex-C-EE before reusing the design.
More from Alex-C-EE/StartStopModule
2- 2 layers10.4 × 11.4 mm
Schematic start module sumo IR V0 16 v1
Alex-C-EE/StartStopModule
A repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.
20 parts
Similar boards
- 4 layers100 × 70 mm
- 4 layers163 × 174.4 mm
Gd rev3b
baldengineer/Mega-IIe
Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!
440 parts33MIT - 2 layers14.5 × 48.5 mm
- 2 layers249.3 × 118.8 mm
Electrical design hvac v2
salvatore999uwo/mini_hvac_v2
Second version of the temperature control system for a small model room.
71 parts - 4 layers107.6 × 72.2 mm
- 2 layers50 × 40 mm
2026 STM32
waterloo-rocketry/electrical_tutorials
Hardware & software used in electrical tutorials
33 parts - 4 layers90 × 65 mm
Final chain
misko/prompt2device
The separate vNext PCB skill and orchestrator package is available alongside the reference workflow below; existing projects keep their accepted toolchain until an explicit migration.
37 parts3MIT - 4 layers24.5 × 14 mm
