Skip to the content

LDK220PU33R

STMicroelectronicsExtended

-40℃~+125℃@(Tj) 1 100uA 13.2V 200mA 20uVrms 3.3V 350mV@(200mA) 55dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal Shutdown、Enable control DFN-6L(1.2x1.3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS

Part id
st/LDK220PU33R
Category
Voltage Regulators, Linear, Low Drop Out (LDO) Regulators
Package
DFN-6L(1.2x1.3)
Pins
6
In stock
30,870 at JLCPCB (C2965384)
Used on
2 open-source boards

Overview

The LDK220PU33R is a voltage Regulators, Linear, Low Drop Out (LDO) Regulator made by STMicroelectronics in a DFN-6L(1.2x1.3) package with 6 pins. -40℃~+125℃@(Tj) 1 100uA 13.2V 200mA 20uVrms 3.3V 350mV@(200mA) 55dB@(1kHz) Fixed Positive Short Circuit Protection、Thermal Shutdown、Enable control DFN-6L(1.2x1.3) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHS.

PCBKit's library has its KiCad symbol (EasyEDA_Cloud:LDK220PU33R, from EasyEDA) and its footprint (EasyEDA_Cloud:DFN-6_L1.3-W1.2-P0.40-BL, from EasyEDA), ready for a KiCad board. 30,870 are in stock at JLCPCB (part C2965384). 2 open-source boards in 1 repository on GitHub use it.

Symbol

1OUT2N/C3ADJ/NC4EN5GND6IN
EasyEDA_Cloud:LDK220PU33RFrom EasyEDA

Footprint

EasyEDA_Cloud:DFN-6_L1.3-W1.2-P0.40-BLFrom EasyEDA

Pinout

6
The pins of the LDK220PU33R
PinNameType
1OUTUnspecified
2N/CUnspecified
3ADJ/NCUnspecified
4ENUnspecified
5GNDUnspecified
6INUnspecified

Open-source boards using it

2
  • 4 layers30 × 30 mm003RoboticsStartStop - Dev, the printed circuit board in 3D

    003RoboticsStartStop - Dev

    Alex-C-EE/StartStopModule

    A repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.

    38 parts
  • 4 layers12 × 11 mm003RoboticsStartStop, the printed circuit board in 3D

    003RoboticsStartStop

    Alex-C-EE/StartStopModule

    A repo containing original and custom start stop modules for robo sumo and their firmware. Manufacturing files generated.

    16 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the LDK220PU33R?

Yes. The symbol is EasyEDA_Cloud:LDK220PU33R and the footprint EasyEDA_Cloud:DFN-6_L1.3-W1.2-P0.40-BL, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the LDK220PU33R?

DFN-6L(1.2x1.3), with 6 pins. Its footprint is drawn on this page.

Where is the LDK220PU33R datasheet?

STMicroelectronics publishes it: the Datasheet link on this page opens it.

Where can I order the LDK220PU33R?

JLCPCB lists it as part C2965384, with 30,870 in stock; the sellers' links on this page open their listings.

What can replace the LDK220PU33R?

Parts like it in the library: the LDK120PU33R by STMicroelectronics, the AMS1117-3.3 by Advanced Monolithic Systems, the AMS1117-3.3 by UMW and the XC6206P332MR-MS by MSKSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the LDK220PU33R?

2 boards in 1 repository on GitHub; the most starred are listed on this page, with their KiCad files.