Skip to the content
4 layers0.5 × 46 mmEval boards, the printed circuit board in 3D

Fluid Simulator Pendant Hardware (PCB)

Size
0.5 × 46 mm
Copper layers
4
Thickness
1.8 mm
Parts
257
Nets
83
Pads
640
Tracks, vias
1,445, 296
Pours
509
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Sep 2025
Updated
21 Dec 2025

Overview

Eval boards is an open-source printed circuit board by alaziuk, from the alaziuk/fluid_simulator_hardware repository on GitHub. It is a 4-layer board of 0.5 × 46 mm with 257 parts on 83 nets, routed with 1,445 tracks and 296 vias.

It is built around the BMA400 and BQ25895RTW. Its parts include 179 diodes, 36 resistors, 22 capacitors, 4 ICs and 3 connectors. It belongs with the STM32 boards of this library.

Main components

2

README

README.md

Fluid Simulator Pendant Hardware

Parts

257
QtyValueFootprintReferences
179blue ledDiode_SMD:D_0603_1608MetricD1, D10, D11, D100, D101, D102, D103, D104, D105, D106, D107, D108, D109, D110, D111, D112 +163
17100RResistor_SMD:R_0603_1608MetricR2, R5, R6, R7, R8, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20 +1
9100nCapacitor_SMD:C_0603_1608MetricC2, C3, C4, C5, C6, C7, C13, C21, C22
810kResistor_SMD:R_0603_1608MetricR1, R22, R28, R29, R30, R31, R35, R36
40RResistor_SMD:R_0603_1608MetricR3, R4, R33, R34
310uCapacitor_SMD:C_0603_1608MetricC16, C17, C19
22u2Inductor_SMD:L_0603_1608MetricL1, L2
23pCapacitor_SMD:C_0603_1608MetricC8, C9
25k1Resistor_SMD:R_0603_1608MetricR23, R24
28pCapacitor_SMD:C_0603_1608MetricC10, C11
2GNDTestPoint:TestPoint_Pad_D1.0mmGND, GND
2SolderJumper_2_OpenJumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mmJP1, JP2
110nCapacitor_SMD:C_0603_1608MetricC1
11uCapacitor_SMD:C_0603_1608MetricC12
122uCapacitor_SMD:C_0603_1608MetricC20
125.00M-SMDHC49SCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1270RResistor_SMD:R_0603_1608MetricR26
12k2Resistor_SMD:R_0603_1608MetricR21
130k1Resistor_SMD:R_0603_1608MetricR27
136k5Resistor_SMD:R_0603_1608MetricR32
13V3TestPoint:TestPoint_Pad_D1.0mm3V3
140uCapacitor_SMD:C_0603_1608MetricC14
147nCapacitor_SMD:C_0603_1608MetricC15
14u7Capacitor_SMD:C_0603_1608MetricC18
15k23Resistor_SMD:R_0603_1608MetricR25
1BAT+TestPoint:TestPoint_Pad_D2.5mmBAT+
1BAT-TestPoint:TestPoint_Pad_D2.5mmBAT-
1BMA400BMA400:XDCR_BMA400U4
1BQ SYSTestPoint:TestPoint_Pad_D1.0mmV_SYS
1BQ25895RTWPackage_DFN_QFN:Texas_RTW_WQFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalViasU2
1Conn_01x03_PinConnector_JST:JST_GH_BM03B-GHS-TBT_1x03-1MP_P1.25mm_VerticalJ2
1G83270025Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY2
1STM32L051C6TxPackage_QFP:LQFP-48_7x7mm_P0.5mmU1
1TC2030Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_VerticalJ1
1TPS63900Package_SON:WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm_ThermalViasU3
1USB 5VTestPoint:TestPoint_Pad_D1.0mm5V
1USB_C_Receptacle_PowerOnly_6PConnector_USB:USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_HorizontalJ3

Similar boards

  • 4 layers45 × 41 mmOsw, the printed circuit board in 3D

    Osw

    Open-Smartwatch/open-smartwatch-gps

    Hardware design files for the GPS version of the open-smartwatch

    70 parts243GPL-3.0
  • 4 layers83 × 109 mmD4 small pcb panel, the printed circuit board in 3D

    D4 small pcb panel

    unsurv/unsurv-offline

    Offline portable GNSS device based on the ESP32

    522 parts72
  • 2 layers76.2 × 96.5 mmTeensy RV Leveling Helper v2, the printed circuit board in 3D

    Teensy RV Leveling Helper v2

    mjculross/Teensy-RV-Leveling-Helper

    RV LEveling Helper using Teensy 4.0 + BMA400 Triple Axis Accelerometer Breakout + ILI9341 Color 320x240 TFT Touchscreen display

    21 parts21MIT
  • 2 layers38.1 × 3.8 mmShio, the printed circuit board in 3D

    Shio

    uw-x/clearbuds-hw

    Errata: The design contains some errors that can be addressed in future revisions. The errors do not affect function, but do affect robustness. 1. Add 0.1uF decoupling capacitor to PDM mic (ICS-41350) Vcc. 2.

    86 parts17
  • 8 layers42.2 × 67.2 mmOBC PCB, the printed circuit board in 3D

    OBC PCB

    timohueser/OpenBikeComputer

    Open source Bikecomputer with a focus on exploration and adventure.

    186 parts11GPL-3.0
  • 2 layers44.1 × 51 mmPicowalker-32, the printed circuit board in 3D

    Picowalker-32

    mamba2410/picowalker-32

    PCB + firmware for Pokewalker-like device

    50 parts9
  • 4 layers25.4 × 25.4 mmInt bluetooth, the printed circuit board in 3D

    Int bluetooth

    TUDSSL/FreeBie

    To compile FreeBie runtime we used the GNU Arm Embedded Toolchain (9.3.1) and CMake (3.19.1) to build the project. To program the MCU we used the J-Link debug probe with the accompanying J-Link software.

    85 parts6MIT
  • 4 layers32.7 × 7.6 mmOsw spy, the printed circuit board in 3D

    Osw spy

    akinbender/open-smartwatch-spy

    Spy edition of the open-smartwatch by @uvwxy

    61 parts5GPL-3.0

Questions

How big is the Eval boards PCB?

It measures 0.5 × 46 mm and has 4 copper layers, 1.8 mm thick.

What parts does the Eval boards use?

257 parts, built around the BMA400 and BQ25895RTW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Eval boards KiCad files?

From the alaziuk/fluid_simulator_hardware repository on GitHub, at the commit this page was made from: the board is Eval_boards.kicad_pcb and its schematic Eval_boards.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Eval boards design in my own project?

Its repository states no licence, so its author keeps all rights: ask alaziuk before reusing the design.