

Errata: The design contains some errors that can be addressed in future revisions. The errors do not affect function, but do affect robustness. 1. Add 0.1uF decoupling capacitor to PDM mic (ICS-41350) Vcc. 2.
- Size
- 38.1 × 3.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 95
- Pads
- 362
- Tracks, vias
- 788, 123
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 28 Apr 2022
- Updated
- 12 Jul 2022
Overview
Shio is an open-source printed circuit board by uw-x, from the uw-x/clearbuds-hw repository on GitHub. It is a 2-layer board of 38.1 × 3.8 mm with 86 parts on 95 nets, routed with 788 tracks and 123 vias.
It is built around the NRF52840-CKAA-R7, MAX38640AENT+ and W25N01GVZEIGTR, with the BMA400, 10118193-0001LF and 2450AT18A100E among its other parts. Its parts include 23 capacitors, 20 resistors, 8 inductors, 7 ICs and 2 diodes. It belongs with the nRF52 and nRF5x boards of this library.
Main components
9NRF52840-CKAA-R7
WLCSP-93(3.5x3.6)-95dBm 1.7V~5.5V 2.4GHz 2.4GHz~2.4835GHz 2Mbps 8dBm SPI、USB、UART、ADC、I2S、PDM、PWM ZigBee、Bluetooth、LoRa、ISM transceiver WLCSP-93(3.5x3.6) RF Transceiver ICs ROHSNordic SemiconRF Transceiver ICsMAX38640AENT+
WLP-60℃~+70℃ 3V~3.6V WLP-6 DC-DC Converters ROHSAnalog DevicesDC-DC ConvertersW25N01GVZEIGTR
WSON-8(6x8)WSON-8(6x8) NAND FLASH ROHSWinbond ElecNAND FLASHBMA400
LGA-12(2x2)-40℃~+85℃ 1.71V~3.6V 12bit 160nA 1KB Accelerometer SPI、I2C X,Y,Z ±16g LGA-12(2x2) Accelerometers ROHSBosch SensortecAccelerometers10118193-0001LF
SMD-55℃~+85℃ 1 1.8A 100V 5P Black Female Micro-B Surface Mount, Right Angle USB 2.0 SMD USB Connectors ROHSAmphenolUSB Connectors2450AT18A100E
1206-40℃~+125℃ 0.5dBi 1.3mm 1.6mm 2.4GHz 2W 3.2mm 50Ω Patch Antenna SMA 1206 Antennas ROHSJohanson DielectricsAntennasB3U-1000P
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile SwitchesBAT-HLD-001-THM
插件插件 Button And Strip Battery Connector ROHSTE ConnectivityButton And Strip Battery ConnectorICS-41350
SMD-5P,3.5x2.7mm-32dB -40℃~+85℃ 0.98mm 1.65V~3.63V 2.65mm 3.5mm 64dB 750uA Omnidirectional Omnidirectional pickup SMD-5P,3.5x2.7mm MEMS Microphones ROHSTDK InvenSenseMEMS Microphones
README
README.mdClearBuds: Wireless Binaural Earbuds for Learning-based Speech Enhancement
Abstract
We present ClearBuds, the first end-to-end hardware and software system that utilizes a neural network to enhance speech streamed from two wireless earbuds. Real-time speech enhancement for wireless earbuds requires high-quality sound separation and background cancellation, operating in real-time and on a mobile phone. ClearBuds bridges state-of-the-art deep learning for blind audio source separation and in-ear mobile systems by making two key technical contributions: 1) a new wireless earbud design capable of operating as a synchronized, binaural microphone array, and 2) a lightweight dual-channel speech enhancement neural network that runs on a mobile device. Results show that our wireless earbuds achieve a synchronization error less than 64 us and our network has a runtime of 21.4 ms on an accompanying mobile phone. In-the-wild evaluation with eight users in previously unseen indoor and outdoor multipath scenarios demonstrates that our neural network generalizes to learn both spatial and acoustic cues to perform noise suppression and background speech removal. In a user-study with 37 participants who spent over 15.4 hours rating 1041 audio samples collected in-the-wild, our system achieves improved mean opinion score and background noise suppression.
Contents
This directory contains the FPC (flexible printed circuit) design for ClearBuds. The FPC was designed in KiCAD 5.7.
- KiCAD design files are in shio_fpc folder.
- Fabrication output (Gerbers) are in shio_fpc/shio_rev_a_fab_v4. The suggested stack up is in shio_fpc/shio_stackup.xlsx. Suggested BOM is in shio_fpc/shio_BOM_rev_a_fab2_3.csv.
- Schematic PDF can be found at shio_fpc/shio_fpc_revA.pdf
Errata: The design contains some errors that can be addressed in future revisions. The errors do not affect function, but do affect robustness. 1. Add 0.1uF decoupling capacitor to PDM mic (ICS-41350) Vcc. 2. Extend battery holder terminal pads further under solder mask to prevent pad tearout. 3. Consider using FR4 stiffener or RFPC to better support battery holder terminal pads to prevent pad tearout.
Hardware Setup
- Download KiCad
- Go to https://www.kicad.org/download/
- Download the latest for your environment
- Open shio_fpc/shio.pro

Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | TestPoint | TestPoint:TestPoint_Pad_D0.5mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP10, TP11, TP12, TP13, TP14, TP15, TP16, TP17, TP18 +2 |
| 9 | 0R | Resistor_SMD:R_0201_0603Metric | R2, R5, R19, R20, R21, R22, R23, R25, R33 |
| 6 | 100nF | Capacitor_SMD:C_0201_0603Metric | C6, C13, C14, C15, C22, C23 |
| 5 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C5, C11, C12, C17 |
| 4 | 12pF | Capacitor_SMD:C_0201_0603Metric | C18, C19, C20, C21 |
| 4 | NO_STUFF | Resistor_SMD:R_0402_1005Metric | R10, R11, R28, R30 |
| 3 | 4.7uF | Capacitor_SMD:C_0402_1005Metric | C3, C7, C8 |
| 2 | 0R | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 0R | Inductor_SMD:L_0201_0603Metric | L4, L6 |
| 2 | 220R | Resistor_SMD:R_0201_0603Metric | R8, R9 |
| 2 | LM66100DCKT | Shio:LM66100DCKT | U1, U4 |
| 2 | NO_STUFF | Resistor_SMD:R_0201_0603Metric | R1, R4 |
| 1 | 0.5pF | Capacitor_SMD:C_0201_0603Metric | C16 |
| 1 | 10118193-0001LF | digikey-footprints:USB_Micro_B_Female_10118193-0001LF | J1 |
| 1 | 10uF | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 10uH | Inductor_SMD:L_0603_1608Metric | L3 |
| 1 | 15nH | Inductor_SMD:L_0201_0603Metric | L2 |
| 1 | 2.2uH | Inductor_SMD:L_0603_1608Metric | L1 |
| 1 | 2.7nH | Inductor_SMD:L_0201_0603Metric | L5 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C4 |
| 1 | 2450AT18A100E | digikey-footprints:Antenna_1.6x3.2mm_2450AT18A100E | ANT1 |
| 1 | 3.9nH | Inductor_SMD:L_0201_0603Metric | L8 |
| 1 | 32.768kHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 32MHz | Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm | Y3 |
| 1 | 47nF | Capacitor_SMD:C_0201_0603Metric | C2 |
| 1 | 768k | Resistor_SMD:R_0201_0603Metric | R3 |
| 1 | 820pF | Capacitor_SMD:C_0201_0603Metric | C10 |
| 1 | B3U-1000P | digikey-footprints:Switch_Tactile_SMD_B3U-1000P | S1 |
| 1 | BAT-HLD-001-THM | maruchi-kicad-library:LINX_BAT-HLD-001-THM | BT1 |
| 1 | BMA400 | Shio:XDCR_BMA400 | U5 |
| 1 | EXT_ANT | TestPoint:TestPoint_Pad_1.0x1.0mm | TP19 |
| 1 | ICS-41350 | Shio:MIC_ICS-41350 | MK1 |
| 1 | LED1 RED | LED_SMD:LED_0402_1005Metric | D1 |
| 1 | LED2 ORG | LED_SMD:LED_0402_1005Metric | D2 |
| 1 | MAX38640AENT+ | Shio:MAX38640AENT&plus_ | U2 |
| 1 | NO_STUFF | Inductor_SMD:L_0201_0603Metric | L7 |
| 1 | NRF52840-CKAA-R7 | Shio:BGA94N35P10X10_360X354X51N | U3 |
| 1 | SiP32431DR3 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U8 |
| 1 | W25N01GVZEIG_TR | Shio:SON127P800X600X80-9N | U6 |
Similar boards
- 6 layers20.3 × 15.2 mm

- 4 layers10 × 32 mm

- 2 layers13.8 × 8.4 mm

ICS41350 MEMS MicrophoneBoard
Tonikiller10000/JLC-BOARDS
Thease are some boards ordered from JLC-PCB witch contain multiple projects each.
3 parts1 - 6 layers13 × 9.4 mm

- 4 layers48 × 15 mm

Imu harvester
tiandahuang/keh-har-sensor
Design files for my thesis titled "Design of a Batteryless Sensor for Human Activity Recognition", submitted May 2024 towards an MS in Electrical and Computer Engineering at the University of Texas Austin.
63 parts - 4 layers25.4 × 25.4 mm

Int bluetooth
TUDSSL/FreeBie
To compile FreeBie runtime we used the GNU Arm Embedded Toolchain (9.3.1) and CMake (3.19.1) to build the project. To program the MCU we used the J-Link debug probe with the accompanying J-Link software.
85 parts6MIT - 2 layers

- 2 layers30 × 20 mm

PCB WLED Spec 7
Torie3/WLED-Usermod-SPEC7led
This usermod enables connection of an ESP32C3 (you can build the firmware for other boards) to a flight controller , allowing users to select specific presets with a switch on their remote.
55 partsMIT
Questions
How big is the Shio PCB?
It measures 38.1 × 3.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Shio use?
86 parts, built around the NRF52840-CKAA-R7, MAX38640AENT+, W25N01GVZEIGTR and BMA400. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Shio KiCad files?
From the uw-x/clearbuds-hw repository on GitHub, at the commit this page was made from: the board is shio_fpc/shio.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Shio design in my own project?
Its repository states no licence, so its author keeps all rights: ask uw-x before reusing the design.