

RapideUSBMini
My PCBs designs
- Size
- 55.5 × 40 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 14
- Nets
- 11
- Pads
- 40
- Tracks, vias
- 94, 10
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 1 May 2020
- Updated
- 27 May 2026
Overview
RapideUSBMini is an open-source printed circuit board by AlanFromJapan, from the AlanFromJapan/pcb-design repository on GitHub, published under the MIT licence. It is a 2-layer board of 55.5 × 40 mm with 14 parts on 11 nets, routed with 94 tracks and 10 vias.
It is built around the ATTINY85-20PU. Its parts include 4 resistors, 3 capacitors, 3 diodes, 2 connectors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
SA22C-PulseExtender/README.mdA simple NOT gate and a 555 monostable to "show" on a LED a 400 ns pulse every second that your eyes won't see otherwise.
Parts
14| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 22pF | Capacitor_THT:C_Rect_L4.6mm_W3.0mm_P2.50mm_MKS02_FKP02 | C1, C2 |
| 2 | 3.6v | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D1, D2 |
| 2 | 68 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 1.5k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 12MHz | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | 47uF+ | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C3 |
| 1 | ATtiny85-20P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Horizontal | J2 |
| 1 | LED | LED_THT:LED_D3.0mm_Clear | D3 |
| 1 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | ~ | kalshagar:USB_PCB | J1 |
More from AlanFromJapan/pcb-design
12- 2 layers50 × 50 mm

- 2 layers97.5 × 86.5 mm

- 2 layers45 × 65 mm

- 2 layers74 × 49.5 mm

- 2 layers50 × 100 mm

- 2 layers45 × 45 mm

- 2 layers29.5 × 41.5 mm

- 2 layers117.5 × 71.5 mm

- 2 layers

- 2 layers49.5 × 59.5 mm

- 2 layers39 × 34.5 mm

- 2 layers129.5 × 47.5 mm

Similar boards
- 2 layers22.2 × 46.4 mm

C64-Switchless Quad Kernal Switcher
bwack/C64-Switchless-Multi-Kernal-27C256-adapter
Kernal switcher for the C64/C64C/C128
14 parts112 - 2 layers30.7 × 76.1 mm

Repeater v2
plusvic/simplebus2-intercom
General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.
17 parts95CC0-1.0 - 2 layers101.5 × 54 mm

Simkarte
osmocom/osmocom-analog
Software Implementation of analog cellular telephony systems like NMT, TACS, IMTS, A/B/C-Netz; mirror of https://gitea.osmocom.org/cellular-infrastructure/osmocom-analog
15 parts32GPL-3.0 - 2 layers76.2 × 50.8 mm

Jerboa-8
strickyak/jerboa-attiny85-mod-synth
Modular Synthesizer using an ATtiny85 chip for each module.
23 parts31MIT - 2 layers

- 2 layers55.9 × 55.9 mm

- 2 layers71.1 × 40.6 mm

Tiny blinky
Hack-a-Day/Remoticon_KiCad_Blender
support files for the 2020 Remoticon KiCad to Blender > PCB renders workshop
21 parts22 - 2 layers242 × 60 mm

Questions
How big is the RapideUSBMini PCB?
It measures 55.5 × 40 mm and has 2 copper layers, 1.6 mm thick.
What parts does the RapideUSBMini use?
14 parts, built around the ATTINY85-20PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the RapideUSBMini KiCad files?
From the AlanFromJapan/pcb-design repository on GitHub, at the commit this page was made from: the board is RapideUSBMini/RapideUSBMini.kicad_pcb and its schematic BPi2m-Ethernet/BPi2m-Ethernet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the RapideUSBMini design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).