
ESP32Anglerfish
Matchboxscope/Matchboxscope
ESP32-based mini microscope for fluidic device observation

2 Relay Board is an open-source printed circuit board by ak-electronics, from the ak-electronics/2-relay-board-pcb repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 158 × 75 mm with 45 parts on 44 nets, routed with 410 tracks and 4 vias.
It is built around the AMS1117-5.0, 0.1UF 50V 5*11 and BD139. Its parts include 11 capacitors, 10 resistors, 5 ICs, 5 diodes and 3 connectors. It belongs with the home automation and IoT boards and the 8051 (CH55x, STC, AT89) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 10uf/50v | My Custom Footprint:C_1206_3216Metric | C1, C2, C6, C8, C12 |
| 4 | 0.1uf/50v | My Custom Footprint:C_1206_3216Metric | C3, C5, C7, C10 |
| 4 | 10K | My Custom Footprint:R_1206_3216Metric | R5, R9, R17, R18 |
| 4 | D | My Custom Footprint:D_1206 | D1, D2, D3, D4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | LOGO | My Custom Footprint:aramarket_logo | G***, G***, G*** |
| 2 | 1.5K | My Custom Footprint:R_1206_3216Metric | R2, R4 |
| 2 | 1K | My Custom Footprint:R_1206_3216Metric | R6, R7 |
| 2 | 330K | My Custom Footprint:R_1206_3216Metric | R1, R3 |
| 2 | BD139 | Package_TO_SOT_THT:TO-126-3_Vertical | Q1, Q2 |
| 2 | CA56-12EWA | My Custom Footprint:3_Digit_CA56-12EWA | U5, U6 |
| 2 | RAYEX-L90 | My Custom Footprint:Relay_SPDT_RAYEX-L90Ss | K1, K2 |
| 1 | 1000uf/50v | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C4 |
| 1 | 470uf/25v | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C11 |
| 1 | AMS1117-5.0 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U4 |
| 1 | Conn_01x02 | My Custom Footprint:Block_connector_2x1_H1.5_P8 | J1 |
| 1 | Conn_01x03 | My Custom Footprint:Block_connector | J2 |
| 1 | Conn_01x05 | My Custom Footprint:5_Pin_PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | D_Bridge_+-AA | My Custom Footprint:MB10_bridge | D7 |
| 1 | LM7809_TO220 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U3 |
| 1 | N76E003 | My Custom Footprint:SSOP-20_5.3x7.2mm_P0.65mm | U1 |

Matchboxscope/Matchboxscope
ESP32-based mini microscope for fluidic device observation







xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.
It measures 158 × 75 mm and has 2 copper layers, 1.6 mm thick.
45 parts, built around the AMS1117-5.0, 0.1UF 50V 5*11 and BD139. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ak-electronics/2-relay-board-pcb repository on GitHub, at the commit this page was made from: the board is 2 Relay Board.kicad_pcb and its schematic 2 Relay Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).