Skip to the content
2 layers137 × 85.5 mmRobot2, the printed circuit board in 3D

Este proyecto consiste en el diseño y construcción de un robot móvil capaz de resolver laberintos físicos con paredes de manera autónoma.

Size
137 × 85.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
32
Nets
81
Pads
124
Tracks, vias
94, 0
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Sep 2025
Updated
24 Feb 2026

Overview

Robot2 is an open-source printed circuit board by agumurray, from the agumurray/G8-TP1 repository on GitHub. It is a 2-layer board of 137 × 85.5 mm with 32 parts on 81 nets, routed with 94 tracks and 0 vias.

It is built around the HC-SR04.

Main components

1

README

README.md

TdP-Grupo8-2025

Robot resolutor de laberintos con EDU-CIAA

Este proyecto consiste en el diseño y construcción de un robot móvil capaz de resolver laberintos físicos con paredes de manera autónoma. El sistema utiliza como controlador principal la EDU-CIAA, que gestiona los sensores y motores, y ejecuta algoritmos de navegación para alcanzar la salida sin necesidad de un mapa previo.

Características principales

  • Exploración autónoma de laberintos físicos.

  • Algoritmos de resolución basados en estrategias clásicas (wall-following, Pledge, Trémaux).

  • Plataforma móvil con dos motores DC controlados mediante un puente H L298N.

  • Sensores ultrasónicos para la detección de paredes y obstáculos.

  • Posibilidad de extender funcionalidades con:

    • Telemetría mediante ESP32 e interfaz web.
    • Algoritmos de búsqueda óptima (Flood Fill, A*).
    • Sensores adicionales como giroscopio para corrección de trayectoria.

Tecnologías utilizadas

  • Hardware:

    • EDU-CIAA (controlador central).
    • Motores DC con puente H L298N.
    • Sensores ultrasónicos HC-SR04.
    • Batería y sistema de alimentación dedicado.
    • (Opcional) ESP32 para telemetría y giroscopio.
  • Software:

    • Lenguaje C para firmware en la EDU-CIAA.
    • Algoritmos de filtrado de señales y resolución de laberintos.
    • (Opcional) HTML/CSS/JavaScript para interfaz web de monitoreo.

Objetivos

  • General: Desarrollar un robot controlado por EDU-CIAA capaz de explorar físicamente un laberinto con paredes y alcanzar la salida mediante estrategias de navegación autónoma.

  • Primarios:

    1. Diseñar la plataforma mecánica y de potencia (chasis, ruedas, transmisión, alimentación).
    2. Integrar sensado frontal para detección de paredes/obstáculos.
    3. Implementar un algoritmo de resolución de laberintos con información local.
    4. Validar el funcionamiento en laberintos de prueba con métricas definidas.
  • Secundarios:

    1. Incorporar una interfaz web para recolectar telemetría.
    2. Implementar algoritmos de búsqueda óptima.
    3. Integrar un sensor giroscópico para corrección de maniobras.

Integrantes

Este proyecto fue desarrollado por el Grupo 8 en el marco de la materia Taller de Proyecto I en la Facultad de Ingeniería de la UNLP:

  • Cabral Ramiro Nicolas
  • Murray Agustín
  • González Juan
  • Mendoza Tomás

Parts

32
QtyValueFootprintReferences
16, , , , , , , , , , , , , , ,
310KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalRES 10K, RES 10K, RES 10K
320KResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R5, RES 20K
3HC-SR04Libreria_EDU_CIAA_NXP:HC-SR04HC-SR04-1, HC-SR04-2, HC-SR04-3
2Conn_02x20_Odd_EvenLibreria_EDU_CIAA_NXP:PIN_ARRAY_20X2CIAA-P1-1, CIAA-P2-1

The 27 most common of 32 parts.

Similar boards

  • 2 layers80 × 60 mmEnvMonitor, the printed circuit board in 3D

    EnvMonitor

    kennySzhucheng/EnvMonitor

    🌡️ 智能环境监测站 | STM32F103C8T6 + FreeRTOS + ESP8266 | 温湿度/光照/测距/OLED菜单/ThingSpeak上云 | 从裸机到RTOS到KiCad PCB全流程

    27 parts10
  • 2 layers120.7 × 184.1 mmBeachRover circuit, the printed circuit board in 3D

    BeachRover circuit

    wizardofrobots/roverCode

    Jetson Nano powered Arduino Rover

    11 parts10
  • 2 layers110 × 80 mmNoko 2, the printed circuit board in 3D

    Noko 2

    NikolaiRadke/Noko_2

    The do-it-yourself Arduino-based Noko monster. Version 2 with PCB and 3D printed casing.

    51 parts3Apache-2.0
  • 2 layers150 × 100 mmMaze kiCad, the printed circuit board in 3D

    Maze kiCad

    billtsol/Maze

    This project demonstrates how to use an Arduino board, IR sensors, and a motor driver shield to create a maze-solving robot.

    39 parts2
  • 2 layers111.5 × 102 mmWall e, the printed circuit board in 3D

    Wall e

    c-lydia/ESP-ROS2

    A tiny robot with IMU (MPU5060) and an ultrasonic sensor (HC-SR04), running on micro-ROS, communicating over UDP.

    12 parts2Apache-2.0
  • 2 layers25.2 × 27.3 mmCf2-hcsr04, the printed circuit board in 3D

    Cf2-hcsr04

    dbrgn/crazyflie2-hcsr04

    Ultrasonic sensor (HC-SR04) extension board for the Crazyflie 2.0

    9 parts2
  • 2 layersAegis, the printed circuit board in 3D

    Aegis

    YousefAliAicha/aegis-embedded-system

    Networked rotating ultrasonic radar system built on the Deneyap Kart 1A (ESP32-S3), with a real-time web dashboard served directly from the board.

    9 parts2MIT
  • 2 layers170.2 × 119.4 mmSentinel, the printed circuit board in 3D

    Sentinel

    YousefAliAicha/sentinel-arduino-firmware

    Adaptive traffic-light FSM on the Arduino UNO R3 — pedestrian preemption, LDR-gated night mode with HC-SR04 vehicle detection, and a multiplexed 7-segment countdown. Fully non-blocking.

    25 parts2MIT

Questions

How big is the Robot2 PCB?

It measures 137 × 85.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Robot2 use?

32 parts, built around the HC-SR04. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Robot2 KiCad files?

From the agumurray/G8-TP1 repository on GitHub, at the commit this page was made from: the board is schematics/robot2.kicad_pcb and its schematic schematics/robot2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Robot2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask agumurray before reusing the design.