4 layers85 × 85 mm
Hv pulse controller
wenzel-lab/high-voltage-pulse-generator
Custom electronics solution for microfluidic droplet sorting pulses
117 parts3
4 layers90.2 × 95.9 mm
Hyperion
AerodyneLabs/Hyperion1Hardware and firmware for the Hyperion motherboard
- Size
- 90.2 × 95.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 72
- Nets
- 53
- Pads
- 496
- Tracks, vias
- 0, 0
- Pours
- 3
- Routed
- Not yet
- KiCad
- KiCad 3
- Created
- 22 Jan 2013
- Updated
- 4 May 2014
Overview
Hyperion is an open-source printed circuit board by AerodyneLabs, from the AerodyneLabs/Hyperion repository on GitHub. It is a 4-layer board of 90.2 × 95.9 mm with 72 parts on 53 nets.
It is built around the STM32F407ZET6, SN65HVD233D and FT2232HL, with the FDC6561AN among its other parts. Its parts include 39 capacitors, 14 resistors, 5 ICs, 3 crystals and 2 diodes. It belongs with the computers and single-board computers boards and the STM32 boards of this library.
Main components
4
STM32F407ZET6
LQFP-144(20x20)-40℃~+85℃ 1.8V~3.6V 114 12bit 12bit 168MHz 192KB 32 Bit 512KB ARM Cortex-M4 Built-in FLASH LQFP-144(20x20) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
SN65HVD233D
SOIC-8-40℃~+125℃ 1 1Mbps 200uA 3.3V 6mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN Transceivers
FT2232HL
QFP64Dual High Speed USB to Multipurpose UART/FIFO ICFTDIUncategorised
FDC6561AN
SOT-23-6-55℃~+150℃ 1.2W 1.5V 170pF 2 N-Channel 23pF 30V 35mΩ@10V 35pF 4A 4nC@10V SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
README
README.mdHyperion
Hardware and firmware for the Hyperion motherboard. Compatible with CubeSat kit standard.
Parts
72| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 0.1uF | CAPC1005-N | C2, C10, C12, C13, C15, C16, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28 +11 |
| 8 | 10k | RESC1005-N | R4, R5, R6, R8, R9, R10, R12, R13 |
| 6 | 10pF | CAPC1005-N | C11, C14, C33, C34, C35, C36 |
| 4 | 3.3uF | CAPC1005-N | C1, C3, C6, C32 |
| 2 | 12MHz | XTAL-4SMD-32X25 | X1, X2 |
| 2 | 2.2uF | CAPC1005-N | C17, C18 |
| 2 | 600 | INDC1005-N | FB1, FB2 |
| 2 | MOV | RESC1005-N | R1, R2 |
| 2 | TVS | CAPC1005-N | D1, D2 |
| 1 | 0.02 | RESC3216-N | R11 |
| 1 | 120 | RESC1005-N | R14 |
| 1 | 12k | RESC1005-N | R3 |
| 1 | 2.2k | RESC1005-N | R7 |
| 1 | 32.768kHz | XTAL-2SMD-32x15 | X3 |
| 1 | 93LC46/OT | SOT95P280-6N | U2 |
| 1 | CONN-DC | CONN-DC-CUI-202 | J2 |
| 1 | CUBESAT-BUS | CUBESAT-BUS | H1 |
| 1 | FDC6561 | SOT95P280-6N | Q2 |
| 1 | FERRITE | INDC1005-N | FB3 |
| 1 | FT2232H | QFP50P1200X1200-64N | U1 |
| 1 | LTC4361-T | SOT65P280-8N | U3 |
| 1 | MOSFET-P | SOT65P210-DDGSDD-N | Q1 |
| 1 | PTC | RESC3216-N | TH1 |
| 1 | SN65HVD233 | SOIC127P600-8N | U5 |
| 1 | STM32F407ZE | QFP50P2200X2200-144N | U4 |
| 1 | USB | CONN-USB-MICRO-B-FCI | J1 |
Questions
How big is the Hyperion PCB?
It measures 90.2 × 95.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Hyperion use?
72 parts, built around the STM32F407ZET6, SN65HVD233D, FT2232HL and FDC6561AN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hyperion KiCad files?
From the AerodyneLabs/Hyperion repository on GitHub, at the commit this page was made from: the board is Hardware/Hyperion.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hyperion design in my own project?
Its repository states no licence, so its author keeps all rights: ask AerodyneLabs before reusing the design.
Similar boards
- 2 layers124.5 × 109.5 mm
- 4 layers100 × 41.4 mm
Station analyse qualite eau
savoirs-vivants/station-analyse-qualite-eau
Station d'analyse de la qualité de l'eau. Dépôt contenant le hardware et le firmware.
113 parts - 4 layers47.5 × 62 mm
- 2 layers50 × 61 mm
ENP KIT-232-485-CAN
Enapter/ucm-kit-open-hardware
Enapter UCM Kit – open hardware for connecting your energy devices.
32 parts4 - 2 layers170.6 × 121.1 mm
- 2 layers55.9 × 49.5 mm
TyphoonMotherboard rev1 KiCad
hpvdt/typhoon_motherboard
Folder for each of the boards designed for a given project, even if there is only one board for a given project.
75 parts1 - 2 layers94 × 100.6 mm
