2 layers65 × 30 mm
2 layers124.5 × 109.5 mm
Gate Controller
d0n13/automationHomebridge accessories
- Size
- 124.5 × 109.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 75
- Pads
- 236
- Tracks, vias
- 416, 90
- Pours
- 13
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 25 Mar 2023
- Updated
- 28 Sep 2025
Overview
Gate Controller is an open-source printed circuit board by d0n13, from the d0n13/automation repository on GitHub, published under the MIT licence. It is a 2-layer board of 124.5 × 109.5 mm with 52 parts on 75 nets, routed with 416 tracks and 90 vias.
It is built around the FDC6561AN, EC2-5SNU and STD40NF10. Its parts include 17 connectors, 10 resistors, 3 transistors, 2 ICs and 2 switches.
Main components
3
FDC6561AN
SOT-23-6-55℃~+150℃ 1.2W 1.5V 170pF 2 N-Channel 23pF 30V 35mΩ@10V 35pF 4A 4nC@10V SOT-23-6 MOSFETs ROHSTECH PUBLICMOSFETs
EC2-5SNU
DIP,7.5x15mm-40℃~+85℃ 15mm 1ms 2 Form C: 2C (DPDT-CO) 220V@DC、250V@AC 2A 2ms 5V 7.5mm 9.4mm Silver Alloy Single Coil DIP,7.5x15mm Signal Relays ROHSKEMETMagnetic Latching Relays
STD40NF10
DPAK-55℃~+175℃ 1 N-channel 100V 125W 2.18nF 28mΩ@10V 50A 83.7pF DPAK MOSFETs ROHSSTMicroelectronicsMOSFETs
README
README.mdautomation
Homebridge accessories
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | M3.2 | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | MK1, MK2, MK3, MK4, MK5, MK6, MK7, MK8, MK9, MK10, MK11, MK12 |
| 6 | 10k | Resistor_SMD:R_1206_3216Metric | R3, R4, R5, R6, R7, R8 |
| 4 | LOGO | OneTouch_Logo:onetouchlogo | G1, G2, G3, G4 |
| 4 | RJ45_Shielded | Connector_RJ:RJ45_Amphenol_RJHSE5380 | J5, J6, J16, J17 |
| 3 | FDC6561AN | FDC6561AN:SSOT-6 | Q1, Q2, Q3 |
| 2 | 1.8K | Resistor_SMD:R_1206_3216Metric | R9, R10 |
| 2 | AUX | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J8, J11 |
| 1 | 0.1uF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 15K | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | AUX | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal | J7 |
| 1 | CN1 | Connector:Gate_Connector_2022 | J4 |
| 1 | CN7 | Connector_JST:JST_EH_S2B-EH_1x02_P2.50mm_Horizontal | J3 |
| 1 | Driveway lights | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J14 |
| 1 | EC2-5SNU | Relay_THT:Relay_DPDT_Kemet_EC2 | K1 |
| 1 | Ethernet | Connector_RJ:RJ45_Amphenol_RJHSE5380 | J18 |
| 1 | Fiber Power | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J13 |
| 1 | MCP23009-E_SS | MCP23009_E_SS:SOP65P780X200-20N | IC1 |
| 1 | POE Camera | Connector_RJ:RJ45_Amphenol_RJHSE5380 | J15 |
| 1 | Pi | Connector_JST:JST_XH_S8B-XH-A_1x08_P2.50mm_Horizontal | J20 |
| 1 | Post | Connector_JST:JST_XH_S8B-XH-A_1x08_P2.50mm_Horizontal | J22 |
| 1 | Power | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J12 |
| 1 | START | Button_Switch_THT:TS-D015 | SW1 |
| 1 | STD40NF10 | STD40NF10:D_PAK | T1 |
| 1 | pi | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical_SMD | P1 |
| 1 | ~ | Logos:QRCode Github Automation | U2 |
Questions
How big is the Gate Controller PCB?
It measures 124.5 × 109.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Gate Controller use?
52 parts, built around the FDC6561AN, EC2-5SNU and STD40NF10. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Gate Controller KiCad files?
From the d0n13/automation repository on GitHub, at the commit this page was made from: the board is pcb/gate/Gate Controller/Gate Controller.kicad_pcb and its schematic pcb/Driveway lights/1-Wire-output+sensor/1-wire-driveway/1-wire-driveway.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Gate Controller design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from d0n13/automation
6- 2 layers65 × 30 mm
- 2 layers29.5 × 27.5 mm
- 2 layers58.4 × 44.5 mm
- 2 layers29.5 × 28.7 mm
- 2 layers26.7 × 19.6 mm
Similar boards
- 6 layers65 × 50.5 mm
- 4 layers85 × 85 mm
Hv pulse controller
wenzel-lab/high-voltage-pulse-generator
Custom electronics solution for microfluidic droplet sorting pulses
117 parts3 - 4 layers90.2 × 95.9 mm
- 4 layers100 × 41.4 mm
Station analyse qualite eau
savoirs-vivants/station-analyse-qualite-eau
Station d'analyse de la qualité de l'eau. Dépôt contenant le hardware et le firmware.
113 parts - 2 layers41.4 × 47.5 mm
U2f zero panel
conorpp/u2f-zero
U2F USB token optimized for physical security, affordability, and style
52 parts2.4k - 2 layers136 × 130 mm
Lora nodemcu
sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.
52 parts1.1k - 2 layers69 × 53.8 mm
TUSS4470 shield
Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.
52 parts530 - 2 layers52.5 × 36.6 mm
ESP8266-WebRadio
karawin/Ka-Radio
A wifi webradio with only low cost boards ESP8266 and VS1053 by Jp Cocatrix
52 parts453