

Artanis
- Size
- 154.5 × 101 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 111
- Nets
- 90
- Pads
- 533
- Tracks, vias
- 261, 39
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Sep 2019
- Updated
- 6 Nov 2019
Overview
Artanis is an open-source printed circuit board by aep, from the aep/artanis-hw repository on GitHub. It is a 2-layer board of 154.5 × 101 mm with 111 parts on 90 nets, routed with 261 tracks and 39 vias.
It is built around the TCAN332D, R-78E3.3-1.0 and MCP602-I/P, with the MMA8452QT, SZNUP2105L and ACM70V-701-2PL-TL00 among its other parts. Its parts include 28 capacitors, 28 resistors, 12 ICs, 8 diodes and 6 connectors.
Main components
6TCAN332D
SOIC-8-40℃~+125℃ 1Mbps 3V~3.6V 60mA CAN Transceiver SOIC-8 CAN Transceivers ROHSTexas InstrumentsCAN TransceiversR-78E3.3-1.0
SIP,11.6x7.5mm-40℃~+85℃ 1 10.2mm 11.6mm 1A 2200uF 3.3V 300uA 50mVp-p 6V~36V 7.5mm 850kHz 90% Short Circuit Protection、Automatic fault recovery Step-down type ±3% SIP,11.6x7.5mm DC-DC Power Modules ROHSYLPTECDC-DC Power ModulesMCP602-I/P
PDIP-8-40℃~+85℃ 1pA 1pA 2 2.3V/us 2.5uV/℃ 2.7V~6V 2.8MHz 22mA 230uA 29nV/√Hz@1kHz 700uV 90dB Built-in compensation、ESD protection Rail-to-rail output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierMMA8452QT
QFN-16(3x3)Attitude Sensor/GyroscopeNXP SemiconductorsSZNUP2105L
SOT-23100nA 2 24V 30pF 32V 350W@8/20us 44V 8A@8/20us Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23 ESD and Surge Protection (TVS/ESD) ROHSonsemiESD And Surge Protection (TVS/ESD)ACM70V-701-2PL-TL00
SMD-4P,7x6mm-40℃~+125℃ 10MΩ 15mΩ 2 4A 700Ω@100MHz 80V SMD-4P,7x6mm Common Mode Filters ROHSTDKCommon Mode Filters
Parts
111| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 56pf | Capacitor_SMD:C_0603_1608Metric | C3, C4, C5, C6, C7, C11, C14, C15 |
| 6 | 22K | Resistors:0603 | R8, R9, R18, R19, R20, R24 |
| 5 | R | Resistor_SMD:R_0603_1608Metric | R21, R22, R26, R32, R33 |
| 5 | SA0 | OLIMEX_TestPoints-FP:TP_SMD | TP1, TP2, TP3, TP4, TP5 |
| 4 | 33pf | Capacitor_SMD:C_0603_1608Metric | C1, C2, C12, C13 |
| 4 | Battery | Batteries:BATTERY-AAA | BT1, BT1, BT2, BT2 |
| 4 | Fuse | Fuse:Fuse_1206_3216Metric | F1, F2, F3, F4 |
| 3 | 100nF 50V | Capacitors:0603 | C8, C16, C17 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R12, R30, R31 |
| 3 | 1K | Resistor_SMD:R_0603_1608Metric | R11, R28, R29 |
| 3 | 33pF | Capacitors:0603 | C22, C23, C24 |
| 3 | 45 | Resistors:0603 | R5, R6, R7 |
| 3 | Omron G3VM-61VY3 | Package_SO:SOP-4_3.8x4.1mm_P2.54mm | U9, U14, U15 |
| 3 | Q_NPN_BEC | Silicon-Standard:SOT23-3 | Q1, Q3, Q5 |
| 3 | SMA_F_R_A_PCB | Connector_Coaxial:SMA_Amphenol_132203-12_Horizontal | EXT_ANT1, EXT_ANT2, EXT_ANT5 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C28, C29 |
| 2 | 100uF 50V | Capacitors:CPOL-RADIAL-2.5MM-6.5MM | C9, C18 |
| 2 | 120 DO NOT POPULATE | Resistor_SMD:R_0603_1608Metric | R2, R4 |
| 2 | 1K-10K | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | 2.2uF | Capacitors:0603 | C19, C20 |
| 2 | 3.6K | Resistors:0603 | R10, R17 |
| 2 | 4.3K | Resistors:0603 | R23, R25 |
| 2 | Fiducial | Aesthetics:FIDUCIAL-1X2 | FID1, FID2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric | D6, D10 |
| 2 | M8AIG-16-12-2T3 | Crystal:Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm | Y1, Y2 |
| 2 | MCP2515-QFN | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias | U1, U2 |
| 2 | PE-1210ACC110STS 11UH | aep:PE-1210ACC | L1, L2 |
| 2 | SMA_F_R_A_PCB | Connector_Coaxial:U.FL_Molex_MCRF_73412-0110_Vertical | EXT_ANT3, EXT_ANT4 |
| 2 | SZNUP2105L | Package_TO_SOT_SMD:SOT-23 | D1, D3 |
| 2 | TCAN332 | Package_TO_SOT_SMD:SOT-23-8 | U4, U5 |
| 1 | 100nF | Capacitors:0603 | C25 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C26 |
| 1 | 2.2uF 50V | Capacitors:0603 | C10 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C27 |
| 1 | ACM70V-701-2PL-TL00 | aep:ACM70V | FL1 |
| 1 | ADS1015 | Silicon-Standard:MSOP10 | U10 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x02_Top_Bottom | Connector_Molex:Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal | J5 |
| 1 | Conn_02x02_Top_Bottom | Connector_Molex:Molex_Nano-Fit_105314-xx12_2x06_P2.50mm_Horizontal | J6 |
| 1 | D | Diode_SMD:D_0603_1608Metric | D8 |
| 1 | MCP602 | OLIMEX_IC-FP:SOIC-8 | U6 |
| 1 | MMA8452Q | Silicon-Custom:QFN-16 | U7 |
| 1 | MSATA-PCIE_MINI-CARD-MM60-52B1-G1-R850(Digi-Key_PN_670-2516-2-ND) | OLIMEX_Connectors-FP:MM60-52B1-G1-R850 | CON1 |
| 1 | Omega2S | Module:Onion_Omega2S | U8 |
| 1 | Q_PMOS_GSD | aep:TSMT3 | Q4 |
| 1 | R-78E3.3-1.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U3 |
| 1 | SMBJ16CA-13-F | Diode_SMD:D_SMB | D2 |
| 1 | Screw_Terminal internal keyfob | Connectors:SCREWTERMINAL-3.5MM-4 | J4 |
| 1 | TVS 14V | Diode_SMD:D_SOD-523 | D5 |
| 1 | TVS 3.3V | Diode_SMD:D_SOD-523 | D4 |
| 1 | simcard | aep:nanosim-Wurth-693043020611 | J2 |
More from aep/artanis-hw
2- 4 layers74.5 × 120 mm

- 4 layers74.6 × 120 mm

Similar boards
- 4 layers50.5 × 80 mm

- 2 layers126 × 107 mm

- 4 layers67.6 × 58.3 mm

- 4 layers100 × 90 mm

- 4 layers70 × 80 mm

- 2 layers291 × 81 mm

Motherboard
borzeman/PzbElectronics
Репозиторий для поддержки версионирования при разработке плат для киоска.
118 parts - 2 layers39.6 × 99.1 mm

ESP32-Eurorack Audio
ctag-fh-kiel/ctag-tbd
CTAG TBD >>to be determined<< an extendible open source Eurorack sound module
128 parts260 - 4 layers100 × 100 mm

ESP32-Eurorack Audio
ctag-fh-kiel/esp32-eurorack-audio
Open source eurorack audio module based on ESP32
173 parts71
Questions
How big is the Artanis PCB?
It measures 154.5 × 101 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Artanis use?
111 parts, built around the TCAN332D, R-78E3.3-1.0, MCP602-I/P and MMA8452QT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Artanis KiCad files?
From the aep/artanis-hw repository on GitHub, at the commit this page was made from: the board is base/artanis.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Artanis design in my own project?
Its repository states no licence, so its author keeps all rights: ask aep before reusing the design.