
Colordance brain
ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.

An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.
Interface brain is an open-source printed circuit board by ademuri, from the ademuri/colordance-circle repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 154.5 × 105 mm with 174 parts on 116 nets, routed with 726 tracks and 220 vias.
It is built around the SN74ACT244PWRE4, ISL83490IBZ-T and AP3211KTR-G1, with the PPPC241LFBN-RC, 69167-103HLF and 76384-302LF among its other parts. Its parts include 61 capacitors, 54 resistors, 40 connectors, 9 diodes and 5 ICs. It belongs with the interfaces and adapters boards and the NXP (LPC, Kinetis, i.MX RT) boards of this library.
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.
"This is not an officially supported Google product"
This project uses two build systems, PlatformIO and CMake. PIO is for code which runs on embedded devices - these run the actual hardware. CMake is for running tests on standard PCs.
To build with PlatformIO, run pio run -e <env>, where <env> is one defined
in platformio.ini (e.g. teensy).
To run the tests:
mkdir -p build
cd build
cmake .. -DBUILD_SIMULATOR=false
make && ./generictestThe simulator uses SDL2 to render the LEDs. To build it, first install the SDL2 development library
sudo apt install libsdl2-dev
then, from the build directory, configure CMake to build it with
cmake .. -DBUILD_SIMULATOR=true
then build and run it with
make && ./lib/simulator/Simulator
To run the simulator with the Processing controller, from the build directory run:
${PROCESSING_HOME?}/processing-java --sketch=../controller/processing_controller --run | ./lib/simulator/Simulator| Qty | Value | Footprint | References |
|---|---|---|---|
| 39 | 100nF | Capacitor_SMD:C_0402_1005Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C23 +23 |
| 24 | Conn_01x03 | Homebrew:MiniPV_69167-X03XXX_1x03_P2.54mm_Polarized_Vertical | J2, J3, J10, J11, J12, J13, J14, J15, J16, J17, J22, J23, J24, J25, J30, J31 +8 |
| 22 | 1k | Resistor_SMD:R_0603_1608Metric | R26, R27, R28, R29, R30, R31, R32, R33, R38, R39, R40, R41, R42, R43, R44, R45 +6 |
| 16 | 33 | Resistor_SMD:R_0603_1608Metric | R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24 |
| 14 | 22nF | Capacitor_SMD:C_0402_1005Metric | C24, C25, C26, C27, C36, C37, C38, C39, C44, C45, C46, C47, C52, C53 |
| 14 | Conn_01x02 | Homebrew:MiniPV_76384-X02XX_1x02_P2.54mm_Vertical | J18, J19, J20, J21, J26, J27, J28, J29, J34, J35, J36, J37, J38, J39 |
| 8 | DNP | Resistor_SMD:R_0603_1608Metric | R34, R35, R36, R37, R50, R51, R52, R53 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4, R25 |
| 4 | D_TVS_DATA | Diode_SMD:D_SMB | D3, D4, D5, D7 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 3 | 10uF | Capacitor_SMD:C_0805_2012Metric | C6, C59, C61 |
| 2 | 470uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C5, C56 |
| 2 | SN74ACT244PWR | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1, U2 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric | C7 |
| 1 | 11.5k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 120 | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 1nF | Capacitor_SMD:C_0402_1005Metric | C57 |
| 1 | 2.21k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 22uF | Capacitor_SMD:C_1206_3216Metric | C54 |
| 1 | 5.6uH | Inductor_SMD:L_Taiyo-Yuden_NR-60xx | L1 |
| 1 | AP3211 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | Anderson | Homebrew:Anderson_1336G1_right_angle_bottom_two | J1 |
| 1 | D | Diode_SMD:D_SMA | D9 |
| 1 | D_TVS_12V | Diode_SMD:D_SMB | D1 |
| 1 | D_TVS_5V | Diode_SMD:D_SMB | D8 |
| 1 | ISL83490 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | LED | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | RJ45 | Connector_RJ:RJ45_Amphenol_54602-x08_Horizontal | J40 |
| 1 | SCHOTTKY | Diode_SMD:D_SMA | D2 |
| 1 | Teensy4.1 | Homebrew:Teensy41_stripped | U3 |

ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.

ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.

ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.

ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.

ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.

ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.

ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.

ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.

Tinkerbug-Robotics/TinkerRocket
Model rocket flight computer, ground station, iOS app, and simulation

thewonderidiot/lachesis
Portable, safe readers for Apollo Guidance Computer core rope memory modules

msoe-vex/pcb-design
This repository is dedicated to storing files required for designing and creating PCB Boards

thewonderidiot/cdu
Tools for reverse-engineering, simulating, and interfacing with the Coupling Data Unit (CDU), one of Apollo's most infamous boxes



SimonDaniel605/Hydrogel-3D-Printer
Development of a custom hydrogel 3D printer for tissue engineering and research applications for Stellenbosch University.

It measures 154.5 × 105 mm and has 2 copper layers, 1.6 mm thick.
174 parts, built around the SN74ACT244PWRE4, ISL83490IBZ-T, AP3211KTR-G1 and PPPC241LFBN-RC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ademuri/colordance-circle repository on GitHub, at the commit this page was made from: the board is hardware/interface-brain/interface-brain.kicad_pcb and its schematic hardware/buttons/button-holder/button-holder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).