

Data Logger 2
Not finished, just a backup to date
- Size
- 70 × 85.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 137
- Pads
- 487
- Tracks, vias
- 589, 103
- Pours
- 15
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Jun 2025
- Updated
- 26 Jun 2025
Overview
Data Logger 2 is an open-source printed circuit board by jet1971, from the jet1971/logger_2_kicad repository on GitHub. It is a 4-layer board of 70 × 85.9 mm with 120 parts on 137 nets, routed with 589 tracks and 103 vias.
It is built around the ESP32-C3-MINI-1U-N4, ESP32-WROOM-32D and MAX3232EIPWRQ1, with the AP3211KTR-G1, TC4432EOA and ADS1015IDGS among its other parts. Its parts include 49 capacitors, 38 resistors, 10 ICs, 9 diodes and 2 inductors. It belongs with the sensors and measurement boards and the ESP32 and RISC-V boards of this library.
Main components
12ESP32-C3-MINI-1U-N4
SMD,13.2x12.5mm-104dBm -40℃~+85℃ 2.4GHz 20.5dBm 350mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3FN4 UART、SPI、I2C、I2S、USB SMD,13.2x12.5mm WiFi Modules ROHSEspressif SystemsWiFi ModulesESP32-WROOM-32D
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesMAX3232EIPWRQ1
TSSOP-16-40℃~+85℃ 0.3mA 2 2 250Kbps 3V~5.5V Transceiver Yes ±15kV TSSOP-16 RS232 ICs ROHSTexas InstrumentsRS232 ICsAP3211KTR-G1
SOT-23-6-40℃~+85℃ 1 1.1mA 1.4MHz 1.5A 4.5V~18V 810mV~15V Adjustable Buck Buck Built-in SOT-23-6 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersTC4432EOA
SOIC-8-40℃~+150℃ 1 1.5A 25ns 33ns 3A 4.5V~30V Low Side、High Side MOSFET Under Voltage Protection SOIC-8 Gate Drivers ROHSMicrochip TechnologyGate DriversADS1015IDGS
VSSOP-10-0.5mm-40℃~+125℃ 0.5LSB 12 128Hz、250Hz、490Hz、920Hz、1.6kHz、2.4kHz、3.3kHz 1MHz 2 2V~5.5V 2uA 3.3kHz 5ppm/℃ 6.144V Built-in Built-in I2C Sigma-Delta Support Yes VSSOP-10-0.5mm Analog to Digital Converters (ADC) ROHSTexas InstrumentsAnalog To Digital Converters (ADC)CY15B104Q-PZXI
DFN-8-EP(5x6)DFN-8-EP(5x6) FRAM ROHSInfineon TechnologiesFRAMUS1M
SMA-55℃~+150℃ 1 Independent 1.65V@1A 1A 1kV 30A 5uA@1kV 75ns SMA Fast Recovery / High Efficiency Diodes ROHSMDDFast Recovery / High Efficiency DiodesB130-13-F(MS)
SMASchottky DiodesMSKSEMIFDD4685
DPAK(TO-252)-55℃~+150℃ 1 P-Channel 2.38nF 35mΩ@4.5V 3V 40A 40V 69W P-Channel DPAK(TO-252) MOSFETs ROHSonsemiMOSFETsMX23A26NF1
插件Automotive Connector Socket 插件 Automobile Connectors ROHSJAE ElectronicsAutomobile ConnectorsPESD3V3X1BL,315(ES)
DFN1006-2LDFN1006-2L ESD and Surge Protection (TVS/ESD) ROHSElecSuperUncategorised
README
README.mdlogger_2_kicad
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C7, C8, C9, C13, C14, C15, C19, C20, C26, C32, C34 |
| 8 | 0.22uF | Capacitor_SMD:C_0805_2012Metric | C10, C11, C12, C16, C17, C18, C21, C22 |
| 8 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C5, C6, C36, C40, C42, C44 |
| 8 | 470R | Resistor_SMD:R_0805_2012Metric | R12, R13, R14, R21, R22, R23, R26, R27 |
| 5 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C45, C46, C47, C48, C49 |
| 5 | 3.3k | Resistor_SMD:R_0805_2012Metric | R6, R8, R15, R17, R19 |
| 5 | 6.8k | Resistor_SMD:R_0805_2012Metric | R7, R9, R16, R18, R20 |
| 3 | 10uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C39, C41 |
| 2 | 1.1k | Resistor_SMD:R_0805_2012Metric | R24, R25 |
| 2 | 10K | Capacitor_SMD:C_0603_1608Metric | R32, R33 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | r1, R34 |
| 2 | 10uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C25, C27 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28, C43 |
| 2 | 22uF | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C23, C30 |
| 2 | 4.7k | Capacitor_SMD:C_0603_1608Metric | r4, r5 |
| 2 | 60 | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | ADS1015IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | ADS1, ADS2 |
| 2 | CY15B104Q-PZXI | KiCad:DIP794W56P254L978H457Q8N | IC1, IC2 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 2 | Polyfuse | Fuse:Fuse_1812_4532Metric | F1, F2 |
| 2 | US1M | Diode_SMD:D_SMA | D7, D9 |
| 1 | 0.33uF | Capacitor_SMD:C_0805_2012Metric | C31 |
| 1 | 100K | Resistor_SMD:R_0805_2012Metric | R28 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R37 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C38 |
| 1 | 10k | Resistor_SMD:R_0805_2012Metric | R10 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C29 |
| 1 | 10uF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C24 |
| 1 | 10uf | Capacitor_SMD:C_0603_1608Metric | C37 |
| 1 | 16.3K | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R38 |
| 1 | 1K 1 WATT | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R35 |
| 1 | 1SMB5919BT3G_Zenner | Diode_SMD:D_SMB | D6 |
| 1 | 27K | Resistor_SMD:R_0805_2012Metric | R29 |
| 1 | 3.3v_Zenner | Diode_SMD:D_SOD-123 | D8 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R36 |
| 1 | 470uF | Capacitor_SMD:C_Elec_6.3x5.8 | C4 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B | C35 |
| 1 | 47uF, 6.3v | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C33 |
| 1 | 49.9K | Resistor_SMD:R_0805_2012Metric | R30 |
| 1 | AP3211KTR-G1 | AP3211KTR:SOT23-6_DIO | U3 |
| 1 | B130-13-F | Diode_SMD:D_SMA | D4 |
| 1 | CMPSH-3CE TR PBFREE | CMPSH-3CE TR PBFREE:CMPSH-3CE TR PBFREE_CNS | CR1 |
| 1 | D | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D5 |
| 1 | DIY_EFI_WB | Library:Diy_EFI_WB | CUSTOM1 |
| 1 | D_Zener | Diode_SMD:D_SOD-323 | D3 |
| 1 | ESP32-C3-MINI-1U-N4 | ESP32-C3-MINI-1U-N4:XCVR_ESP32-C3-MINI-1U-N4 | U5 |
| 1 | ESP32-WROOM-32D | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | FDD4685 | FDD4685:TO252_FDD_ONS | Q1 |
| 1 | H11L1S-M | H11L1S:SOIC_1L1S-M_ONS | U6 |
| 1 | LM2940S-5.0/NOPB | Package_TO_SOT_SMD:TO-263-3_TabPin2 | U4 |
| 1 | MAX3232EIPWR | MAX3232EIPWR:SOP65P640X120-16N | U7 |
| 1 | MX23A26NF1 | MX23A26NF1:CONN26_3A26NF1_JAE | J1 |
| 1 | PESD3V3X1BL_315 | PESD3V3X1BL,315:RTVS_DFN1006-2_SOD882_NEX | CR3 |
| 1 | SMBJ15CA | SMBJ15CA_Download:DIODE_DO214AA-L | CR2 |
| 1 | SP720 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | SPM6530T-220M-HZ | SPM6530T-220M-HZ:DIODE_DO214AA-L | L1 |
| 1 | SRP5015TA-4R7M | SRP5015TA-4R7M:IND_SRP5015TA_BRN | L2 |
| 1 | TC2030-IDC | TC2030-IDC:TC2030-IDC | TC1 |
| 1 | TC2030-IDC | TC2030-IDC:TC2030-IDC-NL | TC2 |
| 1 | TC4432EOA | TC4432EOA:SOIC127P600X175-8N | IC3 |
Similar boards
- 2 layers99.1 × 89.8 mm

- 2 layers77 × 80 mm

- 2 layers67.5 × 67.5 mm

PMOD1
Zalmotek/renesas-ams-osram-pmod1
The evaluation kit contains the following sensors from AMS-Osram: TMF8828 (a direct time-of-flight (dToF) sensor), AS 7331 (a low-power, low noise integrated UV sensor), AS 7343 (a 14-channel highly versatile…
48 parts3 - 4 layers
.kicad_pcb.jpg?size=s&soon)
3CH AWG TIA v103 (Copy)
GrandFatherPikhto/3CH-AWG-TIA
3 Channels AWG Tia Generator on 10CL006, AD9707, ADA4807-2
338 parts - 2 layers154.5 × 105 mm

Interface brain
ademuri/colordance-circle
An art project that uses arrays of colored lights around a circle to create kaleidoscopic colored shadows.
174 parts4Apache-2.0 - 2 layers150 × 120 mm

HydrogelBioprinter
SimonDaniel605/Hydrogel-3D-Printer
Development of a custom hydrogel 3D printer for tissue engineering and research applications for Stellenbosch University.
174 partsMIT - 2 layers190.5 × 190.5 mm

- 2 layers79.2 × 68.8 mm

Environment slave
pcbcupid/Lora-Wireless-Sensor-Network
A wireless sensor network based on Lora and esp32C3. This repo will help you build a complete product from scratch to finish!
72 parts30MIT
Questions
How big is the Data Logger 2 PCB?
It measures 70 × 85.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Data Logger 2 use?
120 parts, built around the ESP32-C3-MINI-1U-N4, ESP32-WROOM-32D, MAX3232EIPWRQ1 and AP3211KTR-G1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Data Logger 2 KiCad files?
From the jet1971/logger_2_kicad repository on GitHub, at the commit this page was made from: the board is Data Logger 2.kicad_pcb and its schematic ADC's.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Data Logger 2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask jet1971 before reusing the design.