

Jukebox io
Burning Man Math Camp Synthesizers
- Size
- 60.6 × 108 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 153
- Nets
- 170
- Pads
- 678
- Tracks, vias
- 1,385, 133
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Aug 2022
- Updated
- 29 Oct 2026
Overview
Jukebox io is an open-source printed circuit board by adeboni, from the adeboni/math-camp-synth repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 60.6 × 108 mm with 153 parts on 170 nets, routed with 1,385 tracks and 133 vias.
It is built around the RP2040, R-783.3-1.0 and R-785.0-1.0, with the MAX7313AEG+, W25Q128JVSIQ and W5500 among its other parts. Its parts include 77 resistors, 37 capacitors, 10 connectors, 9 transistors and 8 ICs. It belongs with the RP2040 boards of this library.
Main components
10RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)R-783.3-1.0
SIP,11.5x7.5mm1 1A 3.3V 3W 4.75V~18V 90% SIP,11.5x7.5mm Isolated Power Modules ROHSRECOM PowerIsolated Power ModulesR-785.0-1.0
SIP-31 1A 5V 5W 6.5V~18V 94% SIP-3 Isolated Power Modules ROHSRECOM PowerIsolated Power ModulesMAX7313AEG+
SSOP-24-150mil-40℃~+125℃ 16 2V~3.6V 400kHz Cascading and address extension、Built-in LED driver、PWMOptocouplers I2C Interrupt Output SSOP-24-150mil I/O Expanders ROHSMaxim Integrated (Analog Devices)I/O ExpandersW25Q128JVSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 120ms@(32KB) 128Mbit 133MHz 1uA 2.7V~3.6V 20 Years 3ms Power-on reset、Hardware write protection、Software write protection、Write enable latch、Absolute write protection SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHW5500
LQFP-48_7x7-40℃~+85℃ 10BASE-T、100BASE-TX 3.3V 32KB SPI SPI Wake-up function、Programmable LED indication、Low-power mode Yes LQFP-48(7x7) Ethernet Controllers ROHSWIZNETEthernet ControllersBSS138
SOT-23-55℃~+150℃ 1 N-channel 1.1Ω@10V、1.2Ω@4.5V 1.2V 1.7nC@10V 17.5pF 340mA 350mW 50V 6.5pF N-Channel SOT-23 MOSFETs ROHShongjiachengMOSFETsMMBT2222
SOT-231 NPN 1uA 300mV 300mW 400 40V 600mA 6V NPN SOT-23 Bipolar (BJT) ROHSYONGYUTAIBipolar (BJT)SI-46001-F
RJ45-THRJ45-TH Ethernet Connectors / Modular Connectors (RJ45 RJ11) ROHSBel FuseEthernet Connectors / Modular Connectors (RJ45 RJ11)SM4007
MELFMELF Diodes - General Purpose ROHSYONGYUTAIDiodes - General Purpose
README
README.mdBurning Man Math Camp Synths
2022: Pendulum
2023: Jukebox
Parts
153| Qty | Value | Footprint | References |
|---|---|---|---|
| 38 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R24, R25, R26, R27, R28, R29, R30, R31, R32, R33, R34, R35, R36, R37 +22 |
| 21 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C29, C42 +5 |
| 17 | 10k | Resistor_SMD:R_0603_1608Metric | R5, R9, R11, R64, R65, R66, R67, R70, R71, R72, R73, R87, R88, R89, R90, R98 +1 |
| 7 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q3, Q4, Q5, Q6, Q7, Q8, Q9 |
| 5 | 10u | Capacitor_SMD:C_0603_1608Metric | C22, C28, C34, C35, C36 |
| 5 | 1k | Resistor_SMD:R_0603_1608Metric | R17, R22, R23, R50, R51 |
| 4 | 4.7 | Resistor_SMD:R_0603_1608Metric | R6, R7, R8, R10 |
| 4 | 49.9 | Resistor_SMD:R_0603_1608Metric | R12, R13, R14, R15 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | MAX7313 | Package_DFN_QFN:TQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U1, U6, U7 |
| 2 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV3 |
| 2 | 10n | Capacitor_SMD:C_0603_1608Metric | C25, C30 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric | R46, R47 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric | C24, C26 |
| 2 | 27 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 27p | Capacitor_SMD:C_0603_1608Metric | C23, C27 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R18, R19 |
| 2 | 6.8n | Capacitor_SMD:C_0603_1608Metric | C31, C33 |
| 2 | MMBT2222 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 2 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1, SW2 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x5.4 | C32 |
| 1 | 12.4k | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 25MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J11 |
| 1 | Conn_02x12_Odd_Even | Connector_IDC:IDC-Header_2x12_P2.54mm_Vertical | J2 |
| 1 | DISPLAY_1 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J13 |
| 1 | DISPLAY_2 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J14 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | HEAD_LEDS | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J18 |
| 1 | MOUTH_LEDS | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J12 |
| 1 | R-783.3-1.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U4 |
| 1 | R-785.0-1.0 | Converter_DCDC:Converter_DCDC_RECOM_R-78E-0.5_THT | U8 |
| 1 | ROTARY_SWITCH | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J17 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U2 |
| 1 | SI-46001-F | footprints:BEL_SI-46001-F | J10 |
| 1 | SM4007 | Diode_SMD:D_SOD-123 | D1 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_Palconn_UTC16-G | J5 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.23x5.23mm_P1.27mm | U5 |
| 1 | W5500 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U3 |
More from adeboni/math-camp-synth
12- 2 layers280 × 65 mm

- 2 layers280 × 65 mm

- 2 layers100 × 100 mm

- 2 layers70.8 × 108 mm

- 4 layers50.5 × 100 mm

- 2 layers100 × 100 mm

- 2 layers40.3 × 108 mm

- 2 layers40.3 × 100 mm

- 4 layers68.6 × 53.3 mm

- 2 layers100 × 100 mm

- 2 layers30.1 × 18.3 mm

- 2 layers19.7 × 99.7 mm

Similar boards
- 2 layers30 × 109 mm

Laser controller
adeboni/eurorack
This repository stores various eurorack module designs I've made
124 parts1GPL-3.0 - 6 layers120.5 × 72.9 mm

- 2 layers148.6 × 24.1 mm

- 2 layers85 × 27 mm

MAX7313 port expander
eta-systems/MAX7313-breakout
Breakout Board for MAX7313 16 Channel Port Expander with 4 bit PWM
50 parts1 - 2 layers132 × 132 mm

- 2 layers116.3 × 114.5 mm

- 2 layers174 × 111 mm

Pedalboard hw
pedalboard/pedalboard-hw
pedalboard audio midi processor open hardware
169 parts14CERN-OHL-P-2.0 - 2 layers99.1 × 99 mm

XDuinoRail Debug
chatelao/xDuinoRail-Decoder
The friendly decoder development plattform for model railroad tinkers.
170 partsAGPL-3.0
Questions
How big is the Jukebox io PCB?
It measures 60.6 × 108 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Jukebox io use?
153 parts, built around the RP2040, R-783.3-1.0, R-785.0-1.0 and MAX7313AEG+. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Jukebox io KiCad files?
From the adeboni/math-camp-synth repository on GitHub, at the commit this page was made from: the board is 2025-Jukebox/hardware/jukebox_io/jukebox_io.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Jukebox io design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).