

Esp shield
Burning Man Math Camp Synthesizers
- Size
- 68.6 × 53.3 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 114
- Pads
- 441
- Tracks, vias
- 739, 64
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Aug 2022
- Updated
- 29 Oct 2026
Overview
Esp shield is an open-source printed circuit board by adeboni, from the adeboni/math-camp-synth repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 68.6 × 53.3 mm with 86 parts on 114 nets, routed with 739 tracks and 64 vias.
It is built around the TSR 2-2450, MAX7313AEG+ and PCM5100APW, with the SN74LVC8T245PW and MMBT3904 among its other parts. Its parts include 41 resistors, 19 capacitors, 11 connectors, 6 ICs and 2 transistors.
Main components
5TSR 2-2450
SIP,14x7.5mm-40℃~+85℃ 1 10.16mm 13.97mm 1mA 2A 410kHz 50mVp-p 5V 6.5V~36V 600uF 7.62mm 94% Short Circuit Protection、Over-temperature protection、Automatic fault recovery、Overload protection Step-down type ±2% SIP,14x7.5mm DC-DC Power Modules ROHSTRACO POWERDC-DC Power ModulesMAX7313AEG+
SSOP-24-150mil-40℃~+125℃ 16 2V~3.6V 400kHz Cascading and address extension、Built-in LED driver、PWMOptocouplers I2C Interrupt Output SSOP-24-150mil I/O Expanders ROHSMaxim Integrated (Analog Devices)I/O ExpandersPCM5100APW
TSSOP-20-40℃~+130℃ 1.8V~3.3V 2 32 384kHz 50MHz Audio Decoder I2S TSSOP-20 ADCs/DACs - Special Purpose ROHSTexas InstrumentsADCs/DACs - Special PurposeSN74LVC8T245PW
TSSOP-24-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V 8 Bidirectional CMOS CMOS Tri-State TSSOP-24 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersMMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
README
README.mdBurning Man Math Camp Synths
2022: Pendulum
2023: Jukebox
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | 5.1k | Resistor_SMD:R_0603_1608Metric | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +19 |
| 6 | 22u | Capacitor_SMD:C_1206_3216Metric | C12, C13, C14, C15, C16, C17 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C3, C6, C18, C19 |
| 4 | MountingHole_3.2mm | Arduino_MountingHole:MountingHole_3.2mm | MH1, MH2, MH3, MH4 |
| 3 | 10u | Capacitor_SMD:C_0603_1608Metric | C2, C8, C11 |
| 3 | MAX7313 | Package_DFN_QFN:TQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias | U4, U5, U6 |
| 2 | 10k | Potentiometer_SMD:Potentiometer_Bourns_3314G_Vertical | RV1, RV2 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R6, R8 |
| 2 | 2.2n | Capacitor_SMD:C_0603_1608Metric | C9, C10 |
| 2 | 2.2u | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 220 | Resistor_SMD:R_0603_1608Metric | R5, R7 |
| 2 | 470 | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 1u | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J2 |
| 1 | AudioJack3 | Connector_Audio:Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal | J5 |
| 1 | Conn_02x12_Odd_Even | Connector_IDC:IDC-Header_2x12_P2.54mm_Vertical | J11 |
| 1 | DISPLAY_1 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J6 |
| 1 | DISPLAY_2 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J7 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | Digital/PWM | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J4 |
| 1 | FerriteBead | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | HEAD_LEDS | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J9 |
| 1 | MOUTH_LEDS | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J10 |
| 1 | PCM5100A | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | Power | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J1 |
| 1 | ROTARY_SWITCH | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J8 |
| 1 | SN74LVC8T245 | Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm | U2 |
| 1 | TSR2-2450 | Converter_DCDC:Converter_DCDC_TRACO_TSR2-xxxx_THT | U3 |
More from adeboni/math-camp-synth
12- 2 layers280 × 65 mm

- 2 layers280 × 65 mm

- 2 layers100 × 100 mm

- 2 layers70.8 × 108 mm

- 2 layers60.6 × 108 mm

- 4 layers50.5 × 100 mm

- 2 layers100 × 100 mm

- 2 layers40.3 × 108 mm

- 2 layers40.3 × 100 mm

- 2 layers100 × 100 mm

- 2 layers30.1 × 18.3 mm

- 2 layers19.7 × 99.7 mm

Similar boards
- 2 layers148.6 × 24.1 mm

- 2 layers85 × 27 mm

MAX7313 port expander
eta-systems/MAX7313-breakout
Breakout Board for MAX7313 16 Channel Port Expander with 4 bit PWM
50 parts1 - 4 layers38.1 × 100 mm

- 4 layers91.2 × 100 mm

- 4 layers87.9 × 95.8 mm

Fosdem dual capture
FOSDEM/video
No longer being updated, please see the README for pointers.
215 parts114 - 4 layers60 × 110 mm

- 4 layers60 × 110 mm

Retrospector Components
dchwebb/Kishoof
Eurorack Wavetable Synthesizer; Dual channel; 64MB internal storage accessed via USB
123 parts17 - 2 layers60 × 110 mm

AddaTone components
dchwebb/Addatone
Eurorack Additive Oscillator based on Lattice FPGA and ARM MCU
95 parts13
Questions
How big is the Esp shield PCB?
It measures 68.6 × 53.3 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Esp shield use?
86 parts, built around the TSR 2-2450, MAX7313AEG+, PCM5100APW and SN74LVC8T245PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp shield KiCad files?
From the adeboni/math-camp-synth repository on GitHub, at the commit this page was made from: the board is 2027-Jukebox/esp_shield/esp_shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp shield design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).