Skip to the content
2 layers34.4 × 33.1 mmAir sensor board, the printed circuit board in 3D

A low-power air sensor board (temperature and humidity) based on the Nordic nRF54L15 SoC, designed to run as a Matter device.

Size
34.4 × 33.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
40
Pads
81
Tracks, vias
76, 52
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
2 Nov 2026
Updated
2 Nov 2026

Overview

Air sensor board is an open-source printed circuit board by adammat02, from the adammat02/air_sensor_board repository on GitHub. It is a 2-layer board of 34.4 × 33.1 mm with 19 parts on 40 nets, routed with 76 tracks and 52 vias.

It is built around the AN54LQ-U15, ABS07-32.768KHZ-7-T and AO3415A, with the DS1092-10-W6L-R among its other parts. Its parts include 3 capacitors, 3 resistors, 2 ICs, 1 diode and 1 transistor. It belongs with the sensors and measurement boards of this library.

Main components

4

README

README.md

Air Sensor Board

A low-power air sensor board (temperature and humidity) based on the Nordic nRF54L15 SoC, designed to run as a Matter device.

The hardware is designed in KiCad.

Features

  • MCU: Nordic nRF54L15 (2.4 GHz radio, Thread / Bluetooth LE)
  • Sensor: Sensirion SHT3x digital temperature and humidity sensor (I²C)
  • Status LED: indicates device state (pairing, network connection, errors)
  • Button: user input (e.g. commissioning, factory reset)
  • External flash memory: extra storage, e.g. for OTA firmware updates (DFU)
  • Antenna: 2.4 GHz PCB antenna
  • Power: CR2032 coin cell battery
  • Battery monitoring: battery voltage measured with the built-in SAADC
  • Clocks: two external crystal oscillators
    • high-frequency crystal (HFXO, 32 MHz) for the radio and high-speed clock
    • low-frequency crystal (LFXO, 32.768 kHz) for low-power timekeeping in sleep modes

Matter

The board is built to work in a Matter network, using Thread as the transport and Bluetooth LE for commissioning. It is meant to report temperature, humidity, and battery level to a Matter controller (e.g. Apple Home, Google Home, Home Assistant).

Repository layout

FileDescription
air_sensor_board.kicad_proKiCad project
air_sensor_board.kicad_schSchematic
air_sensor_board.kicad_pcbPCB layout

Tools

Parts

19
QtyValueFootprintReferences
2100nFCapacitor_SMD:C_0603_1608MetricC1, C2
210kRResistor_SMD:R_0603_1608MetricR2, R3
132.768KHzEasyEDA:OSC-SMD_L3.2-W1.5X1
1330RResistor_SMD:R_0603_1608MetricR1
14.7uFCapacitor_SMD:C_0603_1608MetricC3
14.7uHInductor_SMD:L_0603_1608MetricL2
1AN54LQ-U15raytac:AN54LQ-U15U2
1AO3415AEasyEDA:SOT-23-3_L2.9-W1.6-P1.90-LS2.8-BRQ1
1Conn_01x03_SocketConnector_JST:JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_HorizontalJ1
1DS1092-10-W6L-REasyEDA:BAT-SMD_79527141BT1
1LEDLED_SMD:LED_0805_2012MetricD1
1SHT4xSensor_Humidity:Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPadU1
1SW_PushButton_Switch_SMD:SW_SPST_PTS810SW1

The 15 most common of 19 parts.

Similar boards

  • 6 layers133 × 92 mmMotherboard, the printed circuit board in 3D

    Motherboard

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    264 parts4.3kMIT
  • 2 layers100 × 63.7 mmFcart, the printed circuit board in 3D

    Fcart

    hi0t/fcart

    Open source flash cartridge

    115 parts23GPL-3.0
  • 6 layers44.5 × 36 mmDefcon-34-v3, the printed circuit board in 3D

    Defcon-34-v3

    bunnie/dc34-core-hw

    Core module hardware design

    187 parts10CERN-OHL-W-2.0
  • 2 layers65 × 45 mmSticky pi hat, the printed circuit board in 3D

    Sticky pi hat

    sticky-pi/sticky-pi-device

    Hardware and software for the Sticky Pi devices

    41 parts4
  • 4 layers100.2 × 55.7 mmAllwinner v3s 1, the printed circuit board in 3D

    Allwinner v3s 1

    Rynxie/tdrf-lorawan-gateway-pcb

    A custom-designed, open-source LoRaWAN gateway PCB powered by the Allwinner V3s ARM Cortex-A7 processor and the Semtech SX1302 LoRa concentrator.

    236 parts2
  • 4 layers158.4 × 66 mmSketchingpad proto2, the printed circuit board in 3D

    Sketchingpad proto2

    todbot/sketchingpad

    Capsense touch BLE pad for Sketching

    84 parts1GPL-3.0

Questions

How big is the Air sensor board PCB?

It measures 34.4 × 33.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Air sensor board use?

19 parts, built around the AN54LQ-U15, ABS07-32.768KHZ-7-T, AO3415A and DS1092-10-W6L-R. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Air sensor board KiCad files?

From the adammat02/air_sensor_board repository on GitHub, at the commit this page was made from: the board is air_sensor_board.kicad_pcb and its schematic air_sensor_board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Air sensor board design in my own project?

Its repository states no licence, so its author keeps all rights: ask adammat02 before reusing the design.