

Powerboard
The hand
- Size
- 170 × 90 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 40
- Nets
- 106
- Pads
- 267
- Tracks, vias
- 371, 35
- Pours
- 9
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Jun 2026
- Updated
- 21 Aug 2026
Overview
Powerboard is an open-source printed circuit board by Adamh-Tech, from the Adamh-Tech/PCB repository on GitHub. It is a 2-layer board of 170 × 90 mm with 40 parts on 106 nets, routed with 371 tracks and 35 vias.
It is built around the SN74ACT245NSR, SN74LVC245ADW and TEENSY 4.1. Its parts include 12 capacitors, 7 ICs, 7 connectors, 4 resistors and 2 inductors. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
Main components
3SN74ACT245NSR
SO-20-208mil-40℃~+85℃ 24mA 24mA 4.5V~5.5V 40uA 4ns@5V,50pF 74ACT 8 Bidirectional Tri-State SO-20-208mil Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversSN74LVC245ADW
SOIC-20-300mil-40℃~+125℃ 1 1.65V~3.6V 24mA 24mA 3.8ns@3.3V,50pF 30uA 74LVC 8 Bidirectional Tri-State SOIC-20-300mil Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsBuffers, Drivers, Receivers, TransceiversTEENSY 4.1
Development Boards & Kits - ARM ModuleSparkFun ElectronicsUncategorised
Parts
40| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22uF | Capacitor_SMD:C_1206_3216Metric | C4, C5, C9, C10 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4 |
| 3 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2, J3, J6 |
| 2 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C7 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C11, C12 |
| 2 | 10uF | Capacitor_SMD:C_1210_3225Metric | C1, C6 |
| 2 | 30.1k | Resistor_SMD:R_0603_1608Metric | R1, R3 |
| 2 | AP63301WU-7 | AP63301WU:SOT95P280X100-6N | IC2, IC3 |
| 2 | SN74ACT245NSR | SN74ACT245NSR:NS20 | U1, U2 |
| 2 | SN74LVC245ADW | SN74LVC245ADW:DW20 | U3, U4 |
| 2 | Screw_Terminal_01x12 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-12-2.54_1x12_P2.54mm_Horizontal | J4, J5 |
| 1 | 158k | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 4.7uH | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L2 |
| 1 | 47pf | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 56pf | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 6.8uH | Inductor_SMD:L_Bourns_SRP7028A_7.3x6.6mm | L1 |
| 1 | 93.1k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal | J7 |
| 1 | Screw_Terminal_01x06 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-6-2.54_1x06_P2.54mm_Horizontal | J1 |
| 1 | TEENSY_4.1 | TEENSY_4.1:TEENSY41 | IC1 |
More from Adamh-Tech/PCB
1- 2 layers

Similar boards
- 4 layers165.9 × 110 mm

CoPicoVision
thorpej/CoPicoVision
A ColecoVision clone using a Raspberry Pi Pico and pico9918 for video
118 parts13 - 2 layers118.1 × 101.6 mm

Teensy eurorack
newdigate/teensy-eurorack
Hardware Design: Eurorack shield for teensy 4.1 with 14 in / 16 out analog channels
102 parts259MIT - 2 layers240 × 240 mm

- 2 layers304.8 × 170.8 mm

- 2 layers66.5 × 36.5 mm

- 2 layers312 × 140 mm

- 2 layers316 × 119 mm

Teensy Grovebox
jerry20091103/Teensy_Grovebox
A portable synth and music multi-tool made with Teensy 4.1
142 parts150MIT - 2 layers304.8 × 95.2 mm

LMN
FundamentalFrequency/LMN-3-ECAD
Electrical CAD Files for the LMN-3 Project
106 parts106CC-BY-SA-4.0
Questions
How big is the Powerboard PCB?
It measures 170 × 90 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Powerboard use?
40 parts, built around the SN74ACT245NSR, SN74LVC245ADW and TEENSY 4.1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Powerboard KiCad files?
From the Adamh-Tech/PCB repository on GitHub, at the commit this page was made from: the board is Powerboard/Powerboard.kicad_pcb and its schematic Powerboard/3v3_Stepdown.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Powerboard design in my own project?
Its repository states no licence, so its author keeps all rights: ask Adamh-Tech before reusing the design.