
Alarm panel breakout
abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED

R5v: 1.9K for the red LED, 3.9K for the blue LED
Simple button breakout is an open-source printed circuit board by abzman, from the abzman/esp-IoT-boards repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 75.3 × 60.3 mm with 87 parts on 53 nets, routed with 425 tracks and 66 vias.
It is built around the ESP32-WROOM-32U, BME280 and UJ2-MIBH-G-SMT-TR. Its parts include 43 resistors, 18 capacitors, 16 connectors, 2 ICs and 1 diode. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
R5v: 1.9K for the red LED, 3.9K for the blue LED
Cfilter: 30pF Rfilter: 4.7K
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | Cfilter | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18 |
| 12 | Conn_01x03 | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J4, J5, J6, J7, J8, J9, J10, J11, J12, J13, J14, J15 |
| 12 | R5v | Resistor_SMD:R_0603_1608Metric | R8, R11, R14, R17, R20, R23, R26, R29, R32, R35, R38, R41 |
| 12 | Rfilter | Resistor_SMD:R_0603_1608Metric | R10, R13, R16, R19, R22, R25, R28, R31, R34, R37, R40, R43 |
| 12 | Rgpio | Resistor_SMD:R_0603_1608Metric | R9, R12, R15, R18, R21, R24, R27, R30, R33, R36, R39, R42 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C6 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R5, R6 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 12K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 2.2K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 22uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5 |
| 1 | 4.7K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 5K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J3 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-32U | RF_Module:ESP32-WROOM-32U | U1 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LOGO | Evan's misc parts:OSHW gear | G*** |
| 1 | LOGO | Evan's misc parts:Evan Logo | G*** |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | SW_MEC_5E | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | UJ2-MIBH-G-SMT-TR | Evan's misc parts:UJ2MIBHGSMTTR | J16 |
| 1 | bme280 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
The 83 most common of 87 parts.

abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED

abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED

abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED

abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED






IEEE-VIT/Iot-Data-Acquisiton-Board
The 2-Layer IoT Data Acquisition Board is an ESP32-based PCB designed for precision environmental monitoring. It integrates MQ-6 and BME280 sensors with an ADS1115 16-bit ADC and MCP6002 .

sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
It measures 75.3 × 60.3 mm and has 2 copper layers, 1.6 mm thick.
87 parts, built around the ESP32-WROOM-32U, BME280 and UJ2-MIBH-G-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the abzman/esp-IoT-boards repository on GitHub, at the commit this page was made from: the board is simple_button_breakout/simple_button_breakout.kicad_pcb and its schematic alarm_panel_breakout/12v_Buffered_Input.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).