
Simple button breakout
abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED

R5v: 1.9K for the red LED, 3.9K for the blue LED
Alarm panel breakout is an open-source printed circuit board by abzman, from the abzman/esp-IoT-boards repository on GitHub, published under the Unlicense licence. It is a 2-layer board of 99.7 × 99.7 mm with 116 parts on 80 nets, routed with 496 tracks and 90 vias.
It is built around the ESP32-WROOM-32U and BME280. Its parts include 52 resistors, 19 capacitors, 16 transistors, 12 connectors and 4 diodes. It belongs with the interfaces and adapters boards and the ESP32 boards of this library.
R5v: 1.9K for the red LED, 3.9K for the blue LED
Cfilter: 30pF Rfilter: 4.7K
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 10K | Resistor_SMD:R_0603_1608Metric | R2, R5, R11, R13, R15, R18, R21, R24, R27, R30, R33, R36, R39, R42, R45, R48 +3 |
| 16 | 1K | Resistor_SMD:R_0603_1608Metric | R8, R10, R12, R14, R17, R20, R23, R26, R29, R32, R35, R38, R41, R44, R47, R50 |
| 16 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9, Q10, Q11, Q12, Q13, Q14, Q15, Q16 |
| 14 | 4.7K | Resistor_SMD:R_0603_1608Metric | R3, R16, R19, R22, R25, R28, R31, R34, R37, R40, R43, R46, R49, R52 |
| 13 | C | Capacitor_SMD:C_0603_1608Metric | C7, C8, C9, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C6 |
| 3 | 1N4148 | Diode_SMD:D_SOD-123F | D2, D3, D4 |
| 3 | sonoff_relay | Evan's misc parts:sonoff relay | K1, K2, K3 |
| 1 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4 |
| 1 | 12K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 12v bus | Connector_Phoenix_MC:PhoenixContact_MC_1,5_13-G-3.5_1x13_P3.50mm_Horizontal | J10 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 2.2K | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 22uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5 |
| 1 | 5K | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 5v bus | Connector_Phoenix_MC:PhoenixContact_MC_1,5_13-G-3.5_1x13_P3.50mm_Horizontal | J12 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J9 |
| 1 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | Conn_02x05_Odd_Even | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J1 |
| 1 | ESP32-WROOM-32U | RF_Module:ESP32-WROOM-32U | U1 |
| 1 | Input Mains | Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.81_1x03_P3.81mm_Horizontal | J4 |
| 1 | LD1117S33TR_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | LOGO | Evan's misc parts:Evan Logo | G*** |
| 1 | LOGO | Evan's misc parts:OSHW gear | G*** |
| 1 | RED LED | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Relay 1 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.81_1x03_P3.81mm_Horizontal | J6 |
| 1 | Relay 2 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.81_1x03_P3.81mm_Horizontal | J7 |
| 1 | Relay 3 | Connector_Phoenix_MC:PhoenixContact_MC_1,5_3-G-3.81_1x03_P3.81mm_Horizontal | J8 |
| 1 | SW_MEC_5E | Button_Switch_THT:SW_TH_Tactile_Omron_B3F-10xx | SW1 |
| 1 | YAAJ_DCDC_StepDown_LM2596 | Evan's misc parts:YAAJ_DCDC_StepDown_LM2596 | U3 |
| 1 | bme280 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | gnd bus | Connector_Phoenix_MC:PhoenixContact_MC_1,5_13-G-3.5_1x13_P3.50mm_Horizontal | J13 |
| 1 | inputs | Connector_Phoenix_MC:PhoenixContact_MC_1,5_13-G-3.5_1x13_P3.50mm_Horizontal | J11 |
The 112 most common of 116 parts.

abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED

abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED

abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED

abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED


IEEE-VIT/Iot-Data-Acquisiton-Board
The 2-Layer IoT Data Acquisition Board is an ESP32-based PCB designed for precision environmental monitoring. It integrates MQ-6 and BME280 sensors with an ADS1115 16-bit ADC and MCP6002 .

sudomesh/disaster-radio
A (paused) work-in-progress long-range, low-bandwidth wireless disaster recovery mesh network powered by the sun.

freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project



evezor/tobor_v00
Tobor (robot spelled backwards), was built to be the most versatile open-source robotics system
It measures 99.7 × 99.7 mm and has 2 copper layers, 1.6 mm thick.
116 parts, built around the ESP32-WROOM-32U and BME280. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the abzman/esp-IoT-boards repository on GitHub, at the commit this page was made from: the board is alarm_panel_breakout/alarm_panel_breakout.kicad_pcb and its schematic alarm_panel_breakout/12v_Buffered_Input.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Unlicense licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).