2 layers86.4 × 61 mm
2 layers35 × 100 mm
ESP12-Smart Remote
dipenarathod/ESP12-Smart-RemoteESP12 Smart Remote
- Size
- 35 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 37
- Pads
- 138
- Tracks, vias
- 383, 49
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 12 Aug 2022
- Updated
- 22 May 2025
Overview
ESP12-Smart Remote is an open-source printed circuit board by dipenarathod, from the dipenarathod/ESP12-Smart-Remote repository on GitHub. It is a 2-layer board of 35 × 100 mm with 46 parts on 37 nets, routed with 383 tracks and 49 vias.
It is built around the ESP-12E, AMS1117-3.3 and UJ2-MIBH-G-SMT-TR. Its parts include 16 resistors, 8 connectors, 7 switches, 5 capacitors and 3 ICs. It belongs with the ESP8266 boards of this library.
Main components
3
ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUJ2-MIBH-G-SMT-TR
SMD-30℃~+85℃ 1 500mA、1.8A 5P 5V Black Female Micro-B Surface Mount,Vertical USB 2.0 SMD USB Connectors ROHSCUIUSB Connectors
Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 4K7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R10, R11, R12, R14, R15, R16 |
| 6 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 5 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R5, R6, R7 |
| 3 | 10 uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1, C2, C5 |
| 2 | 10uF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 2 | 470 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9 |
| 2 | 5.1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
| 2 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1, D2 |
| 1 | 2.2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x02_Female | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x02_Male | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J7 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | ESP-12E | RF_Module:ESP-12E | U1 |
| 1 | IO1 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | IO2 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J4 |
| 1 | IO3 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | LOGO | Logos:SunAndMoon_15x15 | G*** |
| 1 | LOGO | ModdedCrown:9x7.4_crown | G*** |
| 1 | MCP73831-3-OT | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | SW_SPDT | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | SW7 |
| 1 | UJ2-MIBH-G-SMT-TR | Micro USB:CUI_UJ2-MIBH-G-SMT-TR | J6 |
| 1 | USB4125-GF-A_REVA2 | USB_C:GCT_USB4125-GF-A_REVA2 | J1 |
The 43 most common of 46 parts.
Similar boards
- 2 layers20.5 × 15.1 mm
- 2 layers50.9 × 17.8 mm
- 4 layers52.7 × 47.6 mm
Esp8266 atmosphere sensor
abzman/esp-IoT-boards
R5v: 1.9K for the red LED, 3.9K for the blue LED
62 parts9Unlicense - 2 layers101.6 × 147.3 mm
Karabas pro revER
andykarpov/karabas-pro
FPGA based retrocomputer with FDD and HDD controllers
223 parts37MIT - 2 layers68.5 × 53.3 mm
Iot wifi uno hw
iotmakervn/iot-wifi-uno-hw
Open hardware ESP8266 Uno board - Internet Of Things WiFi Uno
56 parts26 - 2 layers26.4 × 17.3 mm
Knock homekit v1
andrewngai/HomekitKnock
This repo is the resources for the project on https://youtu.be/X5OxuFtGn0
12 parts17 - 2 layers
Smol boy V1
BogdanTheGeek/ESP_RC
An Open-Source Transmitter/Receiver for RC Planes, Cars, Boats and more based on ESP-NOW
21 parts16BSD-2-Clause
Questions
How big is the ESP12-Smart Remote PCB?
It measures 35 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ESP12-Smart Remote use?
46 parts, built around the ESP-12E, AMS1117-3.3 and UJ2-MIBH-G-SMT-TR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ESP12-Smart Remote KiCad files?
From the dipenarathod/ESP12-Smart-Remote repository on GitHub, at the commit this page was made from: the board is ESP12 Smart Remote/ESP12 Smart Remote.kicad_pcb and its schematic ESP12 Smart Remote/ESP12 Smart Remote.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ESP12-Smart Remote design in my own project?
Its repository states no licence, so its author keeps all rights: ask dipenarathod before reusing the design.