Skip to the content
2 layers54 × 69 mmMotor driver, the printed circuit board in 3D

Merrick Summers' repo for his lab assignment files for his Fall 2026 mechatronics class.

Size
54 × 69 mm
Copper layers
2
Thickness
1.6 mm
Parts
22
Nets
23
Pads
56
Tracks, vias
58, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
24 Oct 2026
Updated
29 Oct 2026

Overview

Motor driver is an open-source printed circuit board by aMerricke, from the aMerricke/enme441-labs repository on GitHub. It is a 2-layer board of 54 × 69 mm with 22 parts on 23 nets, routed with 58 tracks and 0 vias.

It is built around the IRLB8721PBF. Its parts include 6 resistors, 5 diodes, 3 connectors, 2 transistors and 1 capacitor. It belongs with the robots and motor control boards and the ESP32 and RISC-V boards of this library.

Main components

1

Parts

22
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
2100Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R4
210kResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR2, R5
21N5819Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD4, D5
2470Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR3, R6
2IRLB8721PBFPackage_TO_SOT_THT:TO-220-3_VerticalQ1, Q2
2LEDLED_THT:LED_D5.0mmD2, D3
1100uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC1
11N5822Diode_THT:D_DO-201AD_P15.24mm_HorizontalD1
1BATTERYTerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ1
1ESP32-C3-SuperMiniESP32C3-SuperMini:ESP32-C3-SuperMiniU1
1MOTOR_01TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ2
1MOTOR_02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ3

Similar boards

  • 2 layers50.8 × 28.6 mmBeaglebone obd, the printed circuit board in 3D

    Beaglebone obd

    KoffeinFlummi/rustbucket

    Access your car's diagnostics with a BeagleBone Blue and Rust.

    20 parts60GPL-3.0
  • 2 layers99.1 × 99.1 mm3D Scanner, the printed circuit board in 3D

    3D Scanner

    nazzrim/Open3DScanner

    Open3DScanner 3D Scanner design

    33 parts60
  • 2 layers36 × 31 mmESPDimmer, the printed circuit board in 3D

    ESPDimmer

    stelioskat/esp8266-led-dimmer

    Wifi enabled LED strip dimmer that is controlled using MQTT messages.

    11 parts20MIT
  • 2 layers70.3 × 30.2 mmControl pcb, the printed circuit board in 3D

    Control pcb

    kbob/filabilly-humidor

    Dehumidifier cabinet for printer filament

    16 parts9
  • 4 layers104.2 × 77.7 mmDc26, the printed circuit board in 3D

    Dc26

    dodgymike/dc26-monero-badge-pcb

    Defcon 26 Monero badge PCB

    714 parts6
  • 4 layers69.9 × 44.5 mmDoughLee2, the printed circuit board in 3D

    DoughLee2

    chl33/Dough133

    A temperature-controlled container for proofing and fermenting soughdough

    62 parts3MIT
  • 2 layers61 × 78.7 mmESP RGB LED, the printed circuit board in 3D

    ESP RGB LED

    Sean-AP/ESP-RGB-LED

    MicroPython module for controlling an RGB LED strip

    10 parts2
  • 2 layers33.8 × 49.5 mmEspAtomizerpcbv3rev1, the printed circuit board in 3D

    EspAtomizerpcbv3rev1

    Adamibus/ESPAtomizer-iOS

    This is a minimal KiCad 6/7 project skeleton. Open ESPAtomizer.kicadpro in KiCad.

    21 parts1

Questions

How big is the Motor driver PCB?

It measures 54 × 69 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Motor driver use?

22 parts, built around the IRLB8721PBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Motor driver KiCad files?

From the aMerricke/enme441-labs repository on GitHub, at the commit this page was made from: the board is lab7/motor_driver/motor_driver.kicad_pcb and its schematic lab7/motor_driver/motor_driver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Motor driver design in my own project?

Its repository states no licence, so its author keeps all rights: ask aMerricke before reusing the design.