2 layers246 × 237.5 mm
LCD Dummy Analog
ZigZagJoe/30Video-Support
Contains updated firmware and support utilities for the 30Video series of video cards.
11 parts9
2 layers59.3 × 42 mm
LCDAdapter
ZigZagJoe/30Video-Support9Contains updated firmware and support utilities for the 30Video series of video cards.
- Size
- 59.3 × 42 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 42
- Pads
- 137
- Tracks, vias
- 243, 82
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 28 Jun 2024
- Updated
- 6 Nov 2026
Overview
LCDAdapter is an open-source printed circuit board by ZigZagJoe, from the ZigZagJoe/30Video-Support repository on GitHub. It is a 2-layer board of 59.3 × 42 mm with 21 parts on 42 nets, routed with 243 tracks and 82 vias.
It is built around the FDN340P and MMBT3904. Its parts include 4 capacitors, 4 connectors, 2 resistors, 2 transistors and 2 inductors.
Main components
2README
readme.mdThis is the support repository for the 30Video series of video cards, by zigzagjoe.
https://68kmla.org/bb/index.php?threads/fs-30video-gs-internal-grayscale-for-se-30.47879/ https://68kmla.org/bb/index.php?threads/30video-new-video-board-for-se-30-iisi-more.47649/
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 22uF | SockeBooster:R_0805_2012Metric_HandSolder_XL | C2, C4, C5, C6 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 600Ω@100MHz | Inductor_SMD:L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1, L2 |
| 2 | ToolH | SockeBooster:JLC_ToolHole | H2, H3 |
| 1 | 10K | SockeBooster:Bourns 3306F1103 | RV1 |
| 1 | 1A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 532610871 | SockeBooster:Molex 532610871 | J5 |
| 1 | Conn_01x06_Pin | SockeBooster:Hybrid BergJST-XH-6 + Brightness | J2 |
| 1 | Conn_01x50_MountingPin | SockeBooster:Molex 541325097_Handsolder | J3 |
| 1 | DF9-31S-1V32 | SockeBooster:Hirose DF9-31S-1V32 | J1 |
| 1 | DPS | SockeBooster:SolderJumper-2-Open 1MM | JP1 |
| 1 | FDN340P | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q2 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | MountingHole | MountingHole:MountingHole_4mm | H1 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP3 |
More from ZigZagJoe/30Video-Support
1Similar boards
- 4 layers46.8 × 34.8 mm
SmartWatch V4
Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.
74 parts258MIT - 2 layers85.4 × 56.5 mm
- 2 layers
Display pcb
alexanderenrique/smart_tbird
Smart Thunderbird vehicle electronics — ESP32 nodes, alternator delay, display, and tooling.
37 parts - 2 layers100 × 35 mm
- 10 layers224.5 × 160 mm
Haasoscope pro adc fpga board
drandyhaas/HaasoscopePro
Affordable 2 GHz 3.2 GS/s 12 bit open-source open-hardware expandable USB real-time oscilloscope
586 parts485MIT - 2 layers97 × 77.5 mm
ESPlant
CCHS-Melbourne/ESPlant
Environmental Sensor Plant - solar WiFi gardening/meteorological sensor using ESP8266
77 parts37 - 4 layers105 × 60 mm
Picocart64 v2
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
162 parts26 - 2 layers101.6 × 53.3 mm
Questions
How big is the LCDAdapter PCB?
It measures 59.3 × 42 mm and has 2 copper layers, 1.6 mm thick.
What parts does the LCDAdapter use?
21 parts, built around the FDN340P and MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LCDAdapter KiCad files?
From the ZigZagJoe/30Video-Support repository on GitHub, at the commit this page was made from: the board is lcd kit/LCDAdapter V1.4/LCDAdapter.kicad_pcb and its schematic lcd kit/LCD Dummy Analog V1.3/LCD Dummy Analog.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the LCDAdapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask ZigZagJoe before reusing the design.