2 layers68.6 × 53.3 mm
2 layers101.6 × 53.3 mm
Arduino MEGA 2560-Rev3
bobc/Arduino_KiCad22KiCad versions of Arduino projects
- Size
- 101.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 123
- Nets
- 112
- Pads
- 448
- Tracks, vias
- 1,747, 100
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 15 Apr 2017
- Updated
- 16 Apr 2017
Overview
Arduino MEGA 2560-Rev3 is an open-source printed circuit board by bobc, from the bobc/Arduino_KiCad repository on GitHub. It is a 2-layer board of 101.6 × 53.3 mm with 123 parts on 112 nets, routed with 1,747 tracks and 100 vias.
It is built around the ATMEGA16U2-MU, ATMEGA2560-16AU and LMV358IDGKR, with the LP2985-33DBVR, CD1206-S01575 and CG0603MLC-05E among its other parts. Its parts include 15 capacitors, 5 ICs, 4 inductors, 4 crystals and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7
ATMEGA16U2-MU
QFN-32-EP(5x5)-40℃~+85℃ 16KB 16MHz 2.7V~5.5V 22 512Byte 512Byte 8 Bit AVR Built-in FLASH QFN-32-EP(5x5) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
ATMEGA2560-16AU
TQFP-100(14x14)-40℃~+85℃ 10bit 16MHz 256KB 4.5V~5.5V 4KB 8 Bit 86 8KB AVR Built-in FLASH TQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LMV358IDGKR
UncategorisedUnknown maker
LP2985-33DBVR
SOT-23-5-55℃~+150℃@(Tj) 1 10uA 150mA 18V 3.3V 70dB@(1kHz) 90mV@(100mA) Fixed Over Current Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
CD1206-S01575
1206-55℃~+125℃ 150mA 1V@50mA 2.5uA@75V 400mW 4A 4ns 75V Standalone 1206 Switching Diodes ROHSBournsSwitching Diodes
CG0603MLC-05E
0603-55℃~+125℃ 0.2pF 1 10nA 30V 5V Bidirectional IEC 61000-4-2 0603 ESD and Surge Protection (TVS/ESD) ROHSBournsVaristors
FDN340P
SOT-23-55℃~+150℃ 1 P-Channel 1.5V 121pF 20V 2A 500mW 56pF 7.2nC@4.5V 70mΩ@4.5V 779pF P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
README
README.mdArduino projects converted to KiCad
This repository contains Eagle projects that have been automatically converted to KiCad (v4) format by eakit.
The conversion is as far as possible identical to the original, but some features of Eagle cannot be converted directly to KiCad.
They may (probably will) contain conversion errors - use at own risk!
If you find a conversion problem, please raise an issue here. In case of doubt, the Eagle project should be preferred.
If you find a problem with the design of a project, or wish to make a feature request, please do not raise an issue here, contact the original designers.
Copyright
Copyrights and license terms for each project are as specified by original author(s).
Trademarks
Please respect trademarks where applicable, and do not use without permission.
- "Arduino", "Genuino", and the Arduino logo are trademarks of Arduino AG. https://www.arduino.cc/en/Main/CopyrightNotice
eakit
eakit project: https://github.com/bobc/eakit
Parts
123| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | SmartPrj:C0603-ROUND | C2, C3, C4, C5, C6, C7, C8, C9, C11, C12 |
| 5 | 8x1F-H8.5 | SmartPrj:1X08 | ADCH1, ADCL1, COMMUNICATION1, POWER1, PWML1 |
| 4 | FIDUCIALMOUNT | SmartPrj:FIDUCIA-MOUNT | FD1, FD2, FD3, FD4 |
| 3 | 22p | SmartPrj:C0603-ROUND | C1, C14, C15 |
| 3 | YELLOW | led:CHIP-LED0805 | L2, RX1, TX1 |
| 2 | jumper:SJ | GROUND1, RESET-EN1 | |
| 2 | 10K | resistor-dil:CAT16 | RN1, RN5 |
| 2 | 1M | SmartPrj:R0603-ROUND | R1, R2 |
| 2 | 1k | resistor-dil:CAY16 | RN3, RN4 |
| 2 | 1u | SmartPrj:C0603-ROUND | C10, C13 |
| 2 | 3x2M | SmartPrj:2X03 | ICSP1, ICSP2 |
| 2 | 47u | rcl:PANASONIC_D | PC1, PC2 |
| 2 | CD1206-S01575 | diode:MINIMELF | D2, D3 |
| 2 | CG0603MLC-05E | varistor:CT_CN0603 | Z1, Z2 |
| 1 | 10x1F-H8.5 | SmartPrj:1X10 | JP6 |
| 1 | 16MHz | SmartPrj:QS | Y2 |
| 1 | 18x2F-H8.5 | SmartPrj:2X18 | XIO1 |
| 1 | 22R | resistor-dil:CAY16 | RN2 |
| 1 | 2x2M - NM | SmartPrj:2X02 | JP5 |
| 1 | ATMEGA16U2-MU | SmartPrj:MLF32 | IC4 |
| 1 | ATMEGA2560-16AU | SmartPrj:TQFP100 | IC3 |
| 1 | BLM21 | wuerth-elektronik:0805 | L1 |
| 1 | CSTCE16M0V53-R0 16MHZ | SmartPrj:RESONATOR | Y1 |
| 1 | DISCLAIMER | SmartPrj:DISCLAIMER | U$1 |
| 1 | FDN340P | zetex:SOT-23 | T1 |
| 1 | GREEN | led:CHIP-LED0805 | ON1 |
| 1 | LMV358IDGKR | linear:MSOP08 | IC7 |
| 1 | LP2985-33DBVR | SmartPrj:SOT23-DBV | IC6 |
| 1 | M7 | diode:SMB | D1 |
| 1 | MF-MSMF050-2 500mA | rcl:L1812 | F1 |
| 1 | NCP1117ST50T3G | linear:SOT223 | IC1 |
| 1 | POWERSUPPLY_DC21MMX | SmartPrj:POWERSUPPLY_DC-21MM | X1 |
| 1 | TS42031-160R-TR-7260 | SmartPrj:TS42 | RESET1 |
| 1 | USB-B_TH | SmartPrj:PN61729 | X2 |
| 1 | ~ | @V50 | @V50 |
| 1 | ~ | @V36 | @V36 |
| 1 | ~ | @V12 | @V12 |
| 1 | ~ | @V13 | @V13 |
| 1 | ~ | @V54 | @V54 |
| 1 | ~ | @V14 | @V14 |
| 1 | ~ | @HOLE6 | @HOLE6 |
| 1 | ~ | @V2 | @V2 |
| 1 | ~ | @V37 | @V37 |
| 1 | ~ | @V20 | @V20 |
| 1 | ~ | @V21 | @V21 |
| 1 | ~ | @V9 | @V9 |
| 1 | ~ | @V26 | @V26 |
| 1 | ~ | @V3 | @V3 |
| 1 | ~ | @V8 | @V8 |
| 1 | ~ | @V6 | @V6 |
| 1 | ~ | @V51 | @V51 |
| 1 | ~ | @V22 | @V22 |
| 1 | ~ | @V30 | @V30 |
| 1 | ~ | @V34 | @V34 |
| 1 | ~ | @V5 | @V5 |
| 1 | ~ | @V53 | @V53 |
| 1 | ~ | @V7 | @V7 |
| 1 | ~ | @V18 | @V18 |
| 1 | ~ | @V16 | @V16 |
| 1 | ~ | @HOLE1 | @HOLE1 |
| 1 | ~ | @V48 | @V48 |
| 1 | ~ | @V19 | @V19 |
| 1 | ~ | @V40 | @V40 |
| 1 | ~ | @V24 | @V24 |
| 1 | ~ | @HOLE4 | @HOLE4 |
| 1 | ~ | @HOLE5 | @HOLE5 |
| 1 | ~ | @V11 | @V11 |
| 1 | ~ | @V23 | @V23 |
| 1 | ~ | @V31 | @V31 |
| 1 | ~ | @V41 | @V41 |
| 1 | ~ | @V42 | @V42 |
| 1 | ~ | @V35 | @V35 |
| 1 | ~ | @HOLE2 | @HOLE2 |
| 1 | ~ | @V10 | @V10 |
| 1 | ~ | @V45 | @V45 |
| 1 | ~ | @V15 | @V15 |
| 1 | ~ | @V38 | @V38 |
| 1 | ~ | @V39 | @V39 |
| 1 | ~ | @V17 | @V17 |
| 1 | ~ | @V1 | @V1 |
The 109 most common of 123 parts.
More from bobc/Arduino_KiCad
1Similar boards
- 2 layers101.6 × 53.3 mm
- 2 layers101.6 × 53.3 mm
ADK MEGA 2560-REV3-append
sirkha/3D-Components
These are various components and assemblies that I have modeled for use in designing 3D printed objects.
100 parts - 2 layers
New Atmega 2560
RoyZeng0317/kicad
This is the kicad circuit diagram layout, it's have more layout in here.
74 parts - 2 layers68.6 × 53.3 mm
- 2 layers68.6 × 53.3 mm
Arduino uno r3
eduardogil-byte/projeto-integrador-componentes
Sistema de visão computacional para inspeção automatizada de lotes de PCBs, utilizando arquivos de fabricação e análise de imagens para verificar componentes.
120 parts - 2 layers68.6 × 53.3 mm
- 2 layers71.9 × 51 mm
- 2 layers101.6 × 53.3 mm
Questions
How big is the Arduino MEGA 2560-Rev3 PCB?
It measures 101.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arduino MEGA 2560-Rev3 use?
123 parts, built around the ATMEGA16U2-MU, ATMEGA2560-16AU, LMV358IDGKR and LP2985-33DBVR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino MEGA 2560-Rev3 KiCad files?
From the bobc/Arduino_KiCad repository on GitHub, at the commit this page was made from: the board is arduino-mega2560_R3-reference-design/kicad_Arduino_MEGA_2560-Rev3/Arduino_MEGA_2560-Rev3.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino MEGA 2560-Rev3 design in my own project?
Its repository states no licence, so its author keeps all rights: ask bobc before reusing the design.