Snavy-10/Arduino-UNO-PCBOdikro Evans is an open-source printed circuit board by Snavy-10, from the Snavy-10/Arduino-UNO-PCB repository on GitHub. It is a 2-layer board of 71.9 × 51 mm with 48 parts on 83 nets, routed with 2,112 tracks and 259 vias.
It is built around the ATMEGA328P-PU, LMV358IDGKR and LP2985-33DBVR, with the CD1206-S01575, CG0603MLC-05E and FDN340P among its other parts. Its parts include 10 capacitors, 4 resistors, 4 ICs, 3 diodes and 3 crystals. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 100n | Capacitor_SMD:C_0805_2012Metric | C1, C2, C4, C5, C6, C7 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | RN2C1, RN4C1 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric | C3, C8 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C9, C11 |
| 2 | 3X2 M | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | ICSP1, ICSP2 |
| 2 | 47U | Capacitor_SMD:CP_Elec_4x5.8 | PC1, PC2 |
| 2 | 8X1F-H8.5 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | IOL1, POWER1 |
| 2 | CD1206-S01575 | Diode_SMD:D_1206_3216Metric | D2, D3 |
| 2 | CG0603MLC-05E | Diode_SMD:D_0805_2012Metric | Z1, Z2 |
| 1 | 10K | Resistor_SMD:R_Array_Concave_4x0402 | RN1C1 |
| 1 | 10X1F-H8.5 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | 1OH1 |
| 1 | 16MHZ | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 1K | Resistor_SMD:R_Array_Concave_4x0402 | RN4D1 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | 22R | Resistor_SMD:R_Array_Concave_4x0402 | RN3A1 |
| 1 | 6X1F-H8.5 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | AD1 |
| 1 | ATMEGA16U2-MU(R) | Package_DFN_QFN:HVQFN-36-1EP_6x6mm_P0.5mm_EP3.9x3.9mm | U3 |
| 1 | ATMEGA328P-PU | Package_DIP:DIP-28_W7.62mm | ZU4 |
| 1 | BLM21 | Inductor_SMD:L_1206_3216Metric | L1 |
| 1 | EN | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | RESET-1 |
| 1 | FDN340P | Package_TO_SOT_SMD:SOT-23 | T1 |
| 1 | LMV358IDGKR | Package_TO_SOT_SMD:SuperSOT-8 | U5 |
| 1 | LP2985-33DBVR | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | M7 | Diode_SMD:D_SOD-128 | D1 |
| 1 | MF -MSMF050-2 500mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | NCP1117ST50T3G | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U1 |
| 1 | ON | LED_SMD:LED_0805_2012Metric | GREEN1 |
| 1 | POWERSUPPLY_DC21MMX | Connector_BarrelJack:BarrelJack_Horizontal | X1 |
| 1 | R | Resistor_SMD:R_Array_Concave_4x0402 | R3 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | RX | LED_SMD:LED_0603_1608Metric | YELLOW1 |
| 1 | SW_Push_SPDT | Button_Switch_SMD:SW_SPST_B3S-1000 | SW1 |
| 1 | TX | LED_SMD:LED_0603_1608Metric | YELLOW2 |
| 1 | USB_B_TH | Connector_USB:USB_Micro-B_Molex_47346-0001 | X2 |
eduardogil-byte/projeto-integrador-componentes
Sistema de visão computacional para inspeção automatizada de lotes de PCBs, utilizando arquivos de fabricação e análise de imagens para verificar componentes.
sirkha/3D-Components
These are various components and assemblies that I have modeled for use in designing 3D printed objects.
trfaa001/Potentiometer-pedals-to-USB
Arduino project that uses potentiometers as game pedals.
It measures 71.9 × 51 mm and has 2 copper layers, 1.6 mm thick.
48 parts, built around the ATMEGA328P-PU, LMV358IDGKR, LP2985-33DBVR and CD1206-S01575. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Snavy-10/Arduino-UNO-PCB repository on GitHub, at the commit this page was made from: the board is Odikro Evans.kicad_pcb and its schematic Odikro Evans.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Snavy-10 before reusing the design.