2 layers101.6 × 53.3 mm
2 layers68.6 × 53.3 mm
UNO TH Rev3e
NadjB/Hard_Arduino_and_Shield- Size
- 68.6 × 53.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 78
- Pads
- 321
- Tracks, vias
- 838, 82
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Apr 2022
- Updated
- 28 Feb 2024
Overview
UNO TH Rev3e is an open-source printed circuit board by NadjB, from the NadjB/Hard_Arduino_and_Shield repository on GitHub. It is a 2-layer board of 68.6 × 53.3 mm with 120 parts on 78 nets, routed with 838 tracks and 82 vias.
It is built around the ATMEGA328P-PU, LMV358IDGKR and LP2985-33DBVR, with the CD1206-S01575, CG0603MLC-05E and FDN340P among its other parts. Its parts include 11 capacitors, 5 inductors, 4 ICs, 4 crystals and 3 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
6
ATMEGA328P-PU
DIP-28-300mil-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH DIP-28-300mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
LMV358IDGKR
UncategorisedUnknown maker
LP2985-33DBVR
SOT-23-5-55℃~+150℃@(Tj) 1 10uA 150mA 18V 3.3V 70dB@(1kHz) 90mV@(100mA) Fixed Over Current Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTECH PUBLICVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
CD1206-S01575
1206-55℃~+125℃ 150mA 1V@50mA 2.5uA@75V 400mW 4A 4ns 75V Standalone 1206 Switching Diodes ROHSBournsSwitching Diodes
CG0603MLC-05E
0603-55℃~+125℃ 0.2pF 1 10nA 30V 5V Bidirectional IEC 61000-4-2 0603 ESD and Surge Protection (TVS/ESD) ROHSBournsVaristors
FDN340P
SOT-23-55℃~+150℃ 1 P-Channel 1.5V 121pF 20V 2A 500mW 56pF 7.2nC@4.5V 70mΩ@4.5V 779pF P-Channel SOT-23 MOSFETs ROHSonsemiMOSFETs
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 61 | TP_SP | UNO-TH_Rev3e:TP-SP | GND_TP1, GND_TP2, ORIGIN1, TP_0, TP_1, TP_2, TP_3, TP_3V3, TP_4, TP_5, TP_5V1, TP_5V2, TP_10, TP_11, TP_12, TP_13 +45 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C4, C5, C6, C7, C10 |
| 4 | MountingHole_3mm | MountingHole:MountingHole_3mm | H1, H2, H3, H4 |
| 3 | FIDUCIALMOUNT | Fiducial:Fiducial_1mm_Mask2mm | FD1, FD2, FD3 |
| 3 | YELLOW | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L3, RX1, TX1 |
| 2 | 1K | Resistor_SMD:R_Cat16-4 | RN2, RN4 |
| 2 | 1M | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 2 | 1u | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C8 |
| 2 | 22p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9, C11 |
| 2 | 3x2 M | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | ICSP1, ICSP2 |
| 2 | 47u | Capacitor_SMD:C_Elec_6.3x5.4 | PC1, PC2 |
| 2 | 8x1F-H8.5 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | IOL1, POWER1 |
| 2 | CD1206-S01575 | Diode_SMD:D_MiniMELF | D2, D3 |
| 2 | CG0603MLC-05E | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | Z1, Z2 |
| 2 | SJ | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | GROUND1, RESET-EN1 |
| 1 | 10K | Resistor_SMD:R_Cat16-4 | RN1 |
| 1 | 10uH | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L2 |
| 1 | 10x1F-H8.5 | Connector_PinSocket_2.54mm:PinSocket_1x10_P2.54mm_Vertical | IOH1 |
| 1 | 16MHz | UNO-TH_Rev3e:QS | Y1 |
| 1 | 22R | Resistor_SMD:R_Cat16-4 | RN3 |
| 1 | 2x2 M - NM | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | JP2 |
| 1 | 6x1F-H8.5 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | AD1 |
| 1 | ATMEGA16U2-MU(R) | Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm | U3 |
| 1 | ATMEGA328P-PU | Package_DIP:DIP-28_W7.62mm_Socket_LongPads | ZU4 |
| 1 | BLM21 | Inductor_SMD:L_0805_2012Metric_Pad1.05x1.20mm_HandSolder | L1 |
| 1 | CSTCE16M0V53-R0 16MHZ | UNO-TH_Rev3e:RESONATOR | Y2 |
| 1 | DNP | UNO-TH_Rev3e:FRAME | FRAME1 |
| 1 | FDN340P | Package_TO_SOT_SMD:SOT-23 | T1 |
| 1 | GREEN | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | ON1 |
| 1 | LMV358IDGKR | Package_SO:MSOP-8_3x3mm_P0.65mm | U5 |
| 1 | LP2985-33DBVR | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | M7 | Diode_SMD:D_SMB | D1 |
| 1 | MF-MSMF050-2 500mA | Fuse:Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder | F1 |
| 1 | NCP1117ST50T3G | Package_TO_SOT_SMD:SOT-223 | U1 |
| 1 | POWERSUPPLY_DC21MMX | UNO-TH_Rev3e:POWERSUPPLY_DC-21MM | X1 |
| 1 | TS42031-160R-TR-7260 | UNO-TH_Rev3e:TS42 | RESET1 |
| 1 | USB-B_TH | UNO-TH_Rev3e:PN61729 | X2 |
More from NadjB/Hard_Arduino_and_Shield
4- 2 layers101.6 × 53.3 mm
- 2 layers101.6 × 53.3 mm
- 4 layers68.6 × 53.3 mm
Similar boards
- 2 layers68.6 × 53.3 mm
Arduino uno r3
eduardogil-byte/projeto-integrador-componentes
Sistema de visão computacional para inspeção automatizada de lotes de PCBs, utilizando arquivos de fabricação e análise de imagens para verificar componentes.
120 parts - 2 layers71.9 × 51 mm
- 2 layers68.6 × 53.3 mm
- 2 layers68.6 × 53.3 mm
- 2 layers101.6 × 53.3 mm
ADK MEGA 2560-REV3-append
sirkha/3D-Components
These are various components and assemblies that I have modeled for use in designing 3D printed objects.
100 parts - 2 layers101.6 × 53.3 mm
- 2 layers68.6 × 53.3 mm
Leonardo Rev3e
trfaa001/Potentiometer-pedals-to-USB
Arduino project that uses potentiometers as game pedals.
61 partsGPL-3.0 - 2 layers68.6 × 53.3 mm
Questions
How big is the UNO TH Rev3e PCB?
It measures 68.6 × 53.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UNO TH Rev3e use?
120 parts, built around the ATMEGA328P-PU, LMV358IDGKR, LP2985-33DBVR and CD1206-S01575. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UNO TH Rev3e KiCad files?
From the NadjB/Hard_Arduino_and_Shield repository on GitHub, at the commit this page was made from: the board is Arduino UNO/Arduino UNO R3/UNO-TH_Rev3e.kicad_pcb and its schematic Arduino MEGA2560 Rev3e/Arduino Mega 2560 Rev3/MEGA2560_Rev3e.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UNO TH Rev3e design in my own project?
Its repository states no licence, so its author keeps all rights: ask NadjB before reusing the design.